Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes

Qualcomm ARM64 Devicetree fixes for v6.3

This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.

The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.

The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.

Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.

SPI5 was accidentally enabled by default on SM6115, and is disabled
again.

CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.

The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.

Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.

The UFS controller is marked cache coherent on SM8350 and SM8450.

The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.

The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.

* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
  arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
  arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
  arm64: dts: qcom: sc8280xp: fix rx frame shapping info
  arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
  arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
  arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
  arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
  arm64: dts: qcom: sm8550: Use correct CPU compatibles
  arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
  arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
  ...

Link: https://lore.kernel.org/r/20230323141642.1085684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 9 insertions, 9 deletions

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 0d02599d8867..42bfa9fa5b96 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2504,12 +2504,12 @@
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2600,7 +2600,7 @@
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 			#sound-dai-cells = <1>;
@@ -2609,15 +2609,15 @@
 
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
-			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
-			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
 
 			status = "disabled";
 		};