summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2023-07-27arm64: zynqmp: Describe interrupts by using macrosMichal Simek1-75/+110
Use arm-gic.h and irq.h for interrupt description. It helps to improve readability of device tree file. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9d5bd17f37772be186cab17b06cc21351d36ff62.1688986332.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Fix dwc3 usb interrupt descriptionMichal Simek1-4/+4
Based on DT binding dwc_usb3 is single entry without anything else. That's why combination dwc3_usb3, otg is not allowed. That's why split it to host and peripheral pair which both points to the same IRQ. DWC3 code is reading these two properties first before generic dwc_usb3. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/6544d13afd9f3d8f5413e32684aa16e4d155e331.1687160244.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Add memory reserved node for k26 Kria SOM boardSharath Kumar Dasari1-0/+11
PMUFW (Power Management Unit firmware) requires top 1MB of the lower DDR memory reserved for its operation, this is missing in k26 SM static dts file. Bootloader or kernel shouldn't access this location. Signed-off-by: Sharath Kumar Dasari <sharath.kumar.dasari@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8ddc7fb4bf40faead7a015ad7e095f3f7d2ec191.1686555698.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Assign TSU clock frequency for GEMsHarini Katakam3-0/+6
Allow changing TSU clock for all GEMs. Kria SOM is using this functionality that's why set TSU clock frequency as 250MHz (minimum when running at 1G) to allow PTP functionality. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3b9285b50a2a4abb136ecb0873343a4e84626581.1686228675.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Setting default i2c clock frequency to 400kHzVaralaxmi Bingi1-0/+2
Setting default i2c clock frequency for ZynqMP to maximum rate of 400kHz. Current default value is 100kHz. Signed-off-by: Varalaxmi Bingi <varalaxmi.bingi@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3034ec006c8b11e025904d4cc2524255523636f6.1686227766.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Fix open drain warning on ZynqMPManikanta Guntupalli12-32/+32
Mark both GPIO lines as GPIO_OPEN_DRAIN which is required by i2c-gpio DT binding. Similar change was done by commit 8df80c1801c9 ("ARM: dts: exynos: Convert to new i2c-gpio bindings"). Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/a0faf488dde310e1c1c1a676c371e223db6bdca6.1686227712.git.michal.simek@amd.com
2023-07-10arm64: zynqmp: Add L2 cache nodesRadhey Shyam Pandey1-0/+10
Describe SoC L2 cache hierarchy. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/130e5a6acbee94809b63a61cde5450fbff88cc9c.1685964230.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Used fixed-partitions for QSPI in k26Michal Simek1-81/+88
Using fixed partitions is recommended way how to describe QSPI. Also add label for qspi flash memory to be able to reference it in future. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7368dc772d8dc29477a880ac2065e2ecb98cf3f5.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Add pmu interrupt-affinityRadhey Shyam Pandey1-0/+4
Based on dt-binding "This property should present when there is more than a single SPI" that's also case that's why explicitly specify interrupt affinity to avoid incorrect usage. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dde2e4b5ac6018adb9bfae05bb3800af6b7c0f0e.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Set qspi tx-buswidth to 4Amit Kumar Mahapatra11-11/+11
All ZynqMP boards are setting up tx-buswidth to 1. Due to this the framework only issues 1-1-1 write commands to the GQSPI driver. But the GQSPI controller is capable of handling 1-4-4 write commands, so updated the tx-buswidth to 4. Using all 4 lines will increase the tx data transfer rate, as now the tx data will be transferred on four lines instead on single line. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/1f1b0028106d83aa06e0777e91862a07df100fa1.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Fix usb node drive strength and slew rateAshok Reddy Soma10-18/+54
As per design, all input/rx pins should have fast slew rate and 12mA drive strength. Rest all pins should be slow slew rate and 4mA drive strength. Fix usb nodes as per this and remove setting of slow slew rate for all the usb group pins. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/379071f44ceb27a0e32d74e13221640922d989d1.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Describe TI phy as ethernet-phy-idMichal Simek6-46/+90
TI DP83867 is using strapping based on MIO pins. Tristate setup can influence PHY address. That's why switch description with ethernet-phy-id compatible string which enable calling reset. PHY itself setups phy address after power up or reset. Phy reset is done via gpio. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b49904649a363f40dc9c4d3fa275e42129562082.1684767562.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Switch to amd.com emailsMichal Simek24-27/+27
Update my and DPs email address to match current setup. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/108cbbbab29e13d386d38a779fd582f10844a030.1685443337.git.michal.simek@amd.com
2023-06-05arm64: zynqmp: Convert kv260-revA overlay to ASCII textMichal Simek1-3/+3
File was in UTF-8 format but there is no reason for it. Convert it to ASCII/plain text. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9161f4e1d449edd86e642b6769575b8e201fccf0.1684244418.git.michal.simek@amd.com
2023-05-16arm64: xilinx: Use zynqmp prefix for SOM dt overlaysMichal Simek1-8/+8
U-Boot is using zynqmp- prefix to compose DT name for board detection that's why also generate DT in this format in the kernel. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/49c1b8c992929610ba17b9c6edf5d40d4b28d2ed.1683033163.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add phase tags markingMichal Simek3-0/+21
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT. That's why add it also to Linux to be aligned with bootloader requirement. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/48b554aef75d11e6ad2ef7d21f22accb35432112.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Describe bus-width for SD card on KV260Michal Simek2-0/+2
SD card is connected with 4 data lines which should be described properly. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b4046d2f593047400c190e438fd9d05128c293d9.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Enable AMS on SOM and other zcu10x boardsMichal Simek5-0/+79
AMS is used for monitoring system. Used for measuring voltages and especially temperatures. Origin interface is IIO but via iio-hwmon it can be moved to hwmon framework too (done for SOM and zcu100). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e1e1621ac1cee7f36ef20606bb3795e130de9609.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Enable DP driver for SOMsMichal Simek2-2/+2
DP DMA is already enabled that's why there is no reason to keep DP disabled. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/15d16b4de933bfae108df6ca368eb2cdf916aa02.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Setup clock for DP and DPDMAMichal Simek3-0/+8
Clocks are coming from shared HW design where these frequencies should be aligned with PLL setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/807e22371394222f728ff7d6b190a96a12145439.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Switch to ethernet-phy-id in kv260Michal Simek2-4/+8
Use ethernet-phy-id compatible string to properly describe phy reset on kv260 boards. Previous description wasn't correct because reset was done for mdio bus to operate and it was in this case used for different purpose which was eth phy reset. With ethernet-phy-id phy reset happens only for the phy via phy framework. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4b139e942c2a808eecbb30226b6ea5303348390a.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2Piyush Mehta1-2/+0
The board zynqmp-zc1751-xm016-dc2 support only USB2.0 that's why remove USB3.0 DT configuration. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ad019501a851c5730427af948b636316f10b2e3b.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add pinctrl emmc description to SM-K26Michal Simek1-0/+20
Production SOM has emmc on it and make sense to describe pin description to be able use EMMC if it is not configured via psu_init. (Still some regs are not handled but this is one step in that direction) Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f61c16e2fd7c91c2be6d6b67c902037580dbd364.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add gpio labels for modepin gpioMichal Simek1-0/+4
Using label helps with better chip identification. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/12b2fcd94e528c8ca7117f6741aae36b5942b430.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add mtd partition for secure OS storage areaAmit Kumar Mahapatra1-4/+8
Update MTD partitions of Kria device trees to allocate 128KB of QSPI memory for secure OS. Increased "SHA256" partition size & changed starting address of "User" partition to accommodate the new partition "Secure OS Storage" Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20dd23821118999c6fec2bad52ea446d1a66fefb.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOMMichal Simek4-1/+7
With limited low level configuration done via psu-init only IPs connected on SOM are initialized and configured. All IPs connected to carrier card are not initialized. There is a need to do proper reset, pin configuration and also clock setting. The patch targets the last part which is setting up proper clock for EMMC on production SOMs and SD on kv260-revB. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/cf5a4e412e1674500a71a0b1eed7fa8393f37ae9.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add linux,code for gpio buttonSrinivas Neeli1-0/+3
BTN_MISC looks like the most reasonable option for this button. Button is used by firmware to indicate (after reset, power up) that user wants to do firmware upgrade via firmware update utility. For bootloader or OS is this just user button which is worth to have it mapped. Also button can be used as a wakeup source and pressing it for more time can generate more chars that's why also adding wakeup-source and autorepeat properties. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4e20661f43b1fb8432fa5fcda5c1cb50d0a27475.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOMMichal Simek1-0/+95
There are couple of IPs which are enabled in origin HW design which are missing in SOM dt. Add them to match default setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5d3777fdf91d114effe1921255a7ad71ef30d277.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Fix usb reset over bootmode pins on zcu100Michal Simek1-0/+2
The commit 53ba1b2bdaf7 ("arm64: dts: zynqmp: Add mode-pin GPIO controller DT node") added usb phy reset over bootmode pins by default on usb0 only. zcu100 is using usb0 as peripheral and usb1 as host. Unfortunately reset line is shared for both usb ulpi phys but usb_rst_b is connected to usb5744 hub which is used only in host mode. Especially this chip requires reset to operate properly that's why better assign gpio reset to usb1 instead of usb0. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/d117473da3bab39a82fe900cecd8ca78df9adeda.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Sync node name address with reg (mailbox)Michal Simek1-1/+1
Address in node name should match with the first reg property in DT. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5d8e80383912b8ff75409764efb75f3b85917087.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Add resets property to sdhci nodesSai Krishna Potthuri1-0/+2
Add "resets" property to sdhci nodes. Resets property is used to reset the SD host controller when dynamic configuration support is enabled. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8f8592d6454c024c8f8b92e56c9009c65ad1d54a.1683034376.git.michal.simek@amd.com
2023-05-16arm64: zynqmp: Rename ams_ps/pl node namesMichal Simek1-2/+2
Fix child node names to be aligned with commit 39dd2d1e251d ("dt-bindings: iio: adc: Add Xilinx AMS binding documentation") which requires names as ams-ps@ and ams-pl@. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/373136eccf8d22cdfb499adbc8d5f5510d6c1035.1683034376.git.michal.simek@amd.com
2023-05-12Revert "arm64: dts: zynqmp: Add address-cells property to interrupt controllers"Michal Simek1-2/+0
This reverts commit c6badbd2d321c19d4f55ee56b0ef12bb3352feac. Long time ago this was discussed with Rob at link below that there is no need to add address-cells to gpio and interrupt nodes that's why reverting this patch for ZynqMP. Also there is no visible DTC warning which was seen in past. Link: https://lore.kernel.org/r/91e3405245c89f134676449cf3822285798d2ed2.1612189652.git.michal.simek@xilinx.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/e3312910db0922bb8c24a8e681de41709ca11bdf.1683035456.git.michal.simek@amd.com
2023-05-12arm64: zynqmp: Change zc1275 board name to zcu1275Michal Simek2-3/+3
Internal board zc1275 was released also to public which ends up with adding missing 'u' to board name. Reflect this change by renaming DT files. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9b50c72c4e634b2c72758eed6275920eedbda06f.1683099606.git.michal.simek@amd.com
2023-05-12arm64: zynqmp: Add mali-400 gpu node for zynqmpParth Gajjar11-0/+51
Add mali-400 gpu node for zynqmp. Enabled gpu node for xilinx boards. Signed-off-by: Parth Gajjar <parth.gajjar@amd.com> Signed-off-by: Vishal Sagar <vishal.sagar@amd.com> Link: https://lore.kernel.org/r/20230321070619.29440-3-parth.gajjar@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-19arm64: dts: zynqmp: Add xlnx prefix to GEM compatible stringHarini Katakam1-4/+4
cdns,zynq/zynqmp/versal-gem was recently deprecated in Linux in favour of xlnx prefix. Add this new compatible string and remove the existing cdns,zynqmp-gem compatible string. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/578a4fcbb4143888af954996a45f5e1110e0ee50.1672909426.git.michal.simek@amd.com
2023-01-05arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsiMichal Simek2-8/+4
Remove clock-names from GEM nodes from clk-ccf because they should be only present in zynqmp.dtsi. And as is visible both clock-names defined didn't really match. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/24ce27f91a55ed04ca7ee2ff7db0c674702ef722.1670594284.git.michal.simek@amd.com
2023-01-05arm64: dts: zynqmp: Add mode-pin GPIO controller DT nodePiyush Mehta1-0/+8
Add mode-pin GPIO controller DT node in zynqmp.dtsi and wire it to usb0 controller. All Xilinx evaluation boards are using modepin gpio for ULPI reset that's why wire it directly in zynqmp instead of c&p the same line to every board specific file. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/69924a8e2c01e5a1d25d098adc53224ddb841f46.1670594085.git.michal.simek@amd.com
2023-01-05arm64: zynqmp: Enable hs termination flag for USB dwc3 controllerMichael Grzeschik1-0/+2
Since we need to support legacy phys with the dwc3 controller, we enable this quirk on the zynqmp platforms. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20221023215649.221726-1-m.grzeschik@pengutronix.de Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-05arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtsoAndrew Davis2-0/+0
DTB Overlays (.dtbo) can now be built from source files with the extension (.dtso). This makes it clear what is the content of the files and differentiates them from base DTB source files. Convert the DTB overlay source files in the arm64/xilinx directory. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221024173434.32518-7-afd@ti.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-05arm64: xilinx: Fix opp-table-cpuMichal Simek1-1/+1
OPP table name now should start with "opp-table" and OPP entries shouldn't contain commas and @ signs in accordance to the new schema requirement. The same change was done by commit c6d4a8977598 ("ARM: tegra: Rename CPU and EMC OPP table device-tree nodes"), commit ffbe853a3f5a ("ARM: dts: sunxi: Fix OPPs node name") or commit b7072cc5704d ("arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables"). Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3297772b58953e4afd91f7a4bd845713e36e1e27.1652713489.git.michal.simek@amd.com
2023-01-05arm64: dts: xilinx: align LED node names with dtschemaKrzysztof Kozlowski1-1/+1
The node names should be generic and DT schema expects certain pattern: xilinx/zynqmp-zcu100-revC.dtb: leds: 'vbus-det' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221125144136.477171-1-krzysztof.kozlowski@linaro.org Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-21Merge tag 'rproc-v6.2' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ...
2022-11-25arm64: dts: xilinx: zynqmp: Add RPU subsystem device nodeTanmay Shah1-0/+33
RPU subsystem can be configured in cluster-mode or split mode. Also each r5 core has separate power domains. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221114233940.2096237-3-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-10-21arm64: dts: zynqmp: zcu106a: Describe DisplayPort connectorLaurent Pinchart1-0/+20
Add a device tree node to describe the DisplayPort connector, and connect it to the DPSUB output. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@amd.com>
2022-10-21arm64: dts: zynqmp: Add ports for the DisplayPort subsystemLaurent Pinchart1-0/+24
The DPSUB DT bindings now specify ports to model the connections with the programmable logic and the DisplayPort output. Add them to the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michal Simek <michal.simek@amd.com>
2022-06-23arm64: dts: xilinx: align gpio-key node names with dtschemaKrzysztof Kozlowski5-5/+5
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-30-krzysztof.kozlowski@linaro.org Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-23arm64: dts: zynqmp: add AMS driver to device treeRobert Hancock2-0/+30
Add an entry to the ZynqMP device tree to support the AMS device which now has a driver in mainline. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20220120010246.3794962-2-robert.hancock@calian.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-06-23arm64: zynqmp: Fix comment about number of gpio line namesMichal Simek1-1/+1
ZynqMP has 174 gpio lines connected to PS controller but DT is describing them from 0 to 173 not 174. Fixes: 7a4c31ee877a ("arm64: zynqmp: Add support for Xilinx Kria SOM board") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/c3480ba47ac9761903485ebfac127f297053d4da.1634289461.git.michal.simek@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-03-26Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 20:55:32 +0300