summaryrefslogtreecommitdiff
path: root/drivers/net/phy/microchip_t1s.c
blob: 534ca7d1b061dd3421c7cf4c8812df8bedd039a4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
// SPDX-License-Identifier: GPL-2.0+
/*
 * Driver for Microchip 10BASE-T1S PHYs
 *
 * Support: Microchip Phys:
 *  lan8670/1/2 Rev.B1
 *  lan8650/1 Rev.B0 Internal PHYs
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>

#define PHY_ID_LAN867X_REVB1 0x0007C162
#define PHY_ID_LAN865X_REVB0 0x0007C1B3

#define LAN867X_REG_STS2 0x0019

#define LAN867x_RESET_COMPLETE_STS BIT(11)

#define LAN865X_REG_CFGPARAM_ADDR 0x00D8
#define LAN865X_REG_CFGPARAM_DATA 0x00D9
#define LAN865X_REG_CFGPARAM_CTRL 0x00DA
#define LAN865X_REG_STS2 0x0019

#define LAN865X_CFGPARAM_READ_ENABLE BIT(1)

/* The arrays below are pulled from the following table from AN1699
 * Access MMD Address Value Mask
 * RMW 0x1F 0x00D0 0x0002 0x0E03
 * RMW 0x1F 0x00D1 0x0000 0x0300
 * RMW 0x1F 0x0084 0x3380 0xFFC0
 * RMW 0x1F 0x0085 0x0006 0x000F
 * RMW 0x1F 0x008A 0xC000 0xF800
 * RMW 0x1F 0x0087 0x801C 0x801C
 * RMW 0x1F 0x0088 0x033F 0x1FFF
 * W   0x1F 0x008B 0x0404 ------
 * RMW 0x1F 0x0080 0x0600 0x0600
 * RMW 0x1F 0x00F1 0x2400 0x7F00
 * RMW 0x1F 0x0096 0x2000 0x2000
 * W   0x1F 0x0099 0x7F80 ------
 */

static const u32 lan867x_revb1_fixup_registers[12] = {
	0x00D0, 0x00D1, 0x0084, 0x0085,
	0x008A, 0x0087, 0x0088, 0x008B,
	0x0080, 0x00F1, 0x0096, 0x0099,
};

static const u16 lan867x_revb1_fixup_values[12] = {
	0x0002, 0x0000, 0x3380, 0x0006,
	0xC000, 0x801C, 0x033F, 0x0404,
	0x0600, 0x2400, 0x2000, 0x7F80,
};

static const u16 lan867x_revb1_fixup_masks[12] = {
	0x0E03, 0x0300, 0xFFC0, 0x000F,
	0xF800, 0x801C, 0x1FFF, 0xFFFF,
	0x0600, 0x7F00, 0x2000, 0xFFFF,
};

/* LAN865x Rev.B0 configuration parameters from AN1760 */
static const u32 lan865x_revb0_fixup_registers[28] = {
	0x0091, 0x0081, 0x0043, 0x0044,
	0x0045, 0x0053, 0x0054, 0x0055,
	0x0040, 0x0050, 0x00D0, 0x00E9,
	0x00F5, 0x00F4, 0x00F8, 0x00F9,
	0x00B0, 0x00B1, 0x00B2, 0x00B3,
	0x00B4, 0x00B5, 0x00B6, 0x00B7,
	0x00B8, 0x00B9, 0x00BA, 0x00BB,
};

static const u16 lan865x_revb0_fixup_values[28] = {
	0x9660, 0x00C0, 0x00FF, 0xFFFF,
	0x0000, 0x00FF, 0xFFFF, 0x0000,
	0x0002, 0x0002, 0x5F21, 0x9E50,
	0x1CF8, 0xC020, 0x9B00, 0x4E53,
	0x0103, 0x0910, 0x1D26, 0x002A,
	0x0103, 0x070D, 0x1720, 0x0027,
	0x0509, 0x0E13, 0x1C25, 0x002B,
};

static const u16 lan865x_revb0_fixup_cfg_regs[5] = {
	0x0084, 0x008A, 0x00AD, 0x00AE, 0x00AF
};

/* Pulled from AN1760 describing 'indirect read'
 *
 * write_register(0x4, 0x00D8, addr)
 * write_register(0x4, 0x00DA, 0x2)
 * return (int8)(read_register(0x4, 0x00D9))
 *
 * 0x4 refers to memory map selector 4, which maps to MDIO_MMD_VEND2
 */
static int lan865x_revb0_indirect_read(struct phy_device *phydev, u16 addr)
{
	int ret;

	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_ADDR,
			    addr);
	if (ret)
		return ret;

	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_CTRL,
			    LAN865X_CFGPARAM_READ_ENABLE);
	if (ret)
		return ret;

	return phy_read_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_DATA);
}

/* This is pulled straight from AN1760 from 'calculation of offset 1' &
 * 'calculation of offset 2'
 */
static int lan865x_generate_cfg_offsets(struct phy_device *phydev, s8 offsets[2])
{
	const u16 fixup_regs[2] = {0x0004, 0x0008};
	int ret;

	for (int i = 0; i < ARRAY_SIZE(fixup_regs); i++) {
		ret = lan865x_revb0_indirect_read(phydev, fixup_regs[i]);
		if (ret < 0)
			return ret;
		if (ret & BIT(4))
			offsets[i] = ret | 0xE0;
		else
			offsets[i] = ret;
	}

	return 0;
}

static int lan865x_read_cfg_params(struct phy_device *phydev, u16 cfg_params[])
{
	int ret;

	for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) {
		ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
				   lan865x_revb0_fixup_cfg_regs[i]);
		if (ret < 0)
			return ret;
		cfg_params[i] = (u16)ret;
	}

	return 0;
}

static int lan865x_write_cfg_params(struct phy_device *phydev, u16 cfg_params[])
{
	int ret;

	for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) {
		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
				    lan865x_revb0_fixup_cfg_regs[i],
				    cfg_params[i]);
		if (ret)
			return ret;
	}

	return 0;
}

static int lan865x_setup_cfgparam(struct phy_device *phydev)
{
	u16 cfg_params[ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs)];
	u16 cfg_results[5];
	s8 offsets[2];
	int ret;

	ret = lan865x_generate_cfg_offsets(phydev, offsets);
	if (ret)
		return ret;

	ret = lan865x_read_cfg_params(phydev, cfg_params);
	if (ret)
		return ret;

	cfg_results[0] = (cfg_params[0] & 0x000F) |
			  FIELD_PREP(GENMASK(15, 10), 9 + offsets[0]) |
			  FIELD_PREP(GENMASK(15, 4), 14 + offsets[0]);
	cfg_results[1] = (cfg_params[1] & 0x03FF) |
			  FIELD_PREP(GENMASK(15, 10), 40 + offsets[1]);
	cfg_results[2] = (cfg_params[2] & 0xC0C0) |
			  FIELD_PREP(GENMASK(15, 8), 5 + offsets[0]) |
			  (9 + offsets[0]);
	cfg_results[3] = (cfg_params[3] & 0xC0C0) |
			  FIELD_PREP(GENMASK(15, 8), 9 + offsets[0]) |
			  (14 + offsets[0]);
	cfg_results[4] = (cfg_params[4] & 0xC0C0) |
			  FIELD_PREP(GENMASK(15, 8), 17 + offsets[0]) |
			  (22 + offsets[0]);

	return lan865x_write_cfg_params(phydev, cfg_results);
}

static int lan865x_revb0_config_init(struct phy_device *phydev)
{
	int ret;

	/* Reference to AN1760
	 * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8650-1-Configuration-60001760.pdf
	 */
	for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_registers); i++) {
		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
				    lan865x_revb0_fixup_registers[i],
				    lan865x_revb0_fixup_values[i]);
		if (ret)
			return ret;
	}
	/* Function to calculate and write the configuration parameters in the
	 * 0x0084, 0x008A, 0x00AD, 0x00AE and 0x00AF registers (from AN1760)
	 */
	return lan865x_setup_cfgparam(phydev);
}

static int lan867x_revb1_config_init(struct phy_device *phydev)
{
	int err;

	/* The chip completes a reset in 3us, we might get here earlier than
	 * that, as an added margin we'll conditionally sleep 5us.
	 */
	err = phy_read_mmd(phydev, MDIO_MMD_VEND2, LAN867X_REG_STS2);
	if (err < 0)
		return err;

	if (!(err & LAN867x_RESET_COMPLETE_STS)) {
		udelay(5);
		err = phy_read_mmd(phydev, MDIO_MMD_VEND2, LAN867X_REG_STS2);
		if (err < 0)
			return err;
		if (!(err & LAN867x_RESET_COMPLETE_STS)) {
			phydev_err(phydev, "PHY reset failed\n");
			return -ENODEV;
		}
	}

	/* Reference to AN1699
	 * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8670-1-2-config-60001699.pdf
	 * AN1699 says Read, Modify, Write, but the Write is not required if the
	 * register already has the required value. So it is safe to use
	 * phy_modify_mmd here.
	 */
	for (int i = 0; i < ARRAY_SIZE(lan867x_revb1_fixup_registers); i++) {
		err = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
				     lan867x_revb1_fixup_registers[i],
				     lan867x_revb1_fixup_masks[i],
				     lan867x_revb1_fixup_values[i]);
		if (err)
			return err;
	}

	return 0;
}

static int lan86xx_read_status(struct phy_device *phydev)
{
	/* The phy has some limitations, namely:
	 *  - always reports link up
	 *  - only supports 10MBit half duplex
	 *  - does not support auto negotiate
	 */
	phydev->link = 1;
	phydev->duplex = DUPLEX_HALF;
	phydev->speed = SPEED_10;
	phydev->autoneg = AUTONEG_DISABLE;

	return 0;
}

static struct phy_driver microchip_t1s_driver[] = {
	{
		PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1),
		.name               = "LAN867X Rev.B1",
		.features           = PHY_BASIC_T1S_P2MP_FEATURES,
		.config_init        = lan867x_revb1_config_init,
		.read_status        = lan86xx_read_status,
		.get_plca_cfg	    = genphy_c45_plca_get_cfg,
		.set_plca_cfg	    = genphy_c45_plca_set_cfg,
		.get_plca_status    = genphy_c45_plca_get_status,
	},
	{
		PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0),
		.name               = "LAN865X Rev.B0 Internal Phy",
		.features           = PHY_BASIC_T1S_P2MP_FEATURES,
		.config_init        = lan865x_revb0_config_init,
		.read_status        = lan86xx_read_status,
		.get_plca_cfg	    = genphy_c45_plca_get_cfg,
		.set_plca_cfg	    = genphy_c45_plca_set_cfg,
		.get_plca_status    = genphy_c45_plca_get_status,
	},
};

module_phy_driver(microchip_t1s_driver);

static struct mdio_device_id __maybe_unused tbl[] = {
	{ PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1) },
	{ PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0) },
	{ }
};

MODULE_DEVICE_TABLE(mdio, tbl);

MODULE_DESCRIPTION("Microchip 10BASE-T1S PHYs driver");
MODULE_AUTHOR("Ramón Nordin Rodriguez");
MODULE_LICENSE("GPL");