summaryrefslogtreecommitdiff
path: root/drivers/clk/at91/pmc.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-27clk: at91: pmc: add sama7g5 to the list of available pmcsClaudiu Beznea1-2/+3
Add SAMA7G5 to the list of available PMCs such that the suspend/resume code for clocks to be used on backup mode. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-7-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-27clk: at91: pmc: execute suspend/resume only for backup modeClaudiu Beznea1-0/+39
Before going to backup mode architecture specific PM code sets the first word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()). Thus take this into account when suspending/resuming clocks. This will avoid executing unnecessary instructions when suspending to non backup modes. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-3-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-27clk: at91: re-factor clocks suspend/resumeClaudiu Beznea1-140/+7
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured. The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-08clk: at91: check pmc node status before registering syscore opsClément Léger1-0/+5
Currently, at91 pmc driver always register the syscore_ops whatever the status of the pmc node that has been found. When set as secure and disabled, the pmc should not be accessed or this will generate abort exceptions. To avoid this, add a check on node availability before registering the syscore operations. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: allow setting PCKx parent via DTMichał Mirosław1-2/+10
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: optimize pmc data allocationMichał Mirosław1-26/+8
Alloc whole data structure in one block. This makes the code shorter, more efficient and easier to extend in following patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: pmc: decrement node's refcountClaudiu Beznea1-0/+1
of_find_matching_node() increment node's refcount. Call of_node_put() to decrement it after it was used. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1588508289-10140-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-27clk: at91: pmc: do not continue if compatible not locatedClaudiu Beznea1-0/+2
pmc_register_ops() is called for all AT91 devices. Return -ENODEV in case of_find_matching_node() returns NULL. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1588508289-10140-1-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-16clk: at91: fix possible deadlockAlexandre Belloni1-1/+1
Lockdep warns about a possible circular locking dependency because using syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use the recently introduced device_node_to_regmap to solve that as it looks up the regmap in the same list but doesn't care about the clocks. Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-17clk: at91: add new DT lookup functionAlexandre Belloni1-0/+34
Add a new DT lookup function to lookup for PMC clocks. Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the platforms are converted. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add pmc_data struct and helpersAlexandre Belloni1-0/+44
Add a new strut to handle references to all the PMC clocks and implement allocation/free helpers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2017-12-22clk: at91: pmc: Support backup for programmable clocksRomain Izard1-0/+35
When an AT91 programmable clock is declared in the device tree, register it into the Power Management Controller driver. On entering suspend mode, the driver saves and restores the Programmable Clock registers to support the backup mode for these clocks. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-22clk: at91: pmc: Save SCSR during suspendRomain Izard1-2/+2
The contents of the System Clock Status Register (SCSR) needs to be restored into the System Clock Enable Register (SCER). As the bootloader will restore some clocks by itself, the issue can be missed as only the USB controller, the LCD controller, the Image Sensor controller and the programmable clocks will be impacted. Fix the obvious typo in the suspend/resume code, as the IMR register does not need to be saved twice. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-22clk: at91: pmc: Wait for clocks when resumingRomain Izard1-8/+16
Wait for the syncronization of all clocks when resuming, not only the UPLL clock. Do not use regmap_read_poll_timeout, as it will call BUG() when interrupts are masked, which is the case in here. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-30clk: at91: Add sama5d2 suspend/resumeAlexandre Belloni1-0/+129
On sama5d2, VDD core maybe be cut while in suspend. This means registers will be lost. Ensure they are saved and restored properly. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: pmc: remove useless capacities handlingAlexandre Belloni1-128/+0
Capacities only handles interrupts and they are not use anymore. Remove the whole initialisation. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: pmc: drop at91_pmc_baseAlexandre Belloni1-7/+0
at91_pmc_base is not used anymore, remove it along with at91_pmc_read and at91_pmc_write. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17ARM: at91: pm: move idle functions to pm.cAlexandre Belloni1-15/+0
Avoid using code from clk/at91 for PM. This also has the bonus effect of setting arm_pm_idle for sama5 platforms. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-02-17clk: at91: pmc: move pmc structures to C fileAlexandre Belloni1-0/+9
pmc.c is now the only user of struct at91_pmc*, move their definition in the C file. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probeAlexandre Belloni1-25/+9
at91_pmc_init() doesn't do much anymore, merge it in atmel_pmc_probe(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: remove IRQ handling and use pollingAlexandre Belloni1-141/+3
The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IRQs are threaded (which happens when using preempt-rt) because they are registered before thread creation is possible. Use polling on those clocks instead to avoid the problem. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: make use of syscon/regmap internallyBoris Brezillon1-143/+12
Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to the child nodes of the PMC. The final benefit is to have each clock register itself instead of having to iterate over the children. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: make use of syscon to share PMC registers in several driversBoris Brezillon1-4/+8
The PMC block is providing several functionnalities: - system clk management - cpuidle - platform suspend Replace the void __iomem *regs field by a regmap (retrieved using syscon) so that we can later share the regmap across several drivers without exporting a new specific API or a global void __iomem * variable. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: at91: add generated clock driverNicolas Ferre1-0/+6
Add a new type of clocks that can be provided to a peripheral. In addition to the peripheral clock, this new clock that can use several input clocks as parents can generate divided rates. This would allow a peripheral to have finer grained clocks for generating a baud rate, clocking an asynchronous part or having more options in frequency. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [sboyd@codeaurora.org: Transition to new clk_hw provider APIs] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: at91: add PMC sama5d2 supportNicolas Ferre1-0/+15
Add support for the new sama5d2 SoC and adapt capabilities. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: kill off set_irq_flags usageRob Herring1-1/+0
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Mike Turquette <mturquette@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-02clk: at91: Constify irq_domain_opsKrzysztof Kozlowski1-1/+1
The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-05clk: at91: implement suspend/resume for the PMC irqchipBoris BREZILLON1-1/+19
The irq line used by the PMC block is shared with several peripherals including the init timer which is registering its handler with IRQF_NO_SUSPEND. Implement the appropriate suspend/resume callback for the PMC irqchip, and inform irq core that PMC irq handler can be safely called while the system is suspended by setting IRQF_COND_SUSPEND. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-16ARM: at91: move at91rm9200_idle() to clk/at91/pmc.cAlexandre Belloni1-0/+9
Move at91rm9200_idle() along with at91sam9_idle() in clk/at91/pmc.c. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-22clk: at91: add a driver for the h32mx clockAlexandre Belloni1-0/+6
Newer SoCs have two different AHB interconnect. The AHB 32 bits Matrix interconnect (h32mx) has a clock that can be setup at the half of the h64mx clock (which is mck). The h32mx clock can not exceed 90 MHz. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07clk: at91: add slow clks driverBoris BREZILLON1-0/+5
AT91 slow clk is a clk multiplexer. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260 family) the multiplexer source is hardcoded with the OSCSEL signal. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07clk: at91: rework main clk implementationBoris BREZILLON1-0/+12
AT91 main clk is a clk multiplexer and not a simple fixed rate clk as currently implemented. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260, rm9200 families) the multiplexer source is hardcoded to the external crystal oscillator. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-01-15Merge tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91 into ↵Kevin Hilman1-1/+1
next/cleanup From Nicolas Ferre: Second cleanup pull-request for 3.14: - a tiny fix for the recent AT91 CCF implementation - the switch of one platform to DT with board file removal * tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91: ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-19clk: at91: fix pmc_clk_ids data type attriubteBoris BREZILLON1-1/+1
Fix pmc_clk_ids data type attribute (__initdata -> __initconst). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-12ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration optionNicolas Ferre1-2/+0
This AT91 specific Kconfig option removed the code that dealt with programmable clocks. Each AT91 SoC embeds programmable clocks and there is little gain to remove this code in case that such a clock is not used. If this option is not selected, it causes certain drivers to fail to build. We simply remove this option instead of adding code just to build a workaround. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-02clk: at91: add PMC smd clockBoris BREZILLON1-0/+7
This patch adds at91 smd (Soft Modem) clock implementation using common clk framework. Not used by any driver right now. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC usb clockBoris BREZILLON1-0/+15
This patch adds new at91 usb clock implementation using common clk framework. This clock is used to clock usb ports (ohci, ehci and udc). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC utmi clockBoris BREZILLON1-0/+7
This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for usb clock. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC programmable clocksBoris BREZILLON1-0/+15
This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC peripheral clocksBoris BREZILLON1-0/+9
This patch adds new at91 peripheral clock implementation using common clk framework. Almost all peripherals provided by at91 SoCs need a clock to work properly. This clock is enabled/disabled using PCER/PCDR resgisters. Each peripheral is given an id (see atmel's datasheets) which is used to define and reference peripheral clocks. Some new SoCs (at91sam9x5 and sama5d3) provide a new register (PCR) where you can configure the peripheral clock as a division of the master clock. This will help reducing the peripherals power comsumption. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC system clocksBoris BREZILLON1-0/+5
This patch adds new at91 system clock implementation using common clk framework. Some peripherals need to enable a "system" clock in order to work properly. Each system clock is given an id based on the bit position in SCER/SCDR registers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC master clockBoris BREZILLON1-0/+9
This patch adds new at91 master clock implementation using common clk framework. The master clock layout describe the MCKR register layout. There are 2 master clock layouts: - at91rm9200 - at91sam9x5 Master clocks are given characteristics: - min/max clock output rate These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC pll clocksBoris BREZILLON1-0/+21
This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC main clockBoris BREZILLON1-0/+5
This patch adds new at91 main oscillator clock implementation using common clk framework. If rate is not provided during clock registration it is calculated using the slow clock (main clk parent in this case) rate and MCFR register. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC base supportBoris BREZILLON1-0/+304
This patch adds at91 PMC (Power Management Controller) base support. All at91 clocks managed by the PMC unit will use this framework. This framework provides the following fonctionalities: - define a new struct at91_pmc to hide PMC internals (lock, PMC memory mapping, irq domain, ...) - read/write helper functions (pmc_read/write) to access PMC registers - lock/unlock helper functions (pmc_lock/unlock) to lock/unlock access to pmc registers - a new irq domain and its associated irq chip to request PMC specific interrupts (useful for clk prepare callbacks) The PMC unit is declared as a dt clk provider (CLK_OF_DECLARE), and every clk using this framework will declare a table of of_at91_clk_init_cb_t and add it to the pmc_clk_ids table. When the pmc dt clock setup function is called (by of_clk_init function), it triggers the registration of every supported child clk (those matching the definitions in pmc_clk_ids). This patch copies at91_pmc_base (memory mapping) and at91sam9_idle (function) from arch/arm/mach-at91/clock.c (which is not compiled if COMMON_CLK_AT91 is enabled). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 01:49:42 +0300