ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 836 deletions

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
deleted file mode 100644
index 56952333ae28..000000000000
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ /dev/null
@@ -1,836 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include "tegra124.dtsi"
-
-/ {
-	aliases {
-		rtc0 = "/i2c@7000d000/pmic@40";
-		rtc1 = "/rtc@7000e000";
-		serial0 = &uarta;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/*
-	 * Note that recent version of the device tree compiler (starting with
-	 * version 1.4.2) warn about this node containing a reg property, but
-	 * missing a unit-address. However, the bootloader on these Chromebook
-	 * devices relies on the full name of this node to be exactly /memory.
-	 * Adding the unit-address causes the bootloader to create a /memory
-	 * node and write the memory bank configuration to that node, which in
-	 * turn leads the kernel to believe that the device has 2 GiB of
-	 * memory instead of the amount detected by the bootloader.
-	 *
-	 * The name of this node is effectively ABI and must not be changed.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	/delete-node/ memory@80000000;
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_3v3_hdmi>;
-			pll-supply = <&vdd_hdmi_pll>;
-			hdmi-supply = <&vdd_5v0_hdmi>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		sor@54540000 {
-			status = "okay";
-
-			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
-			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
-
-			nvidia,dpaux = <&dpaux>;
-			nvidia,panel = <&panel>;
-		};
-
-		dpaux@545c0000 {
-			vdd-supply = <&vdd_3v3_panel>;
-			status = "okay";
-		};
-	};
-
-	gpu@57000000 {
-		status = "okay";
-
-		vdd-supply = <&vdd_gpu>;
-	};
-
-	serial@70006000 {
-		/* Debug connector on the bottom of the board near SD card. */
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		acodec: audio-codec@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
-		};
-
-		tmp451: temperature-sensor@4c {
-			compatible = "ti,tmp451";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
-
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		trackpad@15 {
-			compatible = "elan,ekth3000";
-			reg = <0x15>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		tpm@20 {
-			compatible = "infineon,slb9645tt";
-			reg = <0x20>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@40 {
-			compatible = "ams,as3722";
-			reg = <0x40>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ams,system-power-controller;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&as3722_default>;
-
-			as3722_default: pinmux {
-				gpio0 {
-					pins = "gpio0";
-					function = "gpio";
-					bias-pull-down;
-				};
-
-				gpio1 {
-					pins = "gpio1";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio2_4_7 {
-					pins = "gpio2", "gpio4", "gpio7";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio3_6 {
-					pins = "gpio3", "gpio6";
-					bias-high-impedance;
-				};
-
-				gpio5 {
-					pins = "gpio5";
-					function = "clk32k-out";
-					bias-pull-down;
-				};
-			};
-
-			regulators {
-				vsup-sd2-supply = <&vdd_5v0_sys>;
-				vsup-sd3-supply = <&vdd_5v0_sys>;
-				vsup-sd4-supply = <&vdd_5v0_sys>;
-				vsup-sd5-supply = <&vdd_5v0_sys>;
-				vin-ldo0-supply = <&vdd_1v35_lp0>;
-				vin-ldo1-6-supply = <&vdd_3v3_run>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&vdd_3v3_sys>;
-				vin-ldo9-10-supply = <&vdd_5v0_sys>;
-				vin-ldo11-supply = <&vdd_3v3_run>;
-
-				vdd_cpu: sd0 {
-					regulator-name = "+VDD_CPU_AP";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <2>;
-				};
-
-				sd1 {
-					regulator-name = "+VDD_CORE";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <2500000>;
-					regulator-max-microamp = <4000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <1>;
-				};
-
-				vdd_1v35_lp0: sd2 {
-					regulator-name = "+1.35V_LP0(sd2)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				sd3 {
-					regulator-name = "+1.35V_LP0(sd3)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v05_run: sd4 {
-					regulator-name = "+1.05V_RUN";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				vddio_1v8: sd5 {
-					regulator-name = "+1.8V_VDDIO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				vdd_gpu: sd6 {
-					regulator-name = "+VDD_GPU_AP";
-					regulator-min-microvolt = <650000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				avdd_1v05_run: ldo0 {
-					regulator-name = "+1.05V_RUN_AVDD";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,ext-control = <1>;
-				};
-
-				ldo1 {
-					regulator-name = "+1.8V_RUN_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2V_GEN_AVDD";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "+1.00V_LP0_VDD_RTC";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,enable-tracking;
-				};
-
-				vdd_run_cam: ldo4 {
-					regulator-name = "+3.3V_RUN_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5 {
-					regulator-name = "+1.2V_RUN_CAM_FRONT";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				vddio_sdmmc3: ldo6 {
-					regulator-name = "+VDDIO_SDMMC3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7 {
-					regulator-name = "+1.05V_RUN_CAM_REAR";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo9 {
-					regulator-name = "+2.8V_RUN_TOUCH";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "+2.8V_RUN_CAM_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo11 {
-					regulator-name = "+1.8V_RUN_VPP_FUSE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
-		};
-	};
-
-	spi@7000d400 {
-		status = "okay";
-
-		cros_ec: cros-ec@0 {
-			compatible = "google,cros-ec-spi";
-			spi-max-frequency = <3000000>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
-			reg = <0>;
-
-			google,cros-ec-spi-msg-delay = <2000>;
-
-			i2c-tunnel {
-				compatible = "google,cros-ec-i2c-tunnel";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				google,remote-bus = <0>;
-
-				charger: bq24735@9 {
-					compatible = "ti,bq24735";
-					reg = <0x9>;
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(J, 0)
-							IRQ_TYPE_EDGE_BOTH>;
-					ti,ac-detect-gpios = <&gpio
-							TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
-					ti,external-control;
-				};
-
-				battery: sbs-battery@b {
-					compatible = "sbs,sbs-battery";
-					reg = <0xb>;
-					sbs,i2c-retry-count = <2>;
-					sbs,poll-retry-count = <10>;
-					power-supplies = <&charger>;
-				};
-			};
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-
-		flash@0 {
-			compatible = "winbond,w25q32dw", "jedec,spi-nor";
-			spi-max-frequency = <25000000>;
-			reg = <0>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <0>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	cec@70015000 {
-		status = "okay";
-	};
-
-	hda@70030000 {
-		status = "okay";
-	};
-
-	usb@70090000 {
-		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
-		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
-
-		avddio-pex-supply = <&vdd_1v05_run>;
-		dvddio-pex-supply = <&vdd_1v05_run>;
-		avdd-usb-supply = <&vdd_3v3_lp0>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-pll-erefe-supply = <&avdd_1v05_run>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
-		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
-
-		status = "okay";
-	};
-
-	padctl@7009f000 {
-		status = "okay";
-
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-pll-erefe-supply = <&avdd_1v05_run>;
-		avdd-pex-pll-supply = <&vdd_1v05_run>;
-		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
-
-		pads {
-			usb2 {
-				status = "okay";
-
-				lanes {
-					usb2-0 {
-						nvidia,function = "xusb";
-						status = "okay";
-					};
-
-					usb2-1 {
-						nvidia,function = "xusb";
-						status = "okay";
-					};
-
-					usb2-2 {
-						nvidia,function = "xusb";
-						status = "okay";
-					};
-				};
-			};
-
-			pcie {
-				status = "okay";
-
-				lanes {
-					pcie-0 {
-						nvidia,function = "usb3-ss";
-						status = "okay";
-					};
-
-					pcie-1 {
-						nvidia,function = "usb3-ss";
-						status = "okay";
-					};
-				};
-			};
-		};
-
-		ports {
-			usb2-0 {
-				vbus-supply = <&vdd_usb1_vbus>;
-				status = "okay";
-				mode = "otg";
-				usb-role-switch;
-			};
-
-			usb2-1 {
-				vbus-supply = <&vdd_run_cam>;
-				status = "okay";
-				mode = "host";
-			};
-
-			usb2-2 {
-				vbus-supply = <&vdd_usb3_vbus>;
-				status = "okay";
-				mode = "host";
-			};
-
-			usb3-0 {
-				nvidia,usb2-companion = <0>;
-				status = "okay";
-			};
-
-			usb3-1 {
-				nvidia,usb2-companion = <1>;
-				status = "okay";
-			};
-		};
-	};
-
-	mmc@700b0000 { /* WiFi/BT on this bus */
-		status = "okay";
-		bus-width = <4>;
-		no-1-8-v;
-		non-removable;
-		mmc-pwrseq = <&sdhci0_pwrseq>;
-		vmmc-supply = <&vdd_3v3_lp0>;
-		vqmmc-supply = <&vddio_1v8>;
-		keep-power-in-suspend;
-	};
-
-	mmc@700b0400 { /* SD Card on this bus */
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		no-1-8-v;
-		vqmmc-supply = <&vddio_sdmmc3>;
-	};
-
-	mmc@700b0600 { /* eMMC on this bus */
-		status = "okay";
-		bus-width = <8>;
-		no-1-8-v;
-		non-removable;
-	};
-
-	/* CPU DFLL clock */
-	clock@70110000 {
-		status = "okay";
-		vdd-cpu-supply = <&vdd_cpu>;
-		nvidia,i2c-fs-rate = <400000>;
-	};
-
-	ahub@70300000 {
-		i2s@70301100 {
-			status = "okay";
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_led>;
-		pwms = <&pwm 1 1000000>;
-
-		default-brightness-level = <224>;
-		brightness-levels =
-			<  0   1   2   3   4   5   6   7
-			   8   9  10  11  12  13  14  15
-			  16  17  18  19  20  21  22  23
-			  24  25  26  27  28  29  30  31
-			  32  33  34  35  36  37  38  39
-			  40  41  42  43  44  45  46  47
-			  48  49  50  51  52  53  54  55
-			  56  57  58  59  60  61  62  63
-			  64  65  66  67  68  69  70  71
-			  72  73  74  75  76  77  78  79
-			  80  81  82  83  84  85  86  87
-			  88  89  90  91  92  93  94  95
-			  96  97  98  99 100 101 102 103
-			 104 105 106 107 108 109 110 111
-			 112 113 114 115 116 117 118 119
-			 120 121 122 123 124 125 126 127
-			 128 129 130 131 132 133 134 135
-			 136 137 138 139 140 141 142 143
-			 144 145 146 147 148 149 150 151
-			 152 153 154 155 156 157 158 159
-			 160 161 162 163 164 165 166 167
-			 168 169 170 171 172 173 174 175
-			 176 177 178 179 180 181 182 183
-			 184 185 186 187 188 189 190 191
-			 192 193 194 195 196 197 198 199
-			 200 201 202 203 204 205 206 207
-			 208 209 210 211 212 213 214 215
-			 216 217 218 219 220 221 222 223
-			 224 225 226 227 228 229 230 231
-			 232 233 234 235 236 237 238 239
-			 240 241 242 243 244 245 246 247
-			 248 249 250 251 252 253 254 255
-			 256>;
-	};
-
-	clk32k_in: clock-32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			#cooling-cells = <2>;
-			vdd-cpu-supply = <&vdd_cpu>;
-		};
-
-		cpu1: cpu@1 {
-			#cooling-cells = <2>;
-		};
-
-		cpu2: cpu@2 {
-			#cooling-cells = <2>;
-		};
-
-		cpu3: cpu@3 {
-			#cooling-cells = <2>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <30>;
-			wakeup-source;
-		};
-
-		switch-lid {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>;
-			linux,code = <KEY_RESERVED>;
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		priority = <200>;
-	};
-
-	sdhci0_pwrseq: pwrseq-sdhci0 {
-		compatible = "mmc-pwrseq-simple";
-
-		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
-	vdd_mux: regulator-mux {
-		compatible = "regulator-fixed";
-		regulator-name = "+VDD_MUX";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_5v0_sys: regulator-5v0sys {
-		compatible = "regulator-fixed";
-		regulator-name = "+5V_SYS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_mux>;
-	};
-
-	vdd_3v3_sys: regulator-3v3sys {
-		compatible = "regulator-fixed";
-		regulator-name = "+3.3V_SYS";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_mux>;
-	};
-
-	vdd_3v3_run: regulator-3v3run {
-		compatible = "regulator-fixed";
-		regulator-name = "+3.3V_RUN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_3v3_sys>;
-	};
-
-	vdd_3v3_hdmi: regulator-3v3hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vdd_3v3_run>;
-	};
-
-	vdd_led: regulator-led {
-		compatible = "regulator-fixed";
-		regulator-name = "+VDD_LED";
-		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_mux>;
-	};
-
-	vdd_5v0_ts: regulator-ts {
-		compatible = "regulator-fixed";
-		regulator-name = "+5V_VDD_TS_SW";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_usb1_vbus: regulator-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "+5V_USB_HS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		gpio-open-drain;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_usb3_vbus: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+5V_USB_SS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		gpio-open-drain;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_3v3_panel: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "+3.3V_PANEL";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_3v3_run>;
-	};
-
-	vdd_3v3_lp0: regulator-lp0 {
-		compatible = "regulator-fixed";
-		regulator-name = "+3.3V_LP0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/*
-		 * TODO: find a way to wire this up with the USB EHCI
-		 * controllers so that it can be enabled on demand.
-		 */
-		regulator-always-on;
-		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_3v3_sys>;
-	};
-
-	vdd_hdmi_pll: regulator-hdmipll {
-		compatible = "regulator-fixed";
-		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-		regulator-min-microvolt = <1050000>;
-		regulator-max-microvolt = <1050000>;
-		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-		vin-supply = <&vdd_1v05_run>;
-	};
-
-	vdd_5v0_hdmi: regulator-hdmicon {
-		compatible = "regulator-fixed";
-		regulator-name = "+5V_HDMI_CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	sound {
-		nvidia,audio-routing =
-			"Headphones", "HPR",
-			"Headphones", "HPL",
-			"Speakers", "SPKR",
-			"Speakers", "SPKL",
-			"Mic Jack", "MICBIAS",
-			"DMICL", "Int Mic",
-			"DMICR", "Int Mic",
-			"IN34", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&acodec>;
-
-		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-
-		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
-				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
-
-		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-					 <&tegra_car TEGRA124_CLK_EXTERN1>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
-		nvidia,mic-det-gpios =
-				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-	};
-
-	thermal-zones {
-		cpu-skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&tmp451 0>;
-
-			trips {
-				cpu_passive_trip: cpu-alert0 {
-					/* throttle at 70C until temperature drops to 69.8C */
-					temperature = <70000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_passive_trip>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-};
-
-#include "cros-ec-keyboard.dtsi"