diff options
author | Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> | 2022-10-10 14:44:13 +0300 |
---|---|---|
committer | Bjorn Andersson <andersson@kernel.org> | 2022-10-18 06:01:05 +0300 |
commit | 9905370560d9c29adc15f4937c5a0c0dac05f0b4 (patch) | |
tree | 289c77c5ab5a7f158848a2b883b3661c0a26ed63 /arch/arm64/boot/dts/qcom/sdm845-db845c.dts | |
parent | 780f836fe071a9e8703fe6a05ae00129acf83391 (diff) | |
download | linux-9905370560d9c29adc15f4937c5a0c0dac05f0b4.tar.xz |
arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf". Otherwise the PIN drive strength would not be applied.
Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-db845c.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 2110a5893149..8ee512056da6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1123,7 +1123,10 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi2_default { - drive-strength = <16>; + pinconf { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + drive-strength = <16>; + }; }; &qup_uart3_default{ |