Documentation: networking: correct spelling

Correct spelling problems for Documentation/networking/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

11 files changed, 15 insertions, 15 deletions

diff --git a/Documentation/networking/device_drivers/atm/iphase.rst b/Documentation/networking/device_drivers/atm/iphase.rst
index 92d9b757d75a..388c7101e2cb 100644
--- a/Documentation/networking/device_drivers/atm/iphase.rst
+++ b/Documentation/networking/device_drivers/atm/iphase.rst
@@ -4,7 +4,7 @@
 ATM (i)Chip IA Linux Driver Source
 ==================================
 
-			      READ ME FISRT
+			      READ ME FIRST
 
 --------------------------------------------------------------------------------
 
diff --git a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
index 40c92ea272af..1a4fc6607582 100644
--- a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
+++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst
@@ -577,7 +577,7 @@ CTU CAN FD IP Core and Driver Development Acknowledgment
 
   * Linux driver development
   * continuous integration platform architect and GHDL updates
-  * theses `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_
+  * thesis `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_
 
 * Jiri Novak <jnovak@fel.cvut.cz>
 
@@ -603,7 +603,7 @@ CTU CAN FD IP Core and Driver Development Acknowledgment
 * Jan Charvat
 
  * implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst <https://www.qemu.org/docs/master/system/devices/can.html>`_)
- * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator
+ * Bachelor thesis Model of CAN FD Communication Controller for QEMU Emulator
 
 Notes
 -----
diff --git a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
index b371650788f4..381323423b4c 100644
--- a/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
+++ b/Documentation/networking/device_drivers/can/ctu/fsm_txt_buffer_user.svg
@@ -129,10 +129,10 @@
    </g>
   </g>
   <text transform="matrix(.264583 0 0 .264583 91.8919 139.964)" x="26.959213" y="9.11724" fill="#2aa1ff" filter="url(#filter1204-6-2-9-1-3-1)" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="26.959213" y="9.11724" text-align="center">Set</tspan><tspan x="26.959213" y="22.31724" text-align="center">abort</tspan></text>
-  <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccesfull</tspan></text>
+  <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccessful</tspan></text>
   <g font-size="12px" stroke-width="3.77953" text-anchor="middle">
    <text transform="matrix(.264583 0 0 .264583 68.5988 118.913)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">starts</tspan></text>
-   <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">succesfull</tspan></text>
+   <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">successful</tspan></text>
    <text transform="matrix(.264583 0 0 .264583 107.77 145.476)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">sborted</tspan></text>
   </g>
   <g stroke-width="3.77953" text-anchor="middle">
diff --git a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
index e89e4192af88..a060f84c4f96 100644
--- a/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
+++ b/Documentation/networking/device_drivers/ethernet/3com/vortex.rst
@@ -254,7 +254,7 @@ Media selection
 A number of the older NICs such as the 3c590 and 3c900 series have
 10base2 and AUI interfaces.
 
-Prior to January, 2001 this driver would autoeselect the 10base2 or AUI
+Prior to January, 2001 this driver would autoselect the 10base2 or AUI
 port if it didn't detect activity on the 10baseT port.  It would then
 get stuck on the 10base2 port and a driver reload was necessary to
 switch back to 10baseT.  This behaviour could not be prevented with a
diff --git a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
index 595ddef1c8b3..099280a261be 100644
--- a/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
+++ b/Documentation/networking/device_drivers/ethernet/aquantia/atlantic.rst
@@ -270,7 +270,7 @@ RX flow rules (ntuple filters)
 
     ethtool -K ethX ntuple <on|off>
 
- When disabling ntuple filters, all the user programed filters are
+ When disabling ntuple filters, all the user programmed filters are
  flushed from the driver cache and hardware. All needed filters must
  be re-added when ntuple is re-enabled.
 
@@ -418,7 +418,7 @@ Default value: 0xFFFF
 0        Disable interrupt throttling.
 1        Enable interrupt throttling and use specified tx and rx rates.
 0xFFFF   Auto throttling mode. Driver will choose the best RX and TX
-	 interrupt throtting settings based on link speed.
+	 interrupt throttling settings based on link speed.
 ======   ==============================================================
 
 aq_itr_tx - TX interrupt throttle rate
@@ -456,7 +456,7 @@ AQ_CFG_RX_PAGEORDER
 
 Default value: 0
 
-RX page order override. Thats a power of 2 number of RX pages allocated for
+RX page order override. That's a power of 2 number of RX pages allocated for
 each descriptor. Received descriptor size is still limited by
 AQ_CFG_RX_FRAME_MAX.
 
diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
index 1d2f55feca24..e2a36d0d88ef 100644
--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
@@ -11,7 +11,7 @@ Overview
 --------
 
 The DPAA2 MAC / PHY support consists of a set of APIs that help DPAA2 network
-drivers (dpaa2-eth, dpaa2-ethsw) interract with the PHY library.
+drivers (dpaa2-eth, dpaa2-ethsw) interact with the PHY library.
 
 DPAA2 Software Architecture
 ---------------------------
diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
index dd5cd69467be..5ba9015336e2 100644
--- a/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
@@ -127,7 +127,7 @@ Type1:
 Type2:
  - RVU PF0 ie admin function creates these VFs and maps them to loopback block's channels.
  - A set of two VFs (VF0 & VF1, VF2 & VF3 .. so on) works as a pair ie pkts sent out of
-   VF0 will be received by VF1 and viceversa.
+   VF0 will be received by VF1 and vice versa.
  - These VFs can be used by applications or virtual machines to communicate between them
    without sending traffic outside. There is no switch present in HW, hence the support
    for loopback VFs.
diff --git a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
index 0eabbc347d6c..6ec7d686efab 100644
--- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
@@ -83,7 +83,7 @@ Configuring the Driver
 MTU
 ---
 
-Jumbo frame support is available with a maximim size of 9194 bytes.
+Jumbo frame support is available with a maximum size of 9194 bytes.
 
 Interrupt coalescing
 --------------------
diff --git a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
index f24adfab6a1b..25fd9aa284e2 100644
--- a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
@@ -124,7 +124,7 @@ Multicast flooding
 ==================
 CPU port mcast_flooding is always on
 
-Turning flooding on/off on swithch ports:
+Turning flooding on/off on switch ports:
 bridge link set dev sw0p1 mcast_flood on/off
 
 Access and Trunk port
diff --git a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
index 1241ecac73bd..464dce938ed1 100644
--- a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
@@ -174,7 +174,7 @@ Multicast flooding
 ==================
 CPU port mcast_flooding is always on
 
-Turning flooding on/off on swithch ports:
+Turning flooding on/off on switch ports:
 bridge link set dev sw0p1 mcast_flood on/off
 
 Access and Trunk port
diff --git a/Documentation/networking/device_drivers/wwan/iosm.rst b/Documentation/networking/device_drivers/wwan/iosm.rst
index aceb0223eb46..6f9e955af984 100644
--- a/Documentation/networking/device_drivers/wwan/iosm.rst
+++ b/Documentation/networking/device_drivers/wwan/iosm.rst
@@ -69,7 +69,7 @@ wwan0-X network device
 The IOSM driver exposes IP link interface "wwan0-X" of type "wwan" for IP
 traffic. Iproute network utility is used for creating "wwan0-X" network
 interface and for associating it with MBIM IP session. The Driver supports
-upto 8 IP sessions for simultaneous IP communication.
+up to 8 IP sessions for simultaneous IP communication.
 
 The userspace management application is responsible for creating new IP link
 prior to establishing MBIM IP session where the SessionId is greater than 0.