| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
Commit <17de3f5fdd35> ("iommu: Retire bus ops") removes iommu ops from
the bus structure. The iommu subsystem no longer relies on bus for
operations. So iommu_domain_alloc() interface is no longer relevant.
Replace iommu_domain_alloc() with iommu_paging_domain_alloc() which takes
the physical device from which the host1x_device virtual device was
instantiated. This physical device is a common parent to all physical
devices that are part of the virtual device.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-4-baolu.lu@linux.intel.com
|
|
It's likely either output->drm_edid or output->ddc is non-NULL, but
avoid the uninitialized variable usage anyway.
Reported-by: kernel test robot <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/ZtXLyXxew7z6H2bD@stanley.mountain
Fixes: 98365ca74cbf ("drm/tegra: convert to struct drm_edid")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902161317.2437148-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8e514bad271723473d31fcc496f7143ba49c43c5)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e764b50f4ad2de95e449ccb37f49c3f37b3333fc.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The function parameter out can be used directly instead of assigning it
to a temporary u64 variable first.
Remove the local variable tmp2 and use the parameter out directly as the
divisor in do_div() to remove the following Coccinelle/coccicheck
warning reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710210034.796032-2-thorsten.blum@toblux.com
|
|
Rather than hooking up the PM domains through devm_pm_opp_attach_genpd()
and manage the device-link, let's avoid the boilerplate-code by converting
into dev_pm_domain_attach|detach_list.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723144610.564273-2-ulf.hansson@linaro.org
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612152336.v2.3.Ifb4450979b62976fd5a98847dade2e5b377d47c8@changeid
|
|
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Two misc-next in one.
drm-misc-next for v6.10-rc1:
The deal of a lifetime! You get ALL of the previous
drm-misc-next-2024-03-21-1 tag!!
But WAIT, there's MORE!
Cross-subsystem Changes:
- Assorted DT binding updates.
Core Changes:
- Clarify how optional wait_hpd_asserted is.
- Shuffle Kconfig names around.
Driver Changes:
- Assorted build fixes for panthor, imagination,
- Add AUO B120XAN01.0 panels.
- Assorted small fixes to panthor, panfrost.
drm-misc-next for v6.10:
UAPI Changes:
- Move some nouveau magic constants to uapi.
Cross-subsystem Changes:
- Move drm-misc to gitlab and freedesktop hosting.
- Add entries for panfrost.
Core Changes:
- Improve placement for TTM bo's in idle/busy handling.
- Improve drm/bridge init ordering.
- Add CONFIG_DRM_WERROR, and use W=1 for drm.
- Assorted documentation updates.
- Make more (drm and driver) headers self-contained and add header
guards.
- Grab reservation lock in pin/unpin callbacks.
- Fix reservation lock handling for vmap.
- Add edp and edid panel matching, use it to fix a nearly identical
panel.
Driver Changes:
- Add drm/panthor driver and assorted fixes.
- Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau,
panel and bridge drivers.
- Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1,
CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A,
powertip PH128800T006-ZHC01 panels.
- Fix console for omapdrm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bea310a6-6ff6-477e-9363-f9f053cfd12a@linux.intel.com
|
|
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HDMI_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-12-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_DP_AUX_BUS to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-9-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Most of our helpers have relied on being selected so far through
Kconfig, but that creates issues when we have multiple layers of helpers
with some depending on others.
Indeed, select doesn't select a dependency's dependencies, and thus
isn't super intuitive. Depends on however doesn't have that limitation,
so we can just switch all the drivers that were selecting
DRM_DISPLAY_HELPER to depend on it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix,
the DisplayPort AUX bus implementation uses DRM_DP_AUX_BUS.
Since the number of users is limited and it's a selected symbol, we can
easily rename it to make it consistent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-1-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
Sima needs a more recent release to apply a patch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Tegra DRM doesn't support display on Tegra234 and later, so make sure
not to remove any existing framebuffers in that case.
v2: - add comments explaining how this situation can come about
- clear DRIVER_MODESET and DRIVER_ATOMIC feature bits
Fixes: 6848c291a54f ("drm/aperture: Convert drivers to aperture interfaces")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223150333.1401582-1-thierry.reding@gmail.com
|
|
Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.
Found by Linux Verification Center (linuxtesting.org).
Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
|
|
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also
fixes a build problem with xe.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
virtio:
- add Venus capset defines
Cross-subsystem Changes:
Core Changes:
- fix drm_fixp2int_ceil()
- documentation fixes
- clean ups
- allow DRM_MM_DEBUG with DRM=m
- build fixes for debugfs support
- EDID cleanups
- sched: error-handling fixes
- ttm: add tests
Driver Changes:
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- tc358767: fix regmap usage
efifb:
- use copy of global screen_info state
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
simplefb:
- fix logging
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
vesafb:
- use copy of global screen_info state
virtio:
- cleanups
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111154902.GA8448@linux-uq9g
|
|
Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain
could have been left as NULL. The NULL domain is specially recognized by
host1x_client_iommu_attach() as meaning it is not the DMA domain and
should be replaced with the special shared domain.
This happened prior to the below commit because tegra-smmu was using the
NULL domain to mean IDENTITY.
Now that the domain is properly labled the test in DRM doesn't see NULL.
Check for IDENTITY as well to enable the special domains.
Fixes: c8cc2655cc6c ("iommu/tegra-smmu: Implement an IDENTITY domain")
Reported-by: diogo.ivo@tecnico.ulisboa.pt
Closes: https://lore.kernel.org/all/bbmhcoghrprmbdibnjum6lefix2eoquxrde7wyqeulm4xabmlm@b6jy32saugqh/
Tested-by: diogo.ivo@tecnico.ulisboa.pt
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-3049f92c4812+16691-host1x_def_dom_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
hdmi-codec.h does not appear to directly need drm/drm_edid.h for
anything. Remove it.
There are some files that get drm/drm_edid.h by proxy; include it where
needed.
v2-v4: Fix build (kernel test robot <lkp@intel.com>)
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: <jyri.sarha@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-3-jani.nikula@intel.com
|
|
of tegra_output_probe()
If an error occurs after a successful of_get_i2c_adapter_by_node() call, it
should be undone by a corresponding i2c_put_adapter().
Add the missing i2c_put_adapter() call.
Fixes: 9be7d864cf07 ("drm/tegra: Implement panel support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b38604178991e1f08b2cda219103be266be2d680.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
tegra_dc_rgb_probe()
If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.
Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it.
Fixes: 0c921b6d4ba0 ("drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0182895ead4e4730426616b0d9995954c960b634.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.
Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0001f61eb89048bc36241629b564195689cf54b6.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.
Fixes: 59d29c0ec93f ("drm/tegra: Allocate resources at probe time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b7c564eb71977678b20abd73ee52001a51cf327.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
of tegra_dsi_probe()
If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.
Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.
Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
|
|
The pm_runtime_enable function increases the power disable depth,
which means that we must perform a matching decrement on the error
handling path to maintain balance within the given context.
Additionally, we need to address the same issue for pm_runtime_get_sync.
We fix this by invoking pm_runtime_disable and pm_runtime_put_sync
when error returns.
Fixes: 82b81b3ec1a7 ("drm/tegra: dpaux: Implement runtime PM")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_B13DB7F6C0023C46157250A524966F326A09@qq.com
|
|
Reduce the need for rebuilds when drm_edid.h is modified by including it
only where needed.
v2: Fix build (kernel test robot <lkp@intel.com>)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213101951.3932273-1-jani.nikula@intel.com
|
|
Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
|
|
Reduce the dependencies on drm_eld.h. Some files might be able to drop
the dependency on drm_edid.h too with the direct inclusion of drm_eld.h.
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9f5963ce900d747f3279312c0cd1da599fd83f94.1698747331.git.jani.nikula@intel.com
|
|
It's confusing for a function to return NULL and ERR_PTR()-encoded error
codes on failure. Make sure we only ever return the latter since that's
what callers already expect.
Reported-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSVuVcqdGfGtQIQj@orome.fritz.box
|
|
UBSAN reports an invalid load for bool, as the iosys_map is read
later without being initialized. Zero-initialize it to avoid this.
Reported-by: Ashish Mhetre <amhetre@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901115910.701518-2-cyndis@kapsi.fi
|
|
When converting from int to string, we must allow for up to 10-chars (2147483647).
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/tegra/hub.c: In function ‘tegra_display_hub_probe’:
drivers/gpu/drm/tegra/hub.c:1106:47: warning: ‘%u’ directive output may be truncated writing between 1 and 10 bytes into a region of size 4 [-Wformat-truncation=]
drivers/gpu/drm/tegra/hub.c:1106:42: note: directive argument in the range [0, 4294967294]
drivers/gpu/drm/tegra/hub.c:1106:17: note: ‘snprintf’ output between 6 and 15 bytes into a destination of size 8
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824073710.2677348-16-lee@kernel.org
|
|
Commit 776dc3840367 ("drm/tegra: Move subdevice infrastructure to host1x")
removed the implementation but not the declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809030226.3412-1-yuehaibing@huawei.com
|
|
else is not generally useful after return
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626143331.640454-2-suijingfeng@loongson.cn
|
|
The polarities of the V- and H-sync signals are encoded as flags in the
display mode, so use the existing information to setup the signals for
the RGB interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
[tomi.valkeinen@ideasonboard.com: default to positive sync]
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-1-31725f008a50@ideasonboard.com
|
|
Use managed memory allocation for this. That allows us to not keep
track of all the files any more.
v2: keep drm_debugfs_cleanup(), but rename to drm_debugfs_unregister(),
we still need to cleanup the symlink
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-6-christian.koenig@amd.com
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
|
|
Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-16-frank.li@vivo.com
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-5-frank.li@vivo.com
|
|
When platform_get_irq fails, we should return dpaux->irq
instead of -ENXIO.
Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com
|
