summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2014-09-30 14:16:25 +0400
committerLinus Walleij <linus.walleij@linaro.org>2014-10-20 11:08:26 +0400
commit1637d480f873ca305f7f090e3b3bc92430b5892f (patch)
treec254049d778fe41f11b35623561173873c6a1177 /arch/arm/boot/dts/ste-href-tvk1281618.dtsi
parent51d39936acba666774b596829277db3e13e5e970 (diff)
downloadlinux-1637d480f873ca305f7f090e3b3bc92430b5892f.tar.xz
pinctrl: nomadik: force-convert to generic config bindings
This converts the Nomadik pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-href-tvk1281618.dtsi')
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi12
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 18b65d1b14f2..062c6aae3afa 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -130,7 +130,7 @@
tc35893 {
tc35893_tvk_mode: tc35893_tvk {
tvk_cfg {
- ste,pins = "GPIO218_AH11";
+ pins = "GPIO218_AH11";
ste,config = <&gpio_in_pu>;
};
};
@@ -138,7 +138,7 @@
prox {
prox_tvk_mode: prox_tvk {
tvk_cfg {
- ste,pins = "GPIO217_AH12";
+ pins = "GPIO217_AH12";
ste,config = <&gpio_in_pu>;
};
};
@@ -146,7 +146,7 @@
hall {
hall_tvk_mode: hall_tvk {
tvk_cfg {
- ste,pins = "GPIO145_C13";
+ pins = "GPIO145_C13";
ste,config = <&gpio_in_pu>;
};
};
@@ -155,7 +155,7 @@
accel_tvk_mode: accel_tvk {
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
- ste,pins = "GPIO82_C1", "GPIO83_D3";
+ pins = "GPIO82_C1", "GPIO83_D3";
ste,config = <&gpio_in_pu>;
};
};
@@ -164,11 +164,11 @@
magneto_tvk_mode: magneto_tvk {
/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
tvk_cfg1 {
- ste,pins = "GPIO31_V3";
+ pins = "GPIO31_V3";
ste,config = <&gpio_in_pu>;
};
tvk_cfg2 {
- ste,pins = "GPIO32_V2";
+ pins = "GPIO32_V2";
ste,config = <&gpio_in_pd>;
};
};