summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/cfg80211.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-06Merge 'net-next/master'Kalle Valo1-0/+10
Needed by the upcoming merge of iwlwifi-next-for-kalle-2016-03-02 tag.
2016-02-24cfg80211: basic support for PBSS network typeLior David1-0/+10
PBSS (Personal Basic Service Set) is a new BSS type for DMG networks. It is similar to infrastructure BSS, having an AP-like entity called PCP (PBSS Control Point), but it has few differences. PBSS support is mandatory for 11ad devices. Add support for PBSS by introducing a new PBSS flag attribute. The PBSS flag is used in the START_AP command to request starting a PCP instead of an AP, and in the CONNECT command to request connecting to a PCP instead of an AP. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-02wil6210: wait for disconnect completionVladimir Kondratiev1-1/+12
cfg80211_ops.disconnect() should wait for disconnect flow to complete. If it does not, internal state becomes out of sync with one in cfg80211. If one does stress test connect/disconnect sequence, cfg80211 will issue next connect before disconnect completed internally. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26wil6210: use extra IEs from probe responseLior David1-39/+102
In the start_ap/change_beacon API, when we set up probe response offloading, we only use the IE list from the probe response template and not the IE list from the proberesp_ies argument. As a result, we miss important IEs and it causes problems with some scenarios such as P2P. With this change, we merge the list of IEs from the probe response template and proberesp_ies and send the merged list to the FW for offloading. It is still FW responsibility to filter out irrelevant IEs when sending probe response, based on the actual contents of the probe request. Also in case association response termplate is not provided, we will use the merged list of IEs from probe response in the association response as well. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26wil6210: fix privacy flag calculation in change_beaconLior David1-4/+4
Currently the privacy flag calculation in change_beacon checks for RSN IE inside proberesp_ies, but normally it is not found there. It works today because of code inside the function wil_fix_bcon, but wil_fix_bcon is not directly related to change_beacon, and it may be changed or removed in the future and break the calculation. To fix this issue, change the privacy flag calculation to check RSN IE inside the beacon itself. The new check is more reliable and will not be sensitive to changes in wil_fix_bcon. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: unify wmi_set_ie() error handlingVladimir Kondratiev1-21/+8
When printing error message, provide string describing IE kind. Derive it from IE type This allows removing of error messages printing in callers Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: sort IEs handlingVladimir Kondratiev1-49/+29
sort overall IE's handling prepare code (disabled for now) to add IEs for the beacon Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-30wil6210: restart AP upon change in privacy settingsVladimir Kondratiev1-84/+133
privacy settings might change while AP is running. Inside wil_cfg80211_change_beacon(), detect change in privacy settings and handle it by stopping and re-starting the AP. Firmware cannot handle on-the-fly privacy settings change and so AP restart is required. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09wil6210: Support hidden SSIDHamad Kadmany1-3/+43
Pass hidden SSID information to FW for proper operation. In order to be able to scan/connect to the hidden SSID, SSID setting is added when scan is requested from FW. SSID scanning currently supports single SSID due to FW limitation. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: support WSC for STA modeVladimir Kondratiev1-12/+14
WSC connection is secure (privacy bit set in various frames) but authentication suite, keys etc. are absent. Support this mode in the connect WMI command. Detect WSC by having 'sme->privacy' and no RSN IE. Inform firmware about WSC session by setting dot11_auth_mode to WMI_AUTH11_WSC. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: broadcast for secure linkVladimir Kondratiev1-14/+50
Introduce 2 types of GTK, Tx (for this STA) and Rx (for each peer). Now, AP has only Tx GTK, STA - only Rx one. PBSS not supported yet; for it, continue using pseudo-DMS. Handle per-vring .1x state, update it from WMI_VRING_EN_EVENTID event. This allows unification for unicast and broadcast vrings. This mechanism replaces former per-CID "data_port_open" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: fix for probe_resp IE'sVladimir Kondratiev1-10/+21
Parameters for the start_ap and change_bcon contains probe response template and probe response IE's. supplicant puts in the proberesp_ies only WPS related IE's, while firmware need all IE's, most notable is RSN that is not included in the proberesp_ies. Always use IE's provided by the bcon->probe_resp Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-28wil6210: stop_ap to leave interface closedVladimir Kondratiev1-4/+0
cfg80211_ops.stop_ap supposed to have interface carried turned off as post condition. Fulfill this requirement. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-28wil6210: trace disconnect sourceVladimir Kondratiev1-0/+5
Trace where wil6210_disconnect() is called from. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-28wil6210: debug [add|del]_key operationsVladimir Kondratiev1-0/+6
Provide info for [add|del]_key. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-01Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of ↵David S. Miller1-4/+30
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: ath9k: * add Active Interference Cancellation, a method implemented in the HW to counter WLAN RX > sensitivity degradation when BT is transmitting at the same time. This feature is supported by cards like WB222 based on AR9462. iwlwifi: * Location Aware Regulatory was added by Arik * 8000 device family work * update to the BT Coex firmware API brmcfmac: * add new BCM43455 and BCM43457 SDIO device support * add new BCM43430 SDIO device support wil6210: * take care of AP bridging * fix NAPI behavior * found approach to achieve 4*n+2 alignment of Rx frames rt2x00: * add new rt2800usb device DWA 130 rtlwifi: * add USB ID for D-Link DWA-131 * add USB ID ASUS N10 WiFi dongle mwifiex: * throughput enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20wil6210: implement broadcast/multicast dataVladimir Kondratiev1-1/+10
Use dedicated vring for multicast frames; this vring allocated for AP and PBSS (both P2P GO and client) configurations For short frames, use MCS0; for long - MCS1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Prefer ether_addr_copy() over memcpy()Vladimir Kondratiev1-3/+4
Fix checkpatch warning: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13wil6210: support AP isolationVladimir Kondratiev1-0/+16
For the AP, configuration may say not to bridge traffic between wireless clients. This is conveyed from user space (ex: hostapd has ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's cfg80211 ops method change_bss Add support for this setting. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky1-1/+1
802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-27wil6210: track privacy connection attributeVladimir Kondratiev1-12/+18
For the STA interface, track 'privacy'. Refactor safety checks to: - always print connection params - always check IE size validity - require RSN IE for secure connection Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: rename 'secure_pcp' to 'privacy'Vladimir Kondratiev1-1/+1
Make this field to track privacy attribute for all interface types Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: print ciphers in debug infoVladimir Kondratiev1-12/+25
Print (at debug level) all cipher and AKM suites Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: implement cfg80211 probe_client() opVladimir Kondratiev1-0/+91
Access point require this API to check peer alive status. Assume peer is alive when it is connected, because firmware implements keep alive checks and will disconnect peer if it is not alive. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: implement skb Tx status reportingVladimir Kondratiev1-0/+1
Implement Tx status reporting using skb_complete_wifi_ack(). Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: ignore firmware failure to gracefully stop APDedy Lansky1-5/+7
upon cfg80211_stop_ap, a graceful AP shutdown is requested from firmware followed by firmware reset. In case graceful request failed, error was returned to cfg80211. The change is to return success in this scenario, because firmware reset will anyhow shutdown the AP. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: fix timing of netif_carrier_on indicationDedy Lansky1-3/+5
netif_carrier_on indication was too late. In case Rx packet received before netif_carrier_on indication, upper layers could not send Tx packet back. The fix is to indicate netif_carrier_on earlier: for STA, indicate netif_carrier_on when association starts. for AP/PCP, indicate netif_carrier_on upon starting AP/PCP. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo1-9/+9
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-15wil6210: use bitmap API for "status"Vladimir Kondratiev1-6/+6
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg1-9/+9
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-01wil6210: propagate disconnect reasonVladimir Kondratiev1-1/+1
Propagate reason for the disconnect through the relevant call chains: - report to cfg80211 reason as reported by the firmware - provide to the firmware reason as requested by cfg80211 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-05Merge tag 'mac80211-next-for-john-2014-11-04' of ↵John W. Linville1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This relatively large batch of changes is comprised of the following: * large mac80211-hwsim changes from Ben, Jukka and a bit myself * OCB/WAVE/11p support from Rostislav on behalf of the Czech Technical University in Prague and Volkswagen Group Research * minstrel VHT work from Karl * more CSA work from Luca * WMM admission control support in mac80211 (myself) * various smaller fixes, spelling corrections, and minor API additions" Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: prevent double disconnect command issuingVladimir Kondratiev1-1/+1
Disconnect flow may be invoked either from upper layer request, or from event reported by the firmware. In case of firmware event, driver need to release resources for the station but not send another disconnect WMI command. In case of upper layer request, WMI_DISCONNECT_STA_CMDID command need to be issued for the firmware to perform disconnect on the MAC layer. Eventually, event is expected to confirm MAC disconnect, but it is better to not wait for firmware event and release station resources immediately. FW may fail to report disconnect for various reasons, so one could not rely on event always reported. Introduce parameter to distinguish 2 cases above to prevent double WMI command issuing. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-20cfg80211: Convert del_station() callback to use a param structJouni Malinen1-2/+3
This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-02wil6210: manual FW error recovery modeVladimir Kondratiev1-0/+4
Introduce manual FW recovery mode. It is activated if module parameter @no_fw_recovery set to true. May be changed at runtime. Recovery information provided by new "recovery" debugfs file. It prints: mode = [auto|manual] state = [idle|pending|running] In manual mode, after FW error, recovery won't start automatically. Instead, after notification to user space, recovery waits in "pending" state, as indicated by the "recovery" debugfs file. User space tools may perform data collection and allow to continue recovery by writing "run" to the "recovery" debugfs file. Alternatively, recovery pending may be canceled by stopping network interface i.e. 'ifconfig wlan0 down' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: fix for oops while stopping interfaceVladimir Kondratiev1-11/+8
When interface stopped while running intensive Rx traffic, the following oops observed: [89846.734683] Call trace: [89846.737117] [<ffffffc00083aa64>] dev_gro_receive+0xac/0x358 [89846.742674] [<ffffffc00083ae94>] napi_gro_receive+0x24/0xa4 [89846.748251] [<ffffffbffc1c2f88>] $x+0xec/0x1f8 [wil6210] wil_netif_rx_any [89846.753547] [<ffffffbffc1c4830>] $x+0x34/0x54 [wil6210] wil_release_reorder_frame [89846.758755] [<ffffffbffc1c48ac>] wil_release_reorder_frames+0x5c/0x78 [wil6210] [89846.766044] [<ffffffbffc1c4bf8>] wil_tid_ampdu_rx_free+0x20/0x48 [wil6210] [89846.772901] [<ffffffbffc1bedc8>] $x+0x190/0x1e8 [wil6210] [89846.778285] [<ffffffbffc1c0ed4>] wmi_event_worker+0x230/0x2f8 [wil6210] [89846.784865] [<ffffffc0000b0bc8>] process_one_work+0x278/0x3fc [89846.790591] [<ffffffc0000b1218>] worker_thread+0x200/0x330 [89846.796060] [<ffffffc0000b6664>] kthread+0xac/0xb8 [89846.800836] Code: b940c661 f9406a62 8b010041 f9400026 (f8636882) [89846.807008] ---[ end trace d6fdc17cd27d18f6 ]--- Reason is the following: when removing Rx vring (wil_netdev_ops.ndo_stop -> wil_stop -> wil_down -> __wil_down -> wil_rx_fini), Rx interrupt occurs. It trigger Rx NAPI, calling wil_rx_handle() that reaps (already cleaned) buffer, causing skb referring to garbage memory being set into reorder buffer. Then, network stack trying to access this buffer and fails. Prevent Rx NAPI from being scheduled if device going to stop. Bit wil_status_napi_en reflects NAPI enablement state, check it when triggering Rx NAPI. Testing shows that check for wil_status_napi_en sometimes gets negative, and new error message get printed - in this case kernel oops would be observed. Original oops is no more reproducible. This change requires also changes in the AP flows. Properly enable/disable NAPI for the AP. Make sure Rx VRING is disabled when resetting target. For this, promote __wil_up() and __wil_down() to the module scope, and use it in the relevant flows. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: specify max. IE lengthVladimir Kondratiev1-0/+15
Expose firmware limit for the max_scan_ie_len; also do actually set IE's for the probe request max_scan_ie_len used to be 0, this blocks scan requests with non-zero IE's Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: add change_beacon() driver callbackVladimir Kondratiev1-0/+40
This allows updating IEs (e.g. from hostapd) when AP is already started Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: send connect request IEs to FW also for non-secure connectionVladimir Kondratiev1-11/+11
Driver is sending connect request IEs to FW only for secure connection and ignores them for non-secure connection. This is fixed by always sending the IEs to FW upon connect request Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: add more debug printoutsVladimir Kondratiev1-2/+6
added misc printouts in some init/uninit functions for better traceability Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: coding style fixesVladimir Kondratiev1-2/+2
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: print more information when connectingVladimir Kondratiev1-0/+18
when connecting, print some info about BSS Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: fix false "scan timeout"Vladimir Kondratiev1-1/+3
When sending scan request, if hardware is not ready, scan timer was started and scan timeout mis-reported. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-26wil6210: update copyright year 2014Vladimir Kondratiev1-1/+1
Fix Copyright headers in all files changed in 2014, to mention 2014 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: add 'freq' and 'link' debugfs entriesVladimir Kondratiev1-2/+2
Expose operational frequency and link info Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: debug print when scan request state changesVladimir Kondratiev1-0/+1
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: print debug info when starting APVladimir Kondratiev1-1/+42
In the wil_cfg80211_start_ap(), debug print selected data: - beacon (before and after fix-up) - crypto parameters - mark start/stop AP invocation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: indicate mgmt_tx statusVladimir Kondratiev1-4/+9
Inform cfg80211 about Tx result Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Tx mgmt frame from debugfsVladimir Kondratiev1-4/+3
Provide 2 files on the debugfs: - "rxon": write channel (1..4) to open Rx on it, 0 to rxoff - "tx_mgmt": write binary frame, starting from MAC header one need to care about turning receiver on/off before/after tx_mgmt Correct sequence is: echo $channel > rxon cat mfmt_frame > tx_mgmt echo 0 > rxon Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 06:03:21 +0300