summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mvebu/kirkwood.c
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2014-02-22 23:14:57 +0400
committerJason Cooper <jason@lakedaemon.net>2014-02-23 01:19:55 +0400
commitba5a37e52194294d60e3d902a05c4471a93dbdee (patch)
tree52860d2ca5e250999a464c35e531603140dacb62 /arch/arm/mach-mvebu/kirkwood.c
parentadc00979a8880a3616d075766188d5dd7e98bb22 (diff)
downloadlinux-ba5a37e52194294d60e3d902a05c4471a93dbdee.tar.xz
ARM: mvebu: Move kirkwood DT boards into mach-mvebu
Move the kirkwood DT support into mach-mvebu, and make them part of ARCH_MULTI_V5. Minimal changes have been made in order to make it boot. Cleanup of the header files and integration with mvebu will take place in following patches. In order to help Debian transition between mach-kirkwood and mach-mvebu, the DTS files are compiled for both, allowing Debian to continue using mach-kirkwood until all remaining boards are supported by mach-mvebu. Debian is then expected to simply swap from mach-kirkwood to mach-mvebu and mach-kirkwood will be removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm/mach-mvebu/kirkwood.c')
-rw-r--r--arch/arm/mach-mvebu/kirkwood.c209
1 files changed, 209 insertions, 0 deletions
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 000000000000..6e754a38f418
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
+#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
+#include <plat/common.h>
+#include <plat/pcie.h>
+#include "kirkwood-pm.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_disable_mbus_error_propagation();
+
+ BUG_ON(mvebu_mbus_dt_init());
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
+ kirkwood_cpufreq_init();
+ kirkwood_cpuidle_init();
+
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+ "marvell,kirkwood",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+ .init_machine = kirkwood_dt_init,
+ .restart = kirkwood_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END