summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2024-07-26wifi: cfg80211: correct S1G beacon length calculationJohannes Berg1-3/+8
The minimum header length calculation (equivalent to the start of the elements) for the S1G long beacon erroneously required only up to the start of u.s1g_beacon rather than the start of u.s1g_beacon.variable. Fix that, and also shuffle the branches around a bit to not assign useless values that are overwritten later. Reported-by: syzbot+0f3afa93b91202f21939@syzkaller.appspotmail.com Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Link: https://patch.msgid.link/20240724132912.9662972db7c1.I8779675b5bbda4994cc66f876b6b87a2361c3c0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_doneVeerendranath Jakkam1-0/+1
Individual MLO links connection status is not copied to EVENT_CONNECT_RESULT data while processing the connect response information in cfg80211_connect_done(). Due to this failed links are wrongly indicated with success status in EVENT_CONNECT_RESULT. To fix this, copy the individual MLO links status to the EVENT_CONNECT_RESULT data. Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com [commit message editorial changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: cfg80211: add helper for checking if a chandef is valid on a radioFelix Fietkau1-0/+35
Check if the full channel width is in the radio's frequency range. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/7c8ea146feb6f37cee62e5ba6be5370403695797.1720514221.git-series.nbd@nbd.name [add missing Return: documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: cfg80211: extend interface combination check for multi-radioFelix Fietkau2-7/+38
Add a field in struct iface_combination_params to check per-radio interface combinations instead of per-wiphy ones. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/32b28da89c2d759b0324deeefe2be4cee91de18e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-09wifi: cfg80211: add support for advertising multiple radios belonging to a wiphyFelix Fietkau1-11/+102
The prerequisite for MLO support in cfg80211/mac80211 is that all the links participating in MLO must be from the same wiphy/ieee80211_hw. To meet this expectation, some drivers may need to group multiple discrete hardware each acting as a link in MLO under single wiphy. With this change, supported frequencies and interface combinations of each individual radio are reported to user space. This allows user space to figure out the limitations of what combination of channels can be used concurrently. Even for non-MLO devices, this improves support for devices capable of running on multiple channels at the same time. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-08wifi: nl80211: split helper function from nl80211_put_iface_combinationsFelix Fietkau1-52/+59
Create a helper function that puts the data from struct ieee80211_iface_combination to a nl80211 message. This will be used for adding per-radio interface combination data. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/22a0eee19dbcf98627239328bc66decd3395122c.1719919832.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: nl80211: don't give key data to userspaceJohannes Berg1-8/+2
When a key is requested by userspace, there's really no need to include the key data, the sequence counter is really what userspace needs in this case. The fact that it's included is just a historic quirk. Remove the key data. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski11-138/+256
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+5
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM valuesEric Dumazet1-1/+5
syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/neighbour.c:1538 [inline] softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_resolve_output+0x268/0x658 net/core/neighbour.c:1553 softirqs last disabled at (125896): [<ffff80008904166c>] local_bh_disable+0x10/0x34 include/linux/bottom_half.h:19 CPU: 1 PID: 24 Comm: kworker/1:0 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: mld mld_ifc_work pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __list_del include/linux/list.h:195 [inline] pc : __list_del_entry include/linux/list.h:218 [inline] pc : list_move_tail include/linux/list.h:310 [inline] pc : fq_tin_dequeue include/net/fq_impl.h:112 [inline] pc : ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 lr : __list_del_entry include/linux/list.h:218 [inline] lr : list_move_tail include/linux/list.h:310 [inline] lr : fq_tin_dequeue include/net/fq_impl.h:112 [inline] lr : ieee80211_tx_dequeue+0x67c/0x3b4c net/mac80211/tx.c:3854 sp : ffff800093d36700 x29: ffff800093d36a60 x28: ffff800093d36960 x27: dfff800000000000 x26: ffff0000d800ad50 x25: ffff0000d800abe0 x24: ffff0000d800abf0 x23: ffff0000e0032468 x22: ffff0000e00324d4 x21: ffff0000d800abf0 x20: ffff0000d800abf8 x19: ffff0000d800abf0 x18: ffff800093d363c0 x17: 000000000000d476 x16: ffff8000805519dc x15: ffff7000127a6cc8 x14: 1ffff000127a6cc8 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff7000127a6cc8 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff80009287aa08 x4 : 0000000000000008 x3 : ffff80008034c7fc x2 : ffff0000e0032468 x1 : 00000000da0e46b8 x0 : ffff0000e0032470 Call trace: __list_del include/linux/list.h:195 [inline] __list_del_entry include/linux/list.h:218 [inline] list_move_tail include/linux/list.h:310 [inline] fq_tin_dequeue include/net/fq_impl.h:112 [inline] ieee80211_tx_dequeue+0x6b8/0x3b4c net/mac80211/tx.c:3854 wake_tx_push_queue net/mac80211/util.c:294 [inline] ieee80211_handle_wake_tx_queue+0x118/0x274 net/mac80211/util.c:315 drv_wake_tx_queue net/mac80211/driver-ops.h:1350 [inline] schedule_and_wake_txq net/mac80211/driver-ops.h:1357 [inline] ieee80211_queue_skb+0x18e8/0x2244 net/mac80211/tx.c:1664 ieee80211_tx+0x260/0x400 net/mac80211/tx.c:1966 ieee80211_xmit+0x278/0x354 net/mac80211/tx.c:2062 __ieee80211_subif_start_xmit+0xab8/0x122c net/mac80211/tx.c:4338 ieee80211_subif_start_xmit+0xe0/0x438 net/mac80211/tx.c:4532 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x27c/0x938 net/core/dev.c:3547 __dev_queue_xmit+0x1678/0x33fc net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] neigh_resolve_output+0x558/0x658 net/core/neighbour.c:1563 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x104c/0x1ee8 net/ipv6/ip6_output.c:137 ip6_finish_output+0x428/0x7a0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:450 [inline] NF_HOOK+0x160/0x4f0 include/linux/netfilter.h:314 mld_sendpack+0x7b4/0x10f4 net/ipv6/mcast.c:1818 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x840/0xd0c net/ipv6/mcast.c:2650 process_one_work+0x7b8/0x15d4 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:3429 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240615160800.250667-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: cfg80211: Always call tracingIlan Peer1-35/+21
Call the tracing function even if the cfg80211 callbacks are not set. This would allow better understanding of user space actions. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20240614093541.018cb816e176.I28f68740a6b42144346f5c175c7874b0a669a364@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+9
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-12wifi: cfg80211: honor WIPHY_FLAG_SPLIT_SCAN_6GHZ in cfg80211_conn_scanEmmanuel Grumbach1-2/+2
If a user uses iw to connect to a network and we don't have any information about the existing networks, cfg80211 will trigger a scan internally even if the user didn't ask for a scan. This scan is implemented by cfg80211_conn_scan(). This function called rdev_scan() directly without honoring the WIPHY_FLAG_SPLIT_SCAN_6GHZ flag. Use cfg80211_scan instead, this will split the scan if the low level driver asked to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605135233.33f03661476a.I7b5be20a55aafe012cd9ddb3b4ba2d46b256ace4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: nl80211: remove the FTMs per burst limit for NDP rangingAvraham Stern2-3/+10
In NDP ranging, the number of NDP exchanges is not negotiated and thus is not limited by the protocol. Remove the limit on FTMs per burst for trigger based and non trigger based ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: reject non-conformant 6 GHz center frequenciesBenjamin Berg2-11/+49
On 6 GHz (and also 5 GHz to some degree), only a specific set of center frequencies should be used depending on the channel bandwidth. Verify this is the case on 6 GHz. For 5 GHz, we are more accepting as there are APs that got it wrong historically. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240602102200.876b10a2beda.I0d3d0daea4014e99654437ff6691378dbe452652@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: add regulatory flag to allow VLP AP operationJohannes Berg4-19/+62
Add a regulatory flag to allow VLP AP operation even on channels otherwise marked NO_IR, which may be possible in some regulatory domains/countries. Note that this requires checking also when the beacon is changed, since that may change the regulatory power type. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: refactor regulatory beaconing checkingJohannes Berg1-18/+12
There are two functions exported now, with different settings, refactor to just export a single function that take a struct with different settings. This will make it easier to add more parameters. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: refactor 6 GHz AP power type parsingJohannes Berg2-27/+46
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz power type from a given set of elements, which is now only inside cfg80211_6ghz_power_type_valid(). Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: mac80211: refactor channel checksJohannes Berg3-10/+14
To later introduce an override for VLP APs being allowed despite NO-IR flags, which is somewhat similar in construction to being allowed to monitor on disabled channels, refactor the code that checks channel flags to have not a 'monitor' argument but a set of 'permitting' flags that permit the operation without checking for 'prohibited' flags. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: nl80211: expose can-monitor channel propertyJohannes Berg1-0/+3
It may be possible to monitor on disabled channels per the can-monitor flag, but evidently I forgot to expose that out to userspace. Fix that. Fixes: a110a3b79177 ("wifi: cfg80211: optionally support monitor on disabled channels") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.9a2c19a51e53.I50fa1b1a18b70f63a5095131ac23dc2e71f3d426@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he()Baochen Qiang1-1/+3
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: fix typo in cfg80211_calculate_bitrate_he()Baochen Qiang1-2/+2
rates_996 is mistakenly written as rates_969, fix it. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://msgid.link/20240606020653.33205-2-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: make hash table duplicates more survivableJohannes Berg1-12/+34
Jiazi Li reported that they occasionally see hash table duplicates as evidenced by the WARN_ON() in rb_insert_bss() in this code. It isn't clear how that happens, nor have I been able to reproduce it, but if it does happen, the kernel crashes later, when it tries to unhash the entry that's now not hashed. Try to make this situation more survivable by removing the BSS from the list(s) as well, that way it's fully leaked here (as had been the intent in the hash insert error path), and no longer reachable through the list(s) so it shouldn't be unhashed again later. Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: wext: add extra SIOCSIWSCAN data checkDmitry Antipov1-2/+6
In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise. Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: wext: set ssids=NULL for passive scansJohannes Berg1-1/+3
In nl80211, we always set the ssids of a scan request to NULL when n_ssids==0 (passive scan). Drivers have relied on this behaviour in the past, so we fixed it in 6 GHz scan requests as well, and added a warning so we'd have assurance the API would always be called that way. syzbot found that wext doesn't ensure that, so we reach the check and trigger the warning. Fix the wext code to set the ssids pointer to NULL when there are none. Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-11Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski6-111/+225
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: cfg80211: fix 6 GHz scan request buildingJohannes Berg2-17/+36
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: pmsr: use correct nla_get_uX functionsLin Ma1-4/+4
The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: Lock wiphy in cfg80211_get_stationRemi Pommarel1-1/+6
Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Antonio Quartulli <a@unstable.cc> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: fully move wiphy work to unbound workqueueJohannes Berg2-3/+3
Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: cfg80211: validate HE operation element parsingJohannes Berg1-1/+2
Validate that the HE operation element has the correct length before parsing it. Cc: stable@vger.kernel.org Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: nl80211: clean up coalescing rule handlingJohannes Berg3-34/+20
There's no need to allocate a tiny struct and then an array again, just allocate the two together and use __counted_by(). Also unify the freeing. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240523120213.48a40cfb96f9.Ia02bf8f8fefbf533c64c5fa26175848d4a3a7899@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: cfg80211: restrict operation during radar detectionJohannes Berg3-8/+23
Just like it's not currently possible to start radar detection while already operating, it shouldn't be possible to start operating while radar detection is running. Fix that. Also, improve the check whether operating (carrier might not be up if e.g. attempting to join IBSS). Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506211158.ae8dca3d0d6c.I7c70a66a5fbdbc63a78fee8a34f31d1995491bc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: cfg80211: add tracing for wiphy workJohannes Berg2-0/+86
Add trace events to trace when wiphy works are queued (or delayed ones scheduled), and other APIs are called. Also add an event when the worker starts, before acquiring the mutex, to be able to see potential delays due to locking. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: cfg80211: sort trace events againJohannes Berg1-69/+69
They were meant to be split into ops and APIs, but some ops were added in the wrong place. Fix that. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506210002.0b3a86a5d8d7.I5591c03223bdb95597e181de63a2eded424de34c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: nl80211: disallow setting special AP channel widthsJohannes Berg1-0/+27
Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. Reported-by: syzbot+bc0f5b92cc7091f45fb6@syzkaller.appspotmail.com Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b0924f6c5fbb2dc45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)1-1/+1
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-09kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada1-1/+1
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-06Merge wireless into wireless-nextJohannes Berg1-7/+7
Given how late we are in the cycle, merge the two fixes from wireless into wireless-next as they don't see that urgent. This way, the wireless tree won't need rebasing later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: cfg80211: handle color change per linkAditya Kumar Singh2-4/+12
Currently, during color change, no link id information is passed down. In order to support color change during Multi Link Operation, it is required to pass link id as well. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com [squash, actually only pass 0 from mac80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: cfg80211: Clear mlo_links info when STA disconnectsXin Deng1-0/+1
wdev->valid_links is not cleared when upper layer disconnect from a wdev->AP MLD. It has been observed that this would prevent offchannel operations like remain-on-channel which would be needed for user space operations with Public Action frame. Clear the wdev->valid_links when STA disconnects. Signed-off-by: Xin Deng <quic_deng@quicinc.com> Link: https://msgid.link/20240426092501.8592-1-quic_deng@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: nl80211: Avoid address calculations via out of bounds array indexingKees Cook1-7/+7
Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://msgid.link/20240424220057.work.819-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+4
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19wifi: cfg80211: add return docs for regulatory functionsJohannes Berg1-1/+4
Add return value documentation for regulatory functions that are missing it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: cfg80211: make some regulatory functions voidJohannes Berg3-16/+13
The return value of regulatory_hint_indoor() is always 0 for success, and the return value of regulatory_hint_found_beacon() is always ignored. Make them both have void return. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: nl80211: don't free NULL coalescing ruleJohannes Berg1-0/+2
If the parsing fails, we can dereference a NULL pointer here. Cc: stable@vger.kernel.org Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-08wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt ↵Igor Artemiev1-2/+2
class The declarations of the tx_rx_evt class and the rdev_set_antenna event use the wrong order of arguments in the TP_ARGS macro. Fix the order of arguments in the TP_ARGS macro. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru> Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-04Merge tag 'wireless-next-2024-04-03' of ↵Jakub Kicinski1-10/+44
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-25wifi: cfg80211: ignore non-TX BSSs in per-STA profileBenjamin Berg1-9/+38
If a non-TX BSS is included in a per-STA profile, then we cannot set transmitted_bss for it. Even worse, if we do things properly we should be configuring both bssid_index and max_bssid_indicator correctly. We do not actually have both pieces of information (and, some APs currently do not include either). So, ignore any per-STA profile where the RNR says that the BSS is not transmitted. Also fix transmitted_bss to never be set for per-STA profiles. This fixes issues where mac80211 was setting the reference BSSID to an incorrect value. Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240318184907.6a0babed655a.Iad447fea417c63f683da793556b97c31d07a4aab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-24 06:39:32 +0300