Merge branch 'dpll-phase-offset-phase-adjust'

Arkadiusz Kubalewski says:

====================
dpll: add phase-offset and phase-adjust

Improve monitoring and control over dpll devices.
Allow user to receive measurement of phase difference between signals
on pin and dpll (phase-offset).
Allow user to receive and control adjustable value of pin's signal
phase (phase-adjust).

v4->v5:
- rebase series on top of net-next/main, fix conflict - remove redundant
  attribute type definition in subset definition

v3->v4:
- do not increase do version of uAPI header as it is not needed (v3 did
  not have this change)
- fix spelling around commit messages, argument descriptions and docs
- add missing extack errors on failure set callbacks for pin phase
  adjust and frequency
- remove ice check if value is already set, now redundant as checked in
  the dpll subsystem

v2->v3:
- do not increase do version of uAPI header as it is not needed

v1->v2:
- improve handling for error case of requesting the phase adjust set
- align handling for error case of frequency set request with the
approach introduced for phase adjust
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

9 files changed, 517 insertions, 18 deletions

diff --git a/Documentation/driver-api/dpll.rst b/Documentation/driver-api/dpll.rst
index 69670deb8c4e..e3d593841aa7 100644
--- a/Documentation/driver-api/dpll.rst
+++ b/Documentation/driver-api/dpll.rst
@@ -173,6 +173,47 @@ in order to configure active input of a MUX-type pin, the user needs to
 request desired pin state of the child pin on the parent pin,
 as described in the ``MUX-type pins`` chapter.
 
+Phase offset measurement and adjustment
+========================================
+
+Device may provide ability to measure a phase difference between signals
+on a pin and its parent dpll device. If pin-dpll phase offset measurement
+is supported, it shall be provided with ``DPLL_A_PIN_PHASE_OFFSET``
+attribute for each parent dpll device.
+
+Device may also provide ability to adjust a signal phase on a pin.
+If pin phase adjustment is supported, minimal and maximal values that pin
+handle shall be provide to the user on ``DPLL_CMD_PIN_GET`` respond
+with ``DPLL_A_PIN_PHASE_ADJUST_MIN`` and ``DPLL_A_PIN_PHASE_ADJUST_MAX``
+attributes. Configured phase adjust value is provided with
+``DPLL_A_PIN_PHASE_ADJUST`` attribute of a pin, and value change can be
+requested with the same attribute with ``DPLL_CMD_PIN_SET`` command.
+
+  =============================== ======================================
+  ``DPLL_A_PIN_ID``               configured pin id
+  ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment
+  ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase adjustment
+  ``DPLL_A_PIN_PHASE_ADJUST``     attr configured value of phase
+                                  adjustment on parent dpll device
+  ``DPLL_A_PIN_PARENT_DEVICE``    nested attribute for requesting
+                                  configuration on given parent dpll
+                                  device
+    ``DPLL_A_PIN_PARENT_ID``      parent dpll device id
+    ``DPLL_A_PIN_PHASE_OFFSET``   attr measured phase difference
+                                  between a pin and parent dpll device
+  =============================== ======================================
+
+All phase related values are provided in pico seconds, which represents
+time difference between signals phase. The negative value means that
+phase of signal on pin is earlier in time than dpll's signal. Positive
+value means that phase of signal on pin is later in time than signal of
+a dpll.
+
+Phase adjust (also min and max) values are integers, but measured phase
+offset values are fractional with 3-digit decimal places and shell be
+divided with ``DPLL_PIN_PHASE_OFFSET_DIVIDER`` to get integer part and
+modulo divided to get fractional part.
+
 Configuration commands group
 ============================
 
@@ -263,6 +304,12 @@ according to attribute purpose.
                                        frequencies
       ``DPLL_A_PIN_ANY_FREQUENCY_MIN`` attr minimum value of frequency
       ``DPLL_A_PIN_ANY_FREQUENCY_MAX`` attr maximum value of frequency
+    ``DPLL_A_PIN_PHASE_ADJUST_MIN``    attr minimum value of phase
+                                       adjustment
+    ``DPLL_A_PIN_PHASE_ADJUST_MAX``    attr maximum value of phase
+                                       adjustment
+    ``DPLL_A_PIN_PHASE_ADJUST``        attr configured value of phase
+                                       adjustment on parent device
     ``DPLL_A_PIN_PARENT_DEVICE``       nested attr for each parent device
                                        the pin is connected with
       ``DPLL_A_PIN_PARENT_ID``         attr parent dpll device id
@@ -270,8 +317,10 @@ according to attribute purpose.
                                        dpll device
       ``DPLL_A_PIN_STATE``             attr state of pin on the parent
                                        dpll device
-     ``DPLL_A_PIN_DIRECTION``          attr direction of a pin on the
+      ``DPLL_A_PIN_DIRECTION``         attr direction of a pin on the
                                        parent dpll device
+      ``DPLL_A_PIN_PHASE_OFFSET``      attr measured phase difference
+                                       between a pin and parent dpll
     ``DPLL_A_PIN_PARENT_PIN``          nested attr for each parent pin
                                        the pin is connected with
       ``DPLL_A_PIN_PARENT_ID``         attr parent pin id
@@ -284,6 +333,8 @@ according to attribute purpose.
   ``DPLL_CMD_PIN_SET``                 command to set pins configuration
     ``DPLL_A_PIN_ID``                  attr unique a pin ID
     ``DPLL_A_PIN_FREQUENCY``           attr requested frequency of a pin
+    ``DPLL_A_PIN_PHASE_ADJUST``        attr requested value of phase
+                                       adjustment on parent device
     ``DPLL_A_PIN_PARENT_DEVICE``       nested attr for each parent dpll
                                        device configuration request
       ``DPLL_A_PIN_PARENT_ID``         attr parent dpll device id
diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
index 1c1b53136c7b..cf8abe1c0550 100644
--- a/Documentation/netlink/specs/dpll.yaml
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -164,6 +164,18 @@ definitions:
       -
         name: state-can-change
         doc: pin state can be changed
+  -
+    type: const
+    name: phase-offset-divider
+    value: 1000
+    doc: |
+      phase offset divider allows userspace to calculate a value of
+      measured signal phase difference between a pin and dpll device
+      as a fractional value with three digit decimal precision.
+      Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an
+      integer part of a measured phase offset value.
+      Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
+      fractional part of a measured phase offset value.
 
 attribute-sets:
   -
@@ -272,6 +284,18 @@ attribute-sets:
         type: nest
         multi-attr: true
         nested-attributes: pin-parent-pin
+      -
+        name: phase-adjust-min
+        type: s32
+      -
+        name: phase-adjust-max
+        type: s32
+      -
+        name: phase-adjust
+        type: s32
+      -
+        name: phase-offset
+        type: s64
   -
     name: pin-parent-device
     subset-of: pin
@@ -284,6 +308,8 @@ attribute-sets:
         name: prio
       -
         name: state
+      -
+        name: phase-offset
   -
     name: pin-parent-pin
     subset-of: pin
@@ -431,6 +457,9 @@ operations:
             - capabilities
             - parent-device
             - parent-pin
+            - phase-adjust-min
+            - phase-adjust-max
+            - phase-adjust
 
       dump:
         pre: dpll-lock-dumpit
@@ -458,6 +487,7 @@ operations:
             - state
             - parent-device
             - parent-pin
+            - phase-adjust
     -
       name: pin-create-ntf
       doc: Notification about pin appearing
diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
index e20daba6896a..a6dc3997bf5c 100644
--- a/drivers/dpll/dpll_netlink.c
+++ b/drivers/dpll/dpll_netlink.c
@@ -213,6 +213,53 @@ dpll_msg_add_pin_direction(struct sk_buff *msg, struct dpll_pin *pin,
 }
 
 static int
+dpll_msg_add_pin_phase_adjust(struct sk_buff *msg, struct dpll_pin *pin,
+			      struct dpll_pin_ref *ref,
+			      struct netlink_ext_ack *extack)
+{
+	const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
+	struct dpll_device *dpll = ref->dpll;
+	s32 phase_adjust;
+	int ret;
+
+	if (!ops->phase_adjust_get)
+		return 0;
+	ret = ops->phase_adjust_get(pin, dpll_pin_on_dpll_priv(dpll, pin),
+				    dpll, dpll_priv(dpll),
+				    &phase_adjust, extack);
+	if (ret)
+		return ret;
+	if (nla_put_s32(msg, DPLL_A_PIN_PHASE_ADJUST, phase_adjust))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int
+dpll_msg_add_phase_offset(struct sk_buff *msg, struct dpll_pin *pin,
+			  struct dpll_pin_ref *ref,
+			  struct netlink_ext_ack *extack)
+{
+	const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
+	struct dpll_device *dpll = ref->dpll;
+	s64 phase_offset;
+	int ret;
+
+	if (!ops->phase_offset_get)
+		return 0;
+	ret = ops->phase_offset_get(pin, dpll_pin_on_dpll_priv(dpll, pin),
+				    dpll, dpll_priv(dpll), &phase_offset,
+				    extack);
+	if (ret)
+		return ret;
+	if (nla_put_64bit(msg, DPLL_A_PIN_PHASE_OFFSET, sizeof(phase_offset),
+			  &phase_offset, DPLL_A_PIN_PAD))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+static int
 dpll_msg_add_pin_freq(struct sk_buff *msg, struct dpll_pin *pin,
 		      struct dpll_pin_ref *ref, struct netlink_ext_ack *extack)
 {
@@ -332,6 +379,9 @@ dpll_msg_add_pin_dplls(struct sk_buff *msg, struct dpll_pin *pin,
 		ret = dpll_msg_add_pin_direction(msg, pin, ref, extack);
 		if (ret)
 			goto nest_cancel;
+		ret = dpll_msg_add_phase_offset(msg, pin, ref, extack);
+		if (ret)
+			goto nest_cancel;
 		nla_nest_end(msg, attr);
 	}
 
@@ -379,6 +429,15 @@ dpll_cmd_pin_get_one(struct sk_buff *msg, struct dpll_pin *pin,
 	ret = dpll_msg_add_pin_freq(msg, pin, ref, extack);
 	if (ret)
 		return ret;
+	if (nla_put_s32(msg, DPLL_A_PIN_PHASE_ADJUST_MIN,
+			prop->phase_range.min))
+		return -EMSGSIZE;
+	if (nla_put_s32(msg, DPLL_A_PIN_PHASE_ADJUST_MAX,
+			prop->phase_range.max))
+		return -EMSGSIZE;
+	ret = dpll_msg_add_pin_phase_adjust(msg, pin, ref, extack);
+	if (ret)
+		return ret;
 	if (xa_empty(&pin->parent_refs))
 		ret = dpll_msg_add_pin_dplls(msg, pin, extack);
 	else
@@ -416,7 +475,7 @@ dpll_device_get_one(struct dpll_device *dpll, struct sk_buff *msg,
 	if (nla_put_u32(msg, DPLL_A_TYPE, dpll->type))
 		return -EMSGSIZE;
 
-	return ret;
+	return 0;
 }
 
 static int
@@ -556,8 +615,10 @@ static int
 dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
 		  struct netlink_ext_ack *extack)
 {
-	u64 freq = nla_get_u64(a);
-	struct dpll_pin_ref *ref;
+	u64 freq = nla_get_u64(a), old_freq;
+	struct dpll_pin_ref *ref, *failed;
+	const struct dpll_pin_ops *ops;
+	struct dpll_device *dpll;
 	unsigned long i;
 	int ret;
 
@@ -567,19 +628,51 @@ dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
 	}
 
 	xa_for_each(&pin->dpll_refs, i, ref) {
-		const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
-		struct dpll_device *dpll = ref->dpll;
-
-		if (!ops->frequency_set)
+		ops = dpll_pin_ops(ref);
+		if (!ops->frequency_set || !ops->frequency_get) {
+			NL_SET_ERR_MSG(extack, "frequency set not supported by the device");
 			return -EOPNOTSUPP;
+		}
+	}
+	ref = dpll_xa_ref_dpll_first(&pin->dpll_refs);
+	ops = dpll_pin_ops(ref);
+	dpll = ref->dpll;
+	ret = ops->frequency_get(pin, dpll_pin_on_dpll_priv(dpll, pin), dpll,
+				 dpll_priv(dpll), &old_freq, extack);
+	if (ret) {
+		NL_SET_ERR_MSG(extack, "unable to get old frequency value");
+		return ret;
+	}
+	if (freq == old_freq)
+		return 0;
+
+	xa_for_each(&pin->dpll_refs, i, ref) {
+		ops = dpll_pin_ops(ref);
+		dpll = ref->dpll;
 		ret = ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin),
 					 dpll, dpll_priv(dpll), freq, extack);
-		if (ret)
-			return ret;
+		if (ret) {
+			failed = ref;
+			NL_SET_ERR_MSG_FMT(extack, "frequency set failed for dpll_id:%u",
+					   dpll->id);
+			goto rollback;
+		}
 	}
 	__dpll_pin_change_ntf(pin);
 
 	return 0;
+
+rollback:
+	xa_for_each(&pin->dpll_refs, i, ref) {
+		if (ref == failed)
+			break;
+		ops = dpll_pin_ops(ref);
+		dpll = ref->dpll;
+		if (ops->frequency_set(pin, dpll_pin_on_dpll_priv(dpll, pin),
+				       dpll, dpll_priv(dpll), old_freq, extack))
+			NL_SET_ERR_MSG(extack, "set frequency rollback failed");
+	}
+	return ret;
 }
 
 static int
@@ -706,6 +799,78 @@ dpll_pin_direction_set(struct dpll_pin *pin, struct dpll_device *dpll,
 }
 
 static int
+dpll_pin_phase_adj_set(struct dpll_pin *pin, struct nlattr *phase_adj_attr,
+		       struct netlink_ext_ack *extack)
+{
+	struct dpll_pin_ref *ref, *failed;
+	const struct dpll_pin_ops *ops;
+	s32 phase_adj, old_phase_adj;
+	struct dpll_device *dpll;
+	unsigned long i;
+	int ret;
+
+	phase_adj = nla_get_s32(phase_adj_attr);
+	if (phase_adj > pin->prop->phase_range.max ||
+	    phase_adj < pin->prop->phase_range.min) {
+		NL_SET_ERR_MSG_ATTR(extack, phase_adj_attr,
+				    "phase adjust value not supported");
+		return -EINVAL;
+	}
+
+	xa_for_each(&pin->dpll_refs, i, ref) {
+		ops = dpll_pin_ops(ref);
+		if (!ops->phase_adjust_set || !ops->phase_adjust_get) {
+			NL_SET_ERR_MSG(extack, "phase adjust not supported");
+			return -EOPNOTSUPP;
+		}
+	}
+	ref = dpll_xa_ref_dpll_first(&pin->dpll_refs);
+	ops = dpll_pin_ops(ref);
+	dpll = ref->dpll;
+	ret = ops->phase_adjust_get(pin, dpll_pin_on_dpll_priv(dpll, pin),
+				    dpll, dpll_priv(dpll), &old_phase_adj,
+				    extack);
+	if (ret) {
+		NL_SET_ERR_MSG(extack, "unable to get old phase adjust value");
+		return ret;
+	}
+	if (phase_adj == old_phase_adj)
+		return 0;
+
+	xa_for_each(&pin->dpll_refs, i, ref) {
+		ops = dpll_pin_ops(ref);
+		dpll = ref->dpll;
+		ret = ops->phase_adjust_set(pin,
+					    dpll_pin_on_dpll_priv(dpll, pin),
+					    dpll, dpll_priv(dpll), phase_adj,
+					    extack);
+		if (ret) {
+			failed = ref;
+			NL_SET_ERR_MSG_FMT(extack,
+					   "phase adjust set failed for dpll_id:%u",
+					   dpll->id);
+			goto rollback;
+		}
+	}
+	__dpll_pin_change_ntf(pin);
+
+	return 0;
+
+rollback:
+	xa_for_each(&pin->dpll_refs, i, ref) {
+		if (ref == failed)
+			break;
+		ops = dpll_pin_ops(ref);
+		dpll = ref->dpll;
+		if (ops->phase_adjust_set(pin, dpll_pin_on_dpll_priv(dpll, pin),
+					  dpll, dpll_priv(dpll), old_phase_adj,
+					  extack))
+			NL_SET_ERR_MSG(extack, "set phase adjust rollback failed");
+	}
+	return ret;
+}
+
+static int
 dpll_pin_parent_device_set(struct dpll_pin *pin, struct nlattr *parent_nest,
 			   struct netlink_ext_ack *extack)
 {
@@ -793,6 +958,11 @@ dpll_pin_set_from_nlattr(struct dpll_pin *pin, struct genl_info *info)
 			if (ret)
 				return ret;
 			break;
+		case DPLL_A_PIN_PHASE_ADJUST:
+			ret = dpll_pin_phase_adj_set(pin, a, info->extack);
+			if (ret)
+				return ret;
+			break;
 		case DPLL_A_PIN_PARENT_DEVICE:
 			ret = dpll_pin_parent_device_set(pin, a, info->extack);
 			if (ret)
diff --git a/drivers/dpll/dpll_nl.c b/drivers/dpll/dpll_nl.c
index 14064c8c783b..eaee5be7aa64 100644
--- a/drivers/dpll/dpll_nl.c
+++ b/drivers/dpll/dpll_nl.c
@@ -11,11 +11,12 @@
 #include <uapi/linux/dpll.h>
 
 /* Common nested types */
-const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1] = {
+const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1] = {
 	[DPLL_A_PIN_PARENT_ID] = { .type = NLA_U32, },
 	[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
 	[DPLL_A_PIN_PRIO] = { .type = NLA_U32, },
 	[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
+	[DPLL_A_PIN_PHASE_OFFSET] = { .type = NLA_S64, },
 };
 
 const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1] = {
@@ -61,7 +62,7 @@ static const struct nla_policy dpll_pin_get_dump_nl_policy[DPLL_A_PIN_ID + 1] =
 };
 
 /* DPLL_CMD_PIN_SET - do */
-static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1] = {
+static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PHASE_ADJUST + 1] = {
 	[DPLL_A_PIN_ID] = { .type = NLA_U32, },
 	[DPLL_A_PIN_FREQUENCY] = { .type = NLA_U64, },
 	[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
@@ -69,6 +70,7 @@ static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_PIN + 1]
 	[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
 	[DPLL_A_PIN_PARENT_DEVICE] = NLA_POLICY_NESTED(dpll_pin_parent_device_nl_policy),
 	[DPLL_A_PIN_PARENT_PIN] = NLA_POLICY_NESTED(dpll_pin_parent_pin_nl_policy),
+	[DPLL_A_PIN_PHASE_ADJUST] = { .type = NLA_S32, },
 };
 
 /* Ops table for dpll */
@@ -140,7 +142,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
 		.doit		= dpll_nl_pin_set_doit,
 		.post_doit	= dpll_pin_post_doit,
 		.policy		= dpll_pin_set_nl_policy,
-		.maxattr	= DPLL_A_PIN_PARENT_PIN,
+		.maxattr	= DPLL_A_PIN_PHASE_ADJUST,
 		.flags		= GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
 	},
 };
diff --git a/drivers/dpll/dpll_nl.h b/drivers/dpll/dpll_nl.h
index 1f67aaed4742..92d4c9c4f788 100644
--- a/drivers/dpll/dpll_nl.h
+++ b/drivers/dpll/dpll_nl.h
@@ -12,7 +12,7 @@
 #include <uapi/linux/dpll.h>
 
 /* Common nested types */
-extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_STATE + 1];
+extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1];
 extern const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1];
 
 int dpll_lock_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c
index 1faee9cb944d..835c419ccc74 100644
--- a/drivers/net/ethernet/intel/ice/ice_dpll.c
+++ b/drivers/net/ethernet/intel/ice/ice_dpll.c
@@ -879,6 +879,199 @@ ice_dpll_output_direction(const struct dpll_pin *pin, void *pin_priv,
 }
 
 /**
+ * ice_dpll_pin_phase_adjust_get - callback for get pin phase adjust value
+ * @pin: pointer to a pin
+ * @pin_priv: private data pointer passed on pin registration
+ * @dpll: registered dpll pointer
+ * @dpll_priv: private data pointer passed on dpll registration
+ * @phase_adjust: on success holds pin phase_adjust value
+ * @extack: error reporting
+ *
+ * Dpll subsystem callback. Handler for getting phase adjust value of a pin.
+ *
+ * Context: Acquires pf->dplls.lock
+ * Return:
+ * * 0 - success
+ * * negative - error
+ */
+static int
+ice_dpll_pin_phase_adjust_get(const struct dpll_pin *pin, void *pin_priv,
+			      const struct dpll_device *dpll, void *dpll_priv,
+			      s32 *phase_adjust,
+			      struct netlink_ext_ack *extack)
+{
+	struct ice_dpll_pin *p = pin_priv;
+	struct ice_pf *pf = p->pf;
+
+	mutex_lock(&pf->dplls.lock);
+	*phase_adjust = p->phase_adjust;
+	mutex_unlock(&pf->dplls.lock);
+
+	return 0;
+}
+
+/**
+ * ice_dpll_pin_phase_adjust_set - helper for setting a pin phase adjust value
+ * @pin: pointer to a pin
+ * @pin_priv: private data pointer passed on pin registration
+ * @dpll: registered dpll pointer
+ * @dpll_priv: private data pointer passed on dpll registration
+ * @phase_adjust: phase_adjust to be set
+ * @extack: error reporting
+ * @type: type of a pin
+ *
+ * Helper for dpll subsystem callback. Handler for setting phase adjust value
+ * of a pin.
+ *
+ * Context: Acquires pf->dplls.lock
+ * Return:
+ * * 0 - success
+ * * negative - error
+ */
+static int
+ice_dpll_pin_phase_adjust_set(const struct dpll_pin *pin, void *pin_priv,
+			      const struct dpll_device *dpll, void *dpll_priv,
+			      s32 phase_adjust,
+			      struct netlink_ext_ack *extack,
+			      enum ice_dpll_pin_type type)
+{
+	struct ice_dpll_pin *p = pin_priv;
+	struct ice_dpll *d = dpll_priv;
+	struct ice_pf *pf = d->pf;
+	u8 flag, flags_en = 0;
+	int ret;
+
+	mutex_lock(&pf->dplls.lock);
+	switch (type) {
+	case ICE_DPLL_PIN_TYPE_INPUT:
+		flag = ICE_AQC_SET_CGU_IN_CFG_FLG1_UPDATE_DELAY;
+		if (p->flags[0] & ICE_AQC_GET_CGU_IN_CFG_FLG2_ESYNC_EN)
+			flags_en |= ICE_AQC_SET_CGU_IN_CFG_FLG2_ESYNC_EN;
+		if (p->flags[0] & ICE_AQC_GET_CGU_IN_CFG_FLG2_INPUT_EN)
+			flags_en |= ICE_AQC_SET_CGU_IN_CFG_FLG2_INPUT_EN;
+		ret = ice_aq_set_input_pin_cfg(&pf->hw, p->idx, flag, flags_en,
+					       0, phase_adjust);
+		break;
+	case ICE_DPLL_PIN_TYPE_OUTPUT:
+		flag = ICE_AQC_SET_CGU_OUT_CFG_UPDATE_PHASE;
+		if (p->flags[0] & ICE_AQC_GET_CGU_OUT_CFG_OUT_EN)
+			flag |= ICE_AQC_SET_CGU_OUT_CFG_OUT_EN;
+		if (p->flags[0] & ICE_AQC_GET_CGU_OUT_CFG_ESYNC_EN)
+			flag |= ICE_AQC_SET_CGU_OUT_CFG_ESYNC_EN;
+		ret = ice_aq_set_output_pin_cfg(&pf->hw, p->idx, flag, 0, 0,
+						phase_adjust);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (!ret)
+		p->phase_adjust = phase_adjust;
+	mutex_unlock(&pf->dplls.lock);
+	if (ret)
+		NL_SET_ERR_MSG_FMT(extack,
+				   "err:%d %s failed to set pin phase_adjust:%d for pin:%u on dpll:%u\n",
+				   ret,
+				   ice_aq_str(pf->hw.adminq.sq_last_status),
+				   phase_adjust, p->idx, d->dpll_idx);
+
+	return ret;
+}
+
+/**
+ * ice_dpll_input_phase_adjust_set - callback for set input pin phase adjust
+ * @pin: pointer to a pin
+ * @pin_priv: private data pointer passed on pin registration
+ * @dpll: registered dpll pointer
+ * @dpll_priv: private data pointer passed on dpll registration
+ * @phase_adjust: phase_adjust to be set
+ * @extack: error reporting
+ *
+ * Dpll subsystem callback. Wraps a handler for setting phase adjust on input
+ * pin.
+ *
+ * Context: Calls a function which acquires pf->dplls.lock
+ * Return:
+ * * 0 - success
+ * * negative - error
+ */
+static int
+ice_dpll_input_phase_adjust_set(const struct dpll_pin *pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				s32 phase_adjust,
+				struct netlink_ext_ack *extack)
+{
+	return ice_dpll_pin_phase_adjust_set(pin, pin_priv, dpll, dpll_priv,
+					     phase_adjust, extack,
+					     ICE_DPLL_PIN_TYPE_INPUT);
+}
+
+/**
+ * ice_dpll_output_phase_adjust_set - callback for set output pin phase adjust
+ * @pin: pointer to a pin
+ * @pin_priv: private data pointer passed on pin registration
+ * @dpll: registered dpll pointer
+ * @dpll_priv: private data pointer passed on dpll registration
+ * @phase_adjust: phase_adjust to be set
+ * @extack: error reporting
+ *
+ * Dpll subsystem callback. Wraps a handler for setting phase adjust on output
+ * pin.
+ *
+ * Context: Calls a function which acquires pf->dplls.lock
+ * Return:
+ * * 0 - success
+ * * negative - error
+ */
+static int
+ice_dpll_output_phase_adjust_set(const struct dpll_pin *pin, void *pin_priv,
+				 const struct dpll_device *dpll, void *dpll_priv,
+				 s32 phase_adjust,
+				 struct netlink_ext_ack *extack)
+{
+	return ice_dpll_pin_phase_adjust_set(pin, pin_priv, dpll, dpll_priv,
+					     phase_adjust, extack,
+					     ICE_DPLL_PIN_TYPE_OUTPUT);
+}
+
+#define ICE_DPLL_PHASE_OFFSET_DIVIDER	100
+#define ICE_DPLL_PHASE_OFFSET_FACTOR		\
+	(DPLL_PHASE_OFFSET_DIVIDER / ICE_DPLL_PHASE_OFFSET_DIVIDER)
+/**
+ * ice_dpll_phase_offset_get - callback for get dpll phase shift value
+ * @pin: pointer to a pin
+ * @pin_priv: private data pointer passed on pin registration
+ * @dpll: registered dpll pointer
+ * @dpll_priv: private data pointer passed on dpll registration
+ * @phase_offset: on success holds pin phase_offset value
+ * @extack: error reporting
+ *
+ * Dpll subsystem callback. Handler for getting phase shift value between
+ * dpll's input and output.
+ *
+ * Context: Acquires pf->dplls.lock
+ * Return:
+ * * 0 - success
+ * * negative - error
+ */
+static int
+ice_dpll_phase_offset_get(const struct dpll_pin *pin, void *pin_priv,
+			  const struct dpll_device *dpll, void *dpll_priv,
+			  s64 *phase_offset, struct netlink_ext_ack *extack)
+{
+	struct ice_dpll *d = dpll_priv;
+	struct ice_pf *pf = d->pf;
+
+	mutex_lock(&pf->dplls.lock);
+	if (d->active_input == pin)
+		*phase_offset = d->phase_offset * ICE_DPLL_PHASE_OFFSET_FACTOR;
+	else
+		*phase_offset = 0;
+	mutex_unlock(&pf->dplls.lock);
+
+	return 0;
+}
+
+/**
  * ice_dpll_rclk_state_on_pin_set - set a state on rclk pin
  * @pin: pointer to a pin
  * @pin_priv: private data pointer passed on pin registration
@@ -993,6 +1186,9 @@ static const struct dpll_pin_ops ice_dpll_input_ops = {
 	.prio_get = ice_dpll_input_prio_get,
 	.prio_set = ice_dpll_input_prio_set,
 	.direction_get = ice_dpll_input_direction,
+	.phase_adjust_get = ice_dpll_pin_phase_adjust_get,
+	.phase_adjust_set = ice_dpll_input_phase_adjust_set,
+	.phase_offset_get = ice_dpll_phase_offset_get,
 };
 
 static const struct dpll_pin_ops ice_dpll_output_ops = {
@@ -1001,6 +1197,8 @@ static const struct dpll_pin_ops ice_dpll_output_ops = {
 	.state_on_dpll_get = ice_dpll_output_state_get,
 	.state_on_dpll_set = ice_dpll_output_state_set,
 	.direction_get = ice_dpll_output_direction,
+	.phase_adjust_get = ice_dpll_pin_phase_adjust_get,
+	.phase_adjust_set = ice_dpll_output_phase_adjust_set,
 };
 
 static const struct dpll_device_ops ice_dpll_ops = {
@@ -1031,6 +1229,8 @@ static u64 ice_generate_clock_id(struct ice_pf *pf)
  */
 static void ice_dpll_notify_changes(struct ice_dpll *d)
 {
+	bool pin_notified = false;
+
 	if (d->prev_dpll_state != d->dpll_state) {
 		d->prev_dpll_state = d->dpll_state;
 		dpll_device_change_ntf(d->dpll);
@@ -1039,7 +1239,14 @@ static void ice_dpll_notify_changes(struct ice_dpll *d)
 		if (d->prev_input)
 			dpll_pin_change_ntf(d->prev_input);
 		d->prev_input = d->active_input;
-		if (d->active_input)
+		if (d->active_input) {
+			dpll_pin_change_ntf(d->active_input);
+			pin_notified = true;
+		}
+	}
+	if (d->prev_phase_offset != d->phase_offset) {
+		d->prev_phase_offset = d->phase_offset;
+		if (!pin_notified && d->active_input)
 			dpll_pin_change_ntf(d->active_input);
 	}
 }
@@ -1065,7 +1272,7 @@ ice_dpll_update_state(struct ice_pf *pf, struct ice_dpll *d, bool init)
 
 	ret = ice_get_cgu_state(&pf->hw, d->dpll_idx, d->prev_dpll_state,
 				&d->input_idx, &d->ref_state, &d->eec_mode,
-				&d->phase_shift, &d->dpll_state);
+				&d->phase_offset, &d->dpll_state);
 
 	dev_dbg(ice_pf_to_dev(pf),
 		"update dpll=%d, prev_src_idx:%u, src_idx:%u, state:%d, prev:%d mode:%d\n",
@@ -1656,6 +1863,15 @@ ice_dpll_init_info_direct_pins(struct ice_pf *pf,
 				return ret;
 			pins[i].prop.capabilities |=
 				DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE;
+			pins[i].prop.phase_range.min =
+				pf->dplls.input_phase_adj_max;
+			pins[i].prop.phase_range.max =
+				-pf->dplls.input_phase_adj_max;
+		} else {
+			pins[i].prop.phase_range.min =
+				pf->dplls.output_phase_adj_max;
+			pins[i].prop.phase_range.max =
+				-pf->dplls.output_phase_adj_max;
 		}
 		pins[i].prop.capabilities |=
 			DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.h b/drivers/net/ethernet/intel/ice/ice_dpll.h
index 2dfe764b81e1..bb32b6d88373 100644
--- a/drivers/net/ethernet/intel/ice/ice_dpll.h
+++ b/drivers/net/ethernet/intel/ice/ice_dpll.h
@@ -19,6 +19,7 @@
  * @state: state of a pin
  * @prop: pin properties
  * @freq: current frequency of a pin
+ * @phase_adjust: current phase adjust value
  */
 struct ice_dpll_pin {
 	struct dpll_pin *pin;
@@ -30,6 +31,7 @@ struct ice_dpll_pin {
 	u8 state[ICE_DPLL_RCLK_NUM_MAX];
 	struct dpll_pin_properties prop;
 	u32 freq;
+	s32 phase_adjust;
 };
 
 /** ice_dpll - store info required for DPLL control
@@ -40,7 +42,8 @@ struct ice_dpll_pin {
  * @prev_input_idx: previously selected input index
  * @ref_state: state of dpll reference signals
  * @eec_mode: eec_mode dpll is configured for
- * @phase_shift: phase shift delay of a dpll
+ * @phase_offset: phase offset of active pin vs dpll signal
+ * @prev_phase_offset: previous phase offset of active pin vs dpll signal
  * @input_prio: priorities of each input
  * @dpll_state: current dpll sync state
  * @prev_dpll_state: last dpll sync state
@@ -55,7 +58,8 @@ struct ice_dpll {
 	u8 prev_input_idx;
 	u8 ref_state;
 	u8 eec_mode;
-	s64 phase_shift;
+	s64 phase_offset;
+	s64 prev_phase_offset;
 	u8 *input_prio;
 	enum dpll_lock_status dpll_state;
 	enum dpll_lock_status prev_dpll_state;
@@ -78,6 +82,8 @@ struct ice_dpll {
  * @cgu_state_acq_err_num: number of errors returned during periodic work
  * @base_rclk_idx: idx of first pin used for clock revocery pins
  * @clock_id: clock_id of dplls
+ * @input_phase_adj_max: max phase adjust value for an input pins
+ * @output_phase_adj_max: max phase adjust value for an output pins
  */
 struct ice_dplls {
 	struct kthread_worker *kworker;
diff --git a/include/linux/dpll.h b/include/linux/dpll.h
index bbc480cd2932..578fc5fa3750 100644
--- a/include/linux/dpll.h
+++ b/include/linux/dpll.h
@@ -68,6 +68,18 @@ struct dpll_pin_ops {
 	int (*prio_set)(const struct dpll_pin *pin, void *pin_priv,
 			const struct dpll_device *dpll, void *dpll_priv,
 			const u32 prio, struct netlink_ext_ack *extack);
+	int (*phase_offset_get)(const struct dpll_pin *pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				s64 *phase_offset,
+				struct netlink_ext_ack *extack);
+	int (*phase_adjust_get)(const struct dpll_pin *pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				s32 *phase_adjust,
+				struct netlink_ext_ack *extack);
+	int (*phase_adjust_set)(const struct dpll_pin *pin, void *pin_priv,
+				const struct dpll_device *dpll, void *dpll_priv,
+				const s32 phase_adjust,
+				struct netlink_ext_ack *extack);
 };
 
 struct dpll_pin_frequency {
@@ -91,6 +103,11 @@ struct dpll_pin_frequency {
 #define DPLL_PIN_FREQUENCY_DCF77 \
 	DPLL_PIN_FREQUENCY(DPLL_PIN_FREQUENCY_77_5_KHZ)
 
+struct dpll_pin_phase_adjust_range {
+	s32 min;
+	s32 max;
+};
+
 struct dpll_pin_properties {
 	const char *board_label;
 	const char *panel_label;
@@ -99,6 +116,7 @@ struct dpll_pin_properties {
 	unsigned long capabilities;
 	u32 freq_supported_num;
 	struct dpll_pin_frequency *freq_supported;
+	struct dpll_pin_phase_adjust_range phase_range;
 };
 
 #if IS_ENABLED(CONFIG_DPLL)
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index 20ef0718f8dc..715a491d2727 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -138,6 +138,8 @@ enum dpll_pin_capabilities {
 	DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
 };
 
+#define DPLL_PHASE_OFFSET_DIVIDER	1000
+
 enum dpll_a {
 	DPLL_A_ID = 1,
 	DPLL_A_MODULE_NAME,
@@ -173,6 +175,10 @@ enum dpll_a_pin {
 	DPLL_A_PIN_CAPABILITIES,
 	DPLL_A_PIN_PARENT_DEVICE,
 	DPLL_A_PIN_PARENT_PIN,
+	DPLL_A_PIN_PHASE_ADJUST_MIN,
+	DPLL_A_PIN_PHASE_ADJUST_MAX,
+	DPLL_A_PIN_PHASE_ADJUST,
+	DPLL_A_PIN_PHASE_OFFSET,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)