diff options
author | Gwendal Grignou <gwendal@chromium.org> | 2022-01-01 23:38:15 +0300 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2022-01-23 21:03:33 +0300 |
commit | 4c18a890dff8d95ca234d184773910383a978d45 (patch) | |
tree | b6ad275fa7f79c25330c153afc1a096293c99622 /Documentation/ABI/testing/sysfs-bus-iio-sx9324 | |
parent | caa8ce7f6149576efc3a1af06d2c03e41cb6c46e (diff) | |
download | linux-4c18a890dff8d95ca234d184773910383a978d45.tar.xz |
iio:proximity:sx9324: Add SX9324 support
Semtech SAR sensor SX9324 is an evolution of the SX9310:
It has 4 phases that can be configured to capture and process data
from any of 3 CS pins and provide independent detection:
proximity, table proximity or body proximity.
Gather antenna data:
echo sx9324-dev3 > trigger/current_trigger
echo 1 > scan_elements/in_proximity0_en
echo 1 > buffer/enable
od -v -An --endian=big -t d2 -w2 /dev/iio\:device3
(at 10Hz, the default).
Trigger events:
Setting:
thresh_falling_period: 2 (events)
thresh_rising_period: 2 (events)
in_proximity0_thresh_either_value: 300
in_proximity0_thresh_either_hysteresis: 72
using iio_event_monitor /dev/iio\:deviceX, approaching my hand to the
antenna pad, I see:
...
Event: time: 1634763907532035297, type: proximity, channel: 0, evtype:
thresh, direction: falling
Event: time: 1634763910138104640, type: proximity, channel: 0, evtype:
thresh, direction: rising
...
Datasheet: https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-4-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio-sx9324')
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-sx9324 | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9324 b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 new file mode 100644 index 000000000000..632e3321f5a3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9324 @@ -0,0 +1,28 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup +Date: November 2021 +KernelVersion: 5.17 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout + defines if the input is + + not connected (HZ), + + grounded (GD), + + connected to an antenna where it can act as a base + (DS - data shield), or measured input (MI). + + The sensor rotates measurement across 4 phases + (PH0, PH1, PH2, PH3), where the inputs are configured + and then measured. + + By default, during the first phase, [PH0], CS0 is measured, + while CS1 and CS2 are used as shields. + `cat in_proximity0_setup` returns "MI,DS,DS". + [PH1], CS1 is measured, CS0 and CS2 are shield: + `cat in_proximity1_setup` returns "DS,MI,DS". + [PH2], CS2 is measured, CS0 and CS1 are shield: + `cat in_proximity1_setup` returns "DS,DS,MI". + [PH3], CS1 and CS2 are measured (combo mode): + `cat in_proximity1_setup` returns "DS,MI,MI". + + Note, these are the chip default. Hardware layout will most + likely dictate different output. The entry is read-only. |