diff options
| author | Bjorn Helgaas <bhelgaas@google.com> | 2023-08-15 00:28:21 +0300 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2023-08-18 19:32:25 +0300 |
| commit | 47aab53331effedd3f5a6136854bd1da011f94b6 (patch) | |
| tree | 97a28f7bbcbf3f908494643bd685d4cbc626bc08 /Documentation/devicetree/bindings/spi | |
| parent | de259b7bd6bee317c8ae9e6324be6fd3b89e1930 (diff) | |
| download | linux-47aab53331effedd3f5a6136854bd1da011f94b6.tar.xz | |
dt-bindings: Fix typos
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
3 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt index 9887b0724759..d7668f41b03b 100644 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt @@ -1,4 +1,4 @@ -Broadcom BCM2835 auxiliar SPI1/2 controller +Broadcom BCM2835 auxiliary SPI1/2 controller The BCM2835 contains two forms of SPI master controller, one known simply as SPI0, and the other known as the "Universal SPI Master"; part of the @@ -9,7 +9,7 @@ Required properties: - reg: Should contain register location and length for the spi block - interrupts: Should contain shared interrupt of the aux block - clocks: The clock feeding the SPI controller - needs to - point to the auxiliar clock driver of the bcm2835, + point to the auxiliary clock driver of the bcm2835, as this clock will enable the output gate for the specific clock. - cs-gpios: the cs-gpios (native cs is NOT supported) diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 28222aae3077..45975f40d943 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -12,7 +12,7 @@ maintainers: description: | The Broadcom SPI controller is a SPI master found on various SOCs, including - BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits + BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists of: MSPI : SPI master controller can read and write to a SPI slave device BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration @@ -20,7 +20,7 @@ description: | io with 3-byte and 4-byte addressing support. Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP. - MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance + MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance of a MSPI master without the BSPI to use with non flash slave devices that use SPI protocol. diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml index 352affa4b7f8..ff4d361707bd 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.yaml +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -68,7 +68,7 @@ properties: dma-names: description: List of DMA request names. These strings correspond 1:1 with - the DMA sepecifiers listed in dmas. The string names is to be + the DMA specifiers listed in dmas. The string names is to be "rxN" and "txN" for RX and TX requests, respectively. Where N is the chip select number. minItems: 1 |