summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
blob: 61c872f0f7ca882c6e83b22b07f42948b1987ed6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Ilitek ILI9322 TFT LCD drm_panel driver.
 *
 * This panel can be configured to support:
 * - 8-bit serial RGB interface
 * - 24-bit parallel RGB interface
 * - 8-bit ITU-R BT.601 interface
 * - 8-bit ITU-R BT.656 interface
 * - Up to 320RGBx240 dots resolution TFT LCD displays
 * - Scaling, brightness and contrast
 *
 * The scaling means that the display accepts a 640x480 or 720x480
 * input and rescales it to fit to the 320x240 display. So what we
 * present to the system is something else than what comes out on the
 * actual display.
 *
 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
 * Derived from drivers/drm/gpu/panel/panel-samsung-ld9040.c
 */

#include <linux/bitops.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>

#include <video/mipi_display.h>
#include <video/of_videomode.h>
#include <video/videomode.h>

#include <drm/drm_modes.h>
#include <drm/drm_panel.h>

#define ILI9322_CHIP_ID			0x00
#define ILI9322_CHIP_ID_MAGIC		0x96

/*
 * Voltage on the communication interface, from 0.7 (0x00)
 * to 1.32 (0x1f) times the VREG1OUT voltage in 2% increments.
 * 1.00 (0x0f) is the default.
 */
#define ILI9322_VCOM_AMP		0x01

/*
 * High voltage on the communication signals, from 0.37 (0x00) to
 * 1.0 (0x3f) times the VREGOUT1 voltage in 1% increments.
 * 0.83 (0x2e) is the default.
 */
#define ILI9322_VCOM_HIGH		0x02

/*
 * VREG1 voltage regulator from 3.6V (0x00) to 6.0V (0x18) in 0.1V
 * increments. 5.4V (0x12) is the default. This is the reference
 * voltage for the VCOM levels and the greyscale level.
 */
#define ILI9322_VREG1_VOLTAGE		0x03

/* Describes the incoming signal */
#define ILI9322_ENTRY			0x06
/* 0 = right-to-left, 1 = left-to-right (default), horizontal flip */
#define ILI9322_ENTRY_HDIR		BIT(0)
/* 0 = down-to-up, 1 = up-to-down (default), vertical flip  */
#define ILI9322_ENTRY_VDIR		BIT(1)
/* NTSC, PAL or autodetect */
#define ILI9322_ENTRY_NTSC		(0 << 2)
#define ILI9322_ENTRY_PAL		(1 << 2)
#define ILI9322_ENTRY_AUTODETECT	(3 << 2)
/* Input format */
#define ILI9322_ENTRY_SERIAL_RGB_THROUGH (0 << 4)
#define ILI9322_ENTRY_SERIAL_RGB_ALIGNED (1 << 4)
#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_320X240 (2 << 4)
#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_360X240 (3 << 4)
#define ILI9322_ENTRY_DISABLE_1		(4 << 4)
#define ILI9322_ENTRY_PARALLEL_RGB_THROUGH (5 << 4)
#define ILI9322_ENTRY_PARALLEL_RGB_ALIGNED (6 << 4)
#define ILI9322_ENTRY_YUV_640Y_320CBCR_25_54_MHZ (7 << 4)
#define ILI9322_ENTRY_YUV_720Y_360CBCR_27_MHZ (8 << 4)
#define ILI9322_ENTRY_DISABLE_2		(9 << 4)
#define ILI9322_ENTRY_ITU_R_BT_656_720X360 (10 << 4)
#define ILI9322_ENTRY_ITU_R_BT_656_640X320 (11 << 4)

/* Power control */
#define ILI9322_POW_CTRL		0x07
#define ILI9322_POW_CTRL_STB		BIT(0) /* 0 = standby, 1 = normal */
#define ILI9322_POW_CTRL_VGL		BIT(1) /* 0 = off, 1 = on  */
#define ILI9322_POW_CTRL_VGH		BIT(2) /* 0 = off, 1 = on  */
#define ILI9322_POW_CTRL_DDVDH		BIT(3) /* 0 = off, 1 = on  */
#define ILI9322_POW_CTRL_VCOM		BIT(4) /* 0 = off, 1 = on  */
#define ILI9322_POW_CTRL_VCL		BIT(5) /* 0 = off, 1 = on  */
#define ILI9322_POW_CTRL_AUTO		BIT(6) /* 0 = interactive, 1 = auto */
#define ILI9322_POW_CTRL_STANDBY	(ILI9322_POW_CTRL_VGL | \
					 ILI9322_POW_CTRL_VGH | \
					 ILI9322_POW_CTRL_DDVDH | \
					 ILI9322_POW_CTRL_VCL | \
					 ILI9322_POW_CTRL_AUTO | \
					 BIT(7))
#define ILI9322_POW_CTRL_DEFAULT	(ILI9322_POW_CTRL_STANDBY | \
					 ILI9322_POW_CTRL_STB)

/* Vertical back porch bits 0..5 */
#define ILI9322_VBP			0x08

/* Horizontal back porch, 8 bits */
#define ILI9322_HBP			0x09

/*
 * Polarity settings:
 * 1 = positive polarity
 * 0 = negative polarity
 */
#define ILI9322_POL			0x0a
#define ILI9322_POL_DCLK		BIT(0) /* 1 default */
#define ILI9322_POL_HSYNC		BIT(1) /* 0 default */
#define ILI9322_POL_VSYNC		BIT(2) /* 0 default */
#define ILI9322_POL_DE			BIT(3) /* 1 default */
/*
 * 0 means YCBCR are ordered Cb0,Y0,Cr0,Y1,Cb2,Y2,Cr2,Y3 (default)
 *   in RGB mode this means RGB comes in RGBRGB
 * 1 means YCBCR are ordered Cr0,Y0,Cb0,Y1,Cr2,Y2,Cb2,Y3
 *   in RGB mode this means RGB comes in BGRBGR
 */
#define ILI9322_POL_YCBCR_MODE		BIT(4)
/* Formula A for YCbCR->RGB = 0, Formula B = 1 */
#define ILI9322_POL_FORMULA		BIT(5)
/* Reverse polarity: 0 = 0..255, 1 = 255..0 */
#define ILI9322_POL_REV			BIT(6)

#define ILI9322_IF_CTRL			0x0b
#define ILI9322_IF_CTRL_HSYNC_VSYNC	0x00
#define ILI9322_IF_CTRL_HSYNC_VSYNC_DE	BIT(2)
#define ILI9322_IF_CTRL_DE_ONLY		BIT(3)
#define ILI9322_IF_CTRL_SYNC_DISABLED	(BIT(2) | BIT(3))
#define ILI9322_IF_CTRL_LINE_INVERSION	BIT(0) /* Not set means frame inv */

#define ILI9322_GLOBAL_RESET		0x04
#define ILI9322_GLOBAL_RESET_ASSERT	0x00 /* bit 0 = 0 -> reset */

/*
 * 4+4 bits of negative and positive gamma correction
 * Upper nybble, bits 4-7 are negative gamma
 * Lower nybble, bits 0-3 are positive gamma
 */
#define ILI9322_GAMMA_1			0x10
#define ILI9322_GAMMA_2			0x11
#define ILI9322_GAMMA_3			0x12
#define ILI9322_GAMMA_4			0x13
#define ILI9322_GAMMA_5			0x14
#define ILI9322_GAMMA_6			0x15
#define ILI9322_GAMMA_7			0x16
#define ILI9322_GAMMA_8			0x17

/*
 * enum ili9322_input - the format of the incoming signal to the panel
 *
 * The panel can be connected to various input streams and four of them can
 * be selected by electronic straps on the display. However it is possible
 * to select another mode or override the electronic default with this
 * setting.
 */
enum ili9322_input {
	ILI9322_INPUT_SRGB_THROUGH = 0x0,
	ILI9322_INPUT_SRGB_ALIGNED = 0x1,
	ILI9322_INPUT_SRGB_DUMMY_320X240 = 0x2,
	ILI9322_INPUT_SRGB_DUMMY_360X240 = 0x3,
	ILI9322_INPUT_DISABLED_1 = 0x4,
	ILI9322_INPUT_PRGB_THROUGH = 0x5,
	ILI9322_INPUT_PRGB_ALIGNED = 0x6,
	ILI9322_INPUT_YUV_640X320_YCBCR = 0x7,
	ILI9322_INPUT_YUV_720X360_YCBCR = 0x8,
	ILI9322_INPUT_DISABLED_2 = 0x9,
	ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR = 0xa,
	ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR = 0xb,
	ILI9322_INPUT_UNKNOWN = 0xc,
};

static const char * const ili9322_inputs[] = {
	"8 bit serial RGB through",
	"8 bit serial RGB aligned",
	"8 bit serial RGB dummy 320x240",
	"8 bit serial RGB dummy 360x240",
	"disabled 1",
	"24 bit parallel RGB through",
	"24 bit parallel RGB aligned",
	"24 bit YUV 640Y 320CbCr",
	"24 bit YUV 720Y 360CbCr",
	"disabled 2",
	"8 bit ITU-R BT.656 720Y 360CbCr",
	"8 bit ITU-R BT.656 640Y 320CbCr",
};

/**
 * struct ili9322_config - the system specific ILI9322 configuration
 * @width_mm: physical panel width [mm]
 * @height_mm: physical panel height [mm]
 * @flip_horizontal: flip the image horizontally (right-to-left scan)
 * (only in RGB and YUV modes)
 * @flip_vertical: flip the image vertically (down-to-up scan)
 * (only in RGB and YUV modes)
 * @input: the input/entry type used in this system, if this is set to
 * ILI9322_INPUT_UNKNOWN the driver will try to figure it out by probing
 * the hardware
 * @vreg1out_mv: the output in microvolts for the VREGOUT1 regulator used
 * to drive the physical display. Valid ranges are 3600 thru 6000 in 100
 * microvolt increments. If not specified, hardware defaults will be
 * used (4.5V).
 * @vcom_high_percent: the percentage of VREGOUT1 used for the peak
 * voltage on the communications link. Valid ranges are 37 thru 100
 * percent. If not specified, hardware defaults will be used (91%).
 * @vcom_amplitude_percent: the percentage of VREGOUT1 used for the
 * peak-to-peak amplitude of the communcation signals to the physical
 * display. Valid ranges are 70 thru 132 percent in increments if two
 * percent. Odd percentages will be truncated. If not specified, hardware
 * defaults will be used (114%).
 * @dclk_active_high: data/pixel clock active high, data will be clocked
 * in on the rising edge of the DCLK (this is usually the case).
 * @syncmode: The synchronization mode, what sync signals are emitted.
 * See the enum for details.
 * @de_active_high: DE (data entry) is active high
 * @hsync_active_high: HSYNC is active high
 * @vsync_active_high: VSYNC is active high
 * @gamma_corr_pos: a set of 8 nybbles describing positive
 * gamma correction for voltages V1 thru V8. Valid range 0..15
 * @gamma_corr_neg: a set of 8 nybbles describing negative
 * gamma correction for voltages V1 thru V8. Valid range 0..15
 *
 * These adjust what grayscale voltage will be output for input data V1 = 0,
 * V2 = 16, V3 = 48, V4 = 96, V5 = 160, V6 = 208, V7 = 240 and V8 = 255.
 * The curve is shaped like this:
 *
 *  ^
 *  |                                                        V8
 *  |                                                   V7
 *  |                                          V6
 *  |                               V5
 *  |                    V4
 *  |            V3
 *  |     V2
 *  | V1
 *  +----------------------------------------------------------->
 *    0   16     48      96         160        208      240  255
 *
 * The negative and postive gamma values adjust the V1 thru V8 up/down
 * according to the datasheet specifications. This is a property of the
 * physical display connected to the display controller and may vary.
 * If defined, both arrays must be supplied in full. If the properties
 * are not supplied, hardware defaults will be used.
 */
struct ili9322_config {
	u32 width_mm;
	u32 height_mm;
	bool flip_horizontal;
	bool flip_vertical;
	enum ili9322_input input;
	u32 vreg1out_mv;
	u32 vcom_high_percent;
	u32 vcom_amplitude_percent;
	bool dclk_active_high;
	bool de_active_high;
	bool hsync_active_high;
	bool vsync_active_high;
	u8 syncmode;
	u8 gamma_corr_pos[8];
	u8 gamma_corr_neg[8];
};

struct ili9322 {
	struct device *dev;
	const struct ili9322_config *conf;
	struct drm_panel panel;
	struct regmap *regmap;
	struct regulator_bulk_data supplies[3];
	struct gpio_desc *reset_gpio;
	enum ili9322_input input;
	struct videomode vm;
	u8 gamma[8];
	u8 vreg1out;
	u8 vcom_high;
	u8 vcom_amplitude;
};

static inline struct ili9322 *panel_to_ili9322(struct drm_panel *panel)
{
	return container_of(panel, struct ili9322, panel);
}

static int ili9322_regmap_spi_write(void *context, const void *data,
				    size_t count)
{
	struct device *dev = context;
	struct spi_device *spi = to_spi_device(dev);
	u8 buf[2];

	/* Clear bit 7 to write */
	memcpy(buf, data, 2);
	buf[0] &= ~0x80;

	dev_dbg(dev, "WRITE: %02x %02x\n", buf[0], buf[1]);
	return spi_write_then_read(spi, buf, 2, NULL, 0);
}

static int ili9322_regmap_spi_read(void *context, const void *reg,
				   size_t reg_size, void *val, size_t val_size)
{
	struct device *dev = context;
	struct spi_device *spi = to_spi_device(dev);
	u8 buf[1];

	/* Set bit 7 to 1 to read */
	memcpy(buf, reg, 1);
	dev_dbg(dev, "READ: %02x reg size = %zu, val size = %zu\n",
		buf[0], reg_size, val_size);
	buf[0] |= 0x80;

	return spi_write_then_read(spi, buf, 1, val, 1);
}

static struct regmap_bus ili9322_regmap_bus = {
	.write = ili9322_regmap_spi_write,
	.read = ili9322_regmap_spi_read,
	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
	.val_format_endian_default = REGMAP_ENDIAN_BIG,
};

static bool ili9322_volatile_reg(struct device *dev, unsigned int reg)
{
	return false;
}

static bool ili9322_writeable_reg(struct device *dev, unsigned int reg)
{
	/* Just register 0 is read-only */
	if (reg == 0x00)
		return false;
	return true;
}

static const struct regmap_config ili9322_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = 0x44,
	.cache_type = REGCACHE_RBTREE,
	.volatile_reg = ili9322_volatile_reg,
	.writeable_reg = ili9322_writeable_reg,
};

static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
{
	u8 reg;
	int ret;
	int i;

	/* Reset display */
	ret = regmap_write(ili->regmap, ILI9322_GLOBAL_RESET,
			   ILI9322_GLOBAL_RESET_ASSERT);
	if (ret) {
		dev_err(ili->dev, "can't issue GRESET (%d)\n", ret);
		return ret;
	}

	/* Set up the main voltage regulator */
	if (ili->vreg1out != U8_MAX) {
		ret = regmap_write(ili->regmap, ILI9322_VREG1_VOLTAGE,
				   ili->vreg1out);
		if (ret) {
			dev_err(ili->dev, "can't set up VREG1OUT (%d)\n", ret);
			return ret;
		}
	}

	if (ili->vcom_amplitude != U8_MAX) {
		ret = regmap_write(ili->regmap, ILI9322_VCOM_AMP,
				   ili->vcom_amplitude);
		if (ret) {
			dev_err(ili->dev,
				"can't set up VCOM amplitude (%d)\n", ret);
			return ret;
		}
	}

	if (ili->vcom_high != U8_MAX) {
		ret = regmap_write(ili->regmap, ILI9322_VCOM_HIGH,
				   ili->vcom_high);
		if (ret) {
			dev_err(ili->dev, "can't set up VCOM high (%d)\n", ret);
			return ret;
		}
	}

	/* Set up gamma correction */
	for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) {
		ret = regmap_write(ili->regmap, ILI9322_GAMMA_1 + i,
				   ili->gamma[i]);
		if (ret) {
			dev_err(ili->dev,
				"can't write gamma V%d to 0x%02x (%d)\n",
				i + 1, ILI9322_GAMMA_1 + i, ret);
			return ret;
		}
	}

	/*
	 * Polarity and inverted color order for RGB input.
	 * None of this applies in the BT.656 mode.
	 */
	reg = 0;
	if (ili->conf->dclk_active_high)
		reg = ILI9322_POL_DCLK;
	if (ili->conf->de_active_high)
		reg |= ILI9322_POL_DE;
	if (ili->conf->hsync_active_high)
		reg |= ILI9322_POL_HSYNC;
	if (ili->conf->vsync_active_high)
		reg |= ILI9322_POL_VSYNC;
	ret = regmap_write(ili->regmap, ILI9322_POL, reg);
	if (ret) {
		dev_err(ili->dev, "can't write POL register (%d)\n", ret);
		return ret;
	}

	/*
	 * Set up interface control.
	 * This is not used in the BT.656 mode (no H/Vsync or DE signals).
	 */
	reg = ili->conf->syncmode;
	reg |= ILI9322_IF_CTRL_LINE_INVERSION;
	ret = regmap_write(ili->regmap, ILI9322_IF_CTRL, reg);
	if (ret) {
		dev_err(ili->dev, "can't write IF CTRL register (%d)\n", ret);
		return ret;
	}

	/* Set up the input mode */
	reg = (ili->input << 4);
	/* These are inverted, setting to 1 is the default, clearing flips */
	if (!ili->conf->flip_horizontal)
		reg |= ILI9322_ENTRY_HDIR;
	if (!ili->conf->flip_vertical)
		reg |= ILI9322_ENTRY_VDIR;
	reg |= ILI9322_ENTRY_AUTODETECT;
	ret = regmap_write(ili->regmap, ILI9322_ENTRY, reg);
	if (ret) {
		dev_err(ili->dev, "can't write ENTRY reg (%d)\n", ret);
		return ret;
	}
	dev_info(ili->dev, "display is in %s mode, syncmode %02x\n",
		 ili9322_inputs[ili->input],
		 ili->conf->syncmode);

	dev_info(ili->dev, "initialized display\n");

	return 0;
}

/*
 * This power-on sequence if from the datasheet, page 57.
 */
static int ili9322_power_on(struct ili9322 *ili)
{
	int ret;

	/* Assert RESET */
	gpiod_set_value(ili->reset_gpio, 1);

	ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies), ili->supplies);
	if (ret < 0) {
		dev_err(ili->dev, "unable to enable regulators\n");
		return ret;
	}
	msleep(20);

	/* De-assert RESET */
	gpiod_set_value(ili->reset_gpio, 0);

	msleep(10);

	return 0;
}

static int ili9322_power_off(struct ili9322 *ili)
{
	return regulator_bulk_disable(ARRAY_SIZE(ili->supplies), ili->supplies);
}

static int ili9322_disable(struct drm_panel *panel)
{
	struct ili9322 *ili = panel_to_ili9322(panel);
	int ret;

	ret = regmap_write(ili->regmap, ILI9322_POW_CTRL,
			   ILI9322_POW_CTRL_STANDBY);
	if (ret) {
		dev_err(ili->dev, "unable to go to standby mode\n");
		return ret;
	}

	return 0;
}

static int ili9322_unprepare(struct drm_panel *panel)
{
	struct ili9322 *ili = panel_to_ili9322(panel);

	return ili9322_power_off(ili);
}

static int ili9322_prepare(struct drm_panel *panel)
{
	struct ili9322 *ili = panel_to_ili9322(panel);
	int ret;

	ret = ili9322_power_on(ili);
	if (ret < 0)
		return ret;

	ret = ili9322_init(panel, ili);
	if (ret < 0)
		ili9322_unprepare(panel);

	return ret;
}

static int ili9322_enable(struct drm_panel *panel)
{
	struct ili9322 *ili = panel_to_ili9322(panel);
	int ret;

	ret = regmap_write(ili->regmap, ILI9322_POW_CTRL,
			   ILI9322_POW_CTRL_DEFAULT);
	if (ret) {
		dev_err(ili->dev, "unable to enable panel\n");
		return ret;
	}

	return 0;
}

/* Serial RGB modes */
static const struct drm_display_mode srgb_320x240_mode = {
	.clock = 24535,
	.hdisplay = 320,
	.hsync_start = 320 + 359,
	.hsync_end = 320 + 359 + 1,
	.htotal = 320 + 359 + 1 + 241,
	.vdisplay = 240,
	.vsync_start = 240 + 4,
	.vsync_end = 240 + 4 + 1,
	.vtotal = 262,
	.flags = 0,
};

static const struct drm_display_mode srgb_360x240_mode = {
	.clock = 27000,
	.hdisplay = 360,
	.hsync_start = 360 + 35,
	.hsync_end = 360 + 35 + 1,
	.htotal = 360 + 35 + 1 + 241,
	.vdisplay = 240,
	.vsync_start = 240 + 21,
	.vsync_end = 240 + 21 + 1,
	.vtotal = 262,
	.flags = 0,
};

/* This is the only mode listed for parallel RGB in the datasheet */
static const struct drm_display_mode prgb_320x240_mode = {
	.clock = 64000,
	.hdisplay = 320,
	.hsync_start = 320 + 38,
	.hsync_end = 320 + 38 + 1,
	.htotal = 320 + 38 + 1 + 50,
	.vdisplay = 240,
	.vsync_start = 240 + 4,
	.vsync_end = 240 + 4 + 1,
	.vtotal = 262,
	.flags = 0,
};

/* YUV modes */
static const struct drm_display_mode yuv_640x320_mode = {
	.clock = 24540,
	.hdisplay = 640,
	.hsync_start = 640 + 252,
	.hsync_end = 640 + 252 + 1,
	.htotal = 640 + 252 + 1 + 28,
	.vdisplay = 320,
	.vsync_start = 320 + 4,
	.vsync_end = 320 + 4 + 1,
	.vtotal = 320 + 4 + 1 + 18,
	.flags = 0,
};

static const struct drm_display_mode yuv_720x360_mode = {
	.clock = 27000,
	.hdisplay = 720,
	.hsync_start = 720 + 252,
	.hsync_end = 720 + 252 + 1,
	.htotal = 720 + 252 + 1 + 24,
	.vdisplay = 360,
	.vsync_start = 360 + 4,
	.vsync_end = 360 + 4 + 1,
	.vtotal = 360 + 4 + 1 + 18,
	.flags = 0,
};

/* BT.656 VGA mode, 640x480 */
static const struct drm_display_mode itu_r_bt_656_640_mode = {
	.clock = 24540,
	.hdisplay = 640,
	.hsync_start = 640 + 3,
	.hsync_end = 640 + 3 + 1,
	.htotal = 640 + 3 + 1 + 272,
	.vdisplay = 480,
	.vsync_start = 480 + 4,
	.vsync_end = 480 + 4 + 1,
	.vtotal = 500,
	.flags = 0,
};

/* BT.656 D1 mode 720x480 */
static const struct drm_display_mode itu_r_bt_656_720_mode = {
	.clock = 27000,
	.hdisplay = 720,
	.hsync_start = 720 + 3,
	.hsync_end = 720 + 3 + 1,
	.htotal = 720 + 3 + 1 + 272,
	.vdisplay = 480,
	.vsync_start = 480 + 4,
	.vsync_end = 480 + 4 + 1,
	.vtotal = 500,
	.flags = 0,
};

static int ili9322_get_modes(struct drm_panel *panel,
			     struct drm_connector *connector)
{
	struct ili9322 *ili = panel_to_ili9322(panel);
	struct drm_device *drm = connector->dev;
	struct drm_display_mode *mode;
	struct drm_display_info *info;

	info = &connector->display_info;
	info->width_mm = ili->conf->width_mm;
	info->height_mm = ili->conf->height_mm;
	if (ili->conf->dclk_active_high)
		info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
	else
		info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;

	if (ili->conf->de_active_high)
		info->bus_flags |= DRM_BUS_FLAG_DE_HIGH;
	else
		info->bus_flags |= DRM_BUS_FLAG_DE_LOW;

	switch (ili->input) {
	case ILI9322_INPUT_SRGB_DUMMY_320X240:
		mode = drm_mode_duplicate(drm, &srgb_320x240_mode);
		break;
	case ILI9322_INPUT_SRGB_DUMMY_360X240:
		mode = drm_mode_duplicate(drm, &srgb_360x240_mode);
		break;
	case ILI9322_INPUT_PRGB_THROUGH:
	case ILI9322_INPUT_PRGB_ALIGNED:
		mode = drm_mode_duplicate(drm, &prgb_320x240_mode);
		break;
	case ILI9322_INPUT_YUV_640X320_YCBCR:
		mode = drm_mode_duplicate(drm, &yuv_640x320_mode);
		break;
	case ILI9322_INPUT_YUV_720X360_YCBCR:
		mode = drm_mode_duplicate(drm, &yuv_720x360_mode);
		break;
	case ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR:
		mode = drm_mode_duplicate(drm, &itu_r_bt_656_720_mode);
		break;
	case ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR:
		mode = drm_mode_duplicate(drm, &itu_r_bt_656_640_mode);
		break;
	default:
		mode = NULL;
		break;
	}
	if (!mode) {
		dev_err(panel->dev, "bad mode or failed to add mode\n");
		return -EINVAL;
	}
	drm_mode_set_name(mode);
	/*
	 * This is the preferred mode because most people are going
	 * to want to use the display with VGA type graphics.
	 */
	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;

	/* Set up the polarity */
	if (ili->conf->hsync_active_high)
		mode->flags |= DRM_MODE_FLAG_PHSYNC;
	else
		mode->flags |= DRM_MODE_FLAG_NHSYNC;
	if (ili->conf->vsync_active_high)
		mode->flags |= DRM_MODE_FLAG_PVSYNC;
	else
		mode->flags |= DRM_MODE_FLAG_NVSYNC;

	mode->width_mm = ili->conf->width_mm;
	mode->height_mm = ili->conf->height_mm;
	drm_mode_probed_add(connector, mode);

	return 1; /* Number of modes */
}

static const struct drm_panel_funcs ili9322_drm_funcs = {
	.disable = ili9322_disable,
	.unprepare = ili9322_unprepare,
	.prepare = ili9322_prepare,
	.enable = ili9322_enable,
	.get_modes = ili9322_get_modes,
};

static int ili9322_probe(struct spi_device *spi)
{
	struct device *dev = &spi->dev;
	struct ili9322 *ili;
	const struct regmap_config *regmap_config;
	u8 gamma;
	u32 val;
	int ret;
	int i;

	ili = devm_kzalloc(dev, sizeof(struct ili9322), GFP_KERNEL);
	if (!ili)
		return -ENOMEM;

	spi_set_drvdata(spi, ili);

	ili->dev = dev;

	/*
	 * Every new incarnation of this display must have a unique
	 * data entry for the system in this driver.
	 */
	ili->conf = of_device_get_match_data(dev);
	if (!ili->conf) {
		dev_err(dev, "missing device configuration\n");
		return -ENODEV;
	}

	val = ili->conf->vreg1out_mv;
	if (!val) {
		/* Default HW value, do not touch (should be 4.5V) */
		ili->vreg1out = U8_MAX;
	} else {
		if (val < 3600) {
			dev_err(dev, "too low VREG1OUT\n");
			return -EINVAL;
		}
		if (val > 6000) {
			dev_err(dev, "too high VREG1OUT\n");
			return -EINVAL;
		}
		if ((val % 100) != 0) {
			dev_err(dev, "VREG1OUT is no even 100 microvolt\n");
			return -EINVAL;
		}
		val -= 3600;
		val /= 100;
		dev_dbg(dev, "VREG1OUT = 0x%02x\n", val);
		ili->vreg1out = val;
	}

	val = ili->conf->vcom_high_percent;
	if (!val) {
		/* Default HW value, do not touch (should be 91%) */
		ili->vcom_high = U8_MAX;
	} else {
		if (val < 37) {
			dev_err(dev, "too low VCOM high\n");
			return -EINVAL;
		}
		if (val > 100) {
			dev_err(dev, "too high VCOM high\n");
			return -EINVAL;
		}
		val -= 37;
		dev_dbg(dev, "VCOM high = 0x%02x\n", val);
		ili->vcom_high = val;
	}

	val = ili->conf->vcom_amplitude_percent;
	if (!val) {
		/* Default HW value, do not touch (should be 114%) */
		ili->vcom_high = U8_MAX;
	} else {
		if (val < 70) {
			dev_err(dev, "too low VCOM amplitude\n");
			return -EINVAL;
		}
		if (val > 132) {
			dev_err(dev, "too high VCOM amplitude\n");
			return -EINVAL;
		}
		val -= 70;
		val >>= 1; /* Increments of 2% */
		dev_dbg(dev, "VCOM amplitude = 0x%02x\n", val);
		ili->vcom_amplitude = val;
	}

	for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) {
		val = ili->conf->gamma_corr_neg[i];
		if (val > 15) {
			dev_err(dev, "negative gamma %u > 15, capping\n", val);
			val = 15;
		}
		gamma = val << 4;
		val = ili->conf->gamma_corr_pos[i];
		if (val > 15) {
			dev_err(dev, "positive gamma %u > 15, capping\n", val);
			val = 15;
		}
		gamma |= val;
		ili->gamma[i] = gamma;
		dev_dbg(dev, "gamma V%d: 0x%02x\n", i + 1, gamma);
	}

	ili->supplies[0].supply = "vcc"; /* 2.7-3.6 V */
	ili->supplies[1].supply = "iovcc"; /* 1.65-3.6V */
	ili->supplies[2].supply = "vci"; /* 2.7-3.6V */
	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ili->supplies),
				      ili->supplies);
	if (ret < 0)
		return ret;
	ret = regulator_set_voltage(ili->supplies[0].consumer,
				    2700000, 3600000);
	if (ret)
		return ret;
	ret = regulator_set_voltage(ili->supplies[1].consumer,
				    1650000, 3600000);
	if (ret)
		return ret;
	ret = regulator_set_voltage(ili->supplies[2].consumer,
				    2700000, 3600000);
	if (ret)
		return ret;

	ili->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(ili->reset_gpio)) {
		dev_err(dev, "failed to get RESET GPIO\n");
		return PTR_ERR(ili->reset_gpio);
	}

	spi->bits_per_word = 8;
	ret = spi_setup(spi);
	if (ret < 0) {
		dev_err(dev, "spi setup failed.\n");
		return ret;
	}
	regmap_config = &ili9322_regmap_config;
	ili->regmap = devm_regmap_init(dev, &ili9322_regmap_bus, dev,
				       regmap_config);
	if (IS_ERR(ili->regmap)) {
		dev_err(dev, "failed to allocate register map\n");
		return PTR_ERR(ili->regmap);
	}

	ret = regmap_read(ili->regmap, ILI9322_CHIP_ID, &val);
	if (ret) {
		dev_err(dev, "can't get chip ID (%d)\n", ret);
		return ret;
	}
	if (val != ILI9322_CHIP_ID_MAGIC) {
		dev_err(dev, "chip ID 0x%0x2, expected 0x%02x\n", val,
			ILI9322_CHIP_ID_MAGIC);
		return -ENODEV;
	}

	/* Probe the system to find the display setting */
	if (ili->conf->input == ILI9322_INPUT_UNKNOWN) {
		ret = regmap_read(ili->regmap, ILI9322_ENTRY, &val);
		if (ret) {
			dev_err(dev, "can't get entry setting (%d)\n", ret);
			return ret;
		}
		/* Input enum corresponds to HW setting */
		ili->input = (val >> 4) & 0x0f;
		if (ili->input >= ILI9322_INPUT_UNKNOWN)
			ili->input = ILI9322_INPUT_UNKNOWN;
	} else {
		ili->input = ili->conf->input;
	}

	drm_panel_init(&ili->panel, dev, &ili9322_drm_funcs,
		       DRM_MODE_CONNECTOR_DPI);

	drm_panel_add(&ili->panel);

	return 0;
}

static void ili9322_remove(struct spi_device *spi)
{
	struct ili9322 *ili = spi_get_drvdata(spi);

	ili9322_power_off(ili);
	drm_panel_remove(&ili->panel);
}

/*
 * The D-Link DIR-685 panel is marked LM918A01-1A SY-B4-091116-E0199
 */
static const struct ili9322_config ili9322_dir_685 = {
	.width_mm = 65,
	.height_mm = 50,
	.input = ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR,
	.vreg1out_mv = 4600,
	.vcom_high_percent = 91,
	.vcom_amplitude_percent = 114,
	.syncmode = ILI9322_IF_CTRL_SYNC_DISABLED,
	.dclk_active_high = true,
	.gamma_corr_neg = { 0xa, 0x5, 0x7, 0x7, 0x7, 0x5, 0x1, 0x6 },
	.gamma_corr_pos = { 0x7, 0x7, 0x3, 0x2, 0x3, 0x5, 0x7, 0x2 },
};

static const struct of_device_id ili9322_of_match[] = {
	{
		.compatible = "dlink,dir-685-panel",
		.data = &ili9322_dir_685,
	},
	{
		.compatible = "ilitek,ili9322",
		.data = NULL,
	},
	{ }
};
MODULE_DEVICE_TABLE(of, ili9322_of_match);

static struct spi_driver ili9322_driver = {
	.probe = ili9322_probe,
	.remove = ili9322_remove,
	.driver = {
		.name = "panel-ilitek-ili9322",
		.of_match_table = ili9322_of_match,
	},
};
module_spi_driver(ili9322_driver);

MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_DESCRIPTION("ILI9322 LCD panel driver");
MODULE_LICENSE("GPL v2");