summaryrefslogtreecommitdiff
path: root/include/soc/tegra/fuse.h
AgeCommit message (Collapse)AuthorFilesLines
2024-02-01soc/tegra: fuse: Add support for Tegra241Kartik1-0/+1
Add support for Tegra241 which use ACPI boot. Signed-off-by: Kartik <kkartik@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-05-16soc/tegra: fuse: Add support for Tegra264Stefan Kristiansson1-1/+2
Add support for Tegra264 to the fuse handling code. Signed-off-by: Stefan Kristiansson <stefank@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-11soc/tegra: fuse: Use platform info with SoC revisionKartik1-0/+15
Tegra pre-silicon platforms do not have chip revisions. This makes the revision SoC attribute meaningless on these platforms. Instead, populate the revision SoC attribute with a combination of the platform name and the chip revision for silicon platforms, and simply with the platform name on pre-silicon platforms. Signed-off-by: Kartik <kkartik@nvidia.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-09-15soc/tegra: Set ERD bit to mask inband errorsSumit Gupta1-0/+6
Add a function to set the ERD (Error Response Disable) bit in the MISCREG_CCROC_ERR_CONFIG register from the Control Backbone (CBB) error handler driver. ERD bit allows masking of SError due to inband errors which are caused by illegal register accesses through CBB. When the bit is set, interrupt is used for reporting errors and magic code '0xdead2003' is returned. This change is only required for Tegra194 SoC as the config is moved to CBB register space for future SoC's. Also, remove unmapping the apbmisc_base as it's required to get the base address for accessing the misc register. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-04soc/tegra: fuse: Add stubs needed for compile testingDmitry Osipenko1-5/+26
Add stubs needed for compile-testing of tegra-cpuidle driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01soc/tegra: fuse: Add stubs needed for compile-testingDmitry Osipenko1-3/+17
Add missing stubs that will allow Tegra memory driver to be compile-tested by kernel build bots. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-06soc/tegra: fuse: Add stub for tegra_sku_infoDmitry Osipenko1-0/+4
Drivers that use tegra_sku_info and have COMPILE_TEST are failing to be build due to the missing stub for tegra_sku_info. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201104164923.21238-4-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-18soc/tegra: fuse: Add Tegra234 supportThierry Reding1-0/+1
Add support for FUSE block found on the Tegra234 SoC, which is largely similar to the IP found on previous generations. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18soc/tegra: fuse: Implement tegra_is_silicon()Thierry Reding1-0/+1
This function can be used by drivers to determine whether code is running on silicon or on a simulation platform. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18soc/tegra: fuse: Extract tegra_get_platform()Thierry Reding1-0/+1
This function extracts the PRE_SI_PLATFORM field from the HIDREV register and can be used to determine which platform the kernel runs on (silicon, simulation, ...). Note that while only Tegra194 and later define this field, it should be safe to call this on prior generations as well since this field should read as 0, indicating silicon. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-17soc/tegra: fuse: Add Tegra186 and Tegra194 SoC IDsSandipan Patra1-0/+2
SoC IDs for these generations had never been defined. Do so now. Signed-off-by: Sandipan Patra <spatra@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13soc/tegra: fuse: Remove duplicated function declarationBo Yan1-1/+0
The function tegra_read_chipid() is declared twice in fuse.h. Remove the redundant declaration. Signed-off-by: Bo Yan <byan@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17soc/tegra: Register SoC deviceThierry Reding1-0/+2
Move this code from arch/arm/mach-tegra and make it common among 32-bit and 64-bit Tegra SoCs. This is slightly complicated by the fact that on 32-bit Tegra, the SoC device is used as the parent for all devices that are instantiated from device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29phy: tegra: Add Tegra210 supportThierry Reding1-0/+1
Add support for the XUSB pad controller found on Tegra210 SoCs. The hardware is roughly the same, but some of the registers have been moved around and the number and type of supported pads has changed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16soc/tegra: fuse: Rename core_* to soc_*Thierry Reding1-1/+1
There's a mixture of core_* and soc_* prefixes for variables storing information related to the VDD_CORE rail. Choose one (soc_*) and use it more consistently. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16soc/tegra: fuse: Add Tegra210 supportThierry Reding1-1/+3
Add Tegra210 support to the fuses driver and add Tegra210-specific speedo definitions. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04soc/tegra: fuse: Add RAM code reader helperMikko Perttunen1-0/+1
Needed for the EMC and MC drivers to know what timings from the DT to use. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: Add Tegra132 supportThierry Reding1-0/+1
Add the chip ID for the NVIDIA Tegra132 SoC family. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17soc/tegra: fuse: Set up in early initcallThierry Reding1-1/+0
Rather than rely on explicit initialization order called from SoC setup code, use a plain initcall and rely on initcall ordering to take care of dependencies. This driver exposes some functionality (querying the chip ID) needed at very early stages of the boot process. An early initcall is good enough provided that some of the dependencies are deferred to later stages. To make sure any abuses are easily caught, output a warning message if the chip ID is queried while it can't be read yet. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17soc/tegra: fuse: move APB DMA into Tegra20 fuse driverPeter De Schrijver1-14/+0
The Tegra20 fuse driver is the only user of tegra_apb_readl_using_dma(). Therefore we can simply the code by incorporating the APB DMA handling into the driver directly. tegra_apb_writel_using_dma() is dropped because there are no users. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17soc/tegra: Add efuse driver for TegraPeter De Schrijver1-1/+19
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124. This replaces functionality previously provided in arch/arm/mach-tegra, which is removed in this patch. While at it, move the only user of the global tegra_revision variable over to tegra_sku_info.revision and export tegra_fuse_readl() to allow drivers to read calibration fuses. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: move fuse exports to soc/tegra/fuse.hPeter De Schrijver1-0/+16
All fuse related functionality will move to a driver in the following patches. To prepare for this, export all the required functionality in a global header file and move all users of fuse.h to soc/tegra/fuse.h. While we're at it, remove tegra_bct_strapping, as its only user was removed in Commit a7cbe92cef27 ("ARM: tegra: remove tegra EMC scaling driver"). Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: export apb dma readl/writelPeter De Schrijver1-0/+14
Export APB DMA readl and writel. These are needed because we can't access the fuses directly on Tegra20 without potentially causing a system hang. Also have the APB DMA readl and writel return an error in case of a read failure instead of just returning zero or ignore write failures. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: Use a function to get the chip IDThierry Reding1-0/+10
Instead of using a simple variable access to get at the Tegra chip ID, use a function so that we can run additional code. This can be used to determine where the chip ID is being accessed without being available. That in turn will be handy for resolving boot sequence dependencies in order to convert more code to regular initcalls rather than a sequence fixed by Tegra SoC setup code. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17ARM: tegra: Move includes to include/soc/tegraThierry Reding1-0/+22
In order to not clutter the include/linux directory with SoC specific headers, move the Tegra-specific headers out into a separate directory. Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 18:21:05 +0300