diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2023-04-19 22:15:53 +0300 |
|---|---|---|
| committer | Matthias Brugger <matthias.bgg@gmail.com> | 2023-05-29 17:23:03 +0300 |
| commit | d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f (patch) | |
| tree | 43cab3de9e9070b946267a17319412ae82666c43 /arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | |
| parent | 5a65dcccf483c59bf87beadbf64196b4faa2b993 (diff) | |
| download | linux-d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f.tar.xz | |
arm64: dts: mt7622: declare SPI-NAND present on BPI-R64
The SPI-NOR node in the device tree of the BananaPi R64 has most likely
been copied from the reference board's device tree even though the R64
comes with an SPI-NAND chip rather than SPI-NOR.
Setup the Serial NAND Flash Interface (SNFI) controller, enable
hardware BCH error detection and correction engine and add the SPI-NAND
chip including basic partitions,
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZEA96dmaXqTpk8u8@makrotopia.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Diffstat (limited to 'arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 38 |
1 files changed, 33 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index af3fe61e4093..a33359015200 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -248,14 +248,42 @@ status = "disabled"; }; -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; +&bch { + status = "okay"; +}; +&snfi { + pinctrl-names = "default"; + pinctrl-0 = <&serial_nand_pins>; + status = "okay"; flash@0 { - compatible = "jedec,spi-nor"; + compatible = "spi-nand"; reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + nand-ecc-engine = <&snfi>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "fip"; + reg = <0x80000 0x200000>; + read-only; + }; + + ubi: partition@280000 { + label = "ubi"; + reg = <0x280000 0x7d80000>; + }; + }; }; }; |