Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

1 files changed, 62 insertions, 37 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index cb0245d2226d..06d48338c836 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -28,12 +28,19 @@
 		pwms = <&pwm0 0 740740 0>;
 	};
 
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
 	edp_panel: edp-panel {
 		compatible = "boe,nv140fhmn49";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_gpio>;
+		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
 		ports {
@@ -60,7 +67,7 @@
 	gpio-key-lid {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lidbtn_gpio>;
+		pinctrl-0 = <&lidbtn_pin>;
 
 		lid {
 			debounce-interval = <20>;
@@ -76,7 +83,7 @@
 	gpio-key-power {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_gpio>;
+		pinctrl-0 = <&pwrbtn_pin>;
 
 		power {
 			debounce-interval = <20>;
@@ -117,7 +124,7 @@
 		clocks = <&rk808 1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_gpio>;
+		pinctrl-0 = <&wifi_enable_h_pin>;
 		post-power-on-delay-ms = <100>;
 		power-off-delay-us = <500000>;
 
@@ -129,7 +136,7 @@
 	es8316-sound {
 		compatible = "simple-audio-card";
 		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_gpio>;
+		pinctrl-0 = <&hp_det_pin>;
 		simple-audio-card,name = "rockchip,es8316-codec";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,mclk-fs = <256>;
@@ -213,7 +220,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_5v_gpio>;
+		pinctrl-0 = <&pwr_5v_pin>;
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -270,7 +277,7 @@
 		enable-active-high;
 		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
 		regulator-name = "vcc3v0_sd";
 		regulator-always-on;
 		regulator-min-microvolt = <3000000>;
@@ -288,7 +295,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&lcdvcc_en_gpio>;
+		pinctrl-0 = <&lcdvcc_en_pin>;
 		regulator-name = "vcc3v3_panel";
 		regulator-always-on;
 		regulator-min-microvolt = <3300000>;
@@ -317,7 +324,7 @@
 		enable-active-high;
 		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
 		regulator-name = "vcc5v0_otg";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -336,7 +343,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
 		regulator-name = "vbus_5vout";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -368,7 +375,7 @@
 
 		/* Also triggered by USB charger */
 		pinctrl-names = "default";
-		pinctrl-0 = <&dc_det_gpio>;
+		pinctrl-0 = <&dc_det_pin>;
 	};
 };
 
@@ -447,7 +454,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l_gpio>;
+		pinctrl-0 = <&pmic_int_l_pin>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -627,7 +634,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-always-on;
 		regulator-boot-on;
@@ -646,7 +653,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-always-on;
 		regulator-boot-on;
@@ -693,7 +700,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int_gpio>;
+		pinctrl-0 = <&fusb0_int_pin>;
 		vbus-supply = <&vbus_typec>;
 
 		connector {
@@ -741,11 +748,29 @@
 			};
 		};
 	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
 };
 
 &i2s1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
 	rockchip,playback-channels = <8>;
 	status = "okay";
@@ -777,49 +802,49 @@
 
 &pinctrl {
 	buttons {
-		pwrbtn_gpio: pwrbtn-gpio {
+		pwrbtn_pin: pwrbtn-pin {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		lidbtn_gpio: lidbtn-gpio {
+		lidbtn_pin: lidbtn-pin {
 			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dc-charger {
-		dc_det_gpio: dc-det-gpio {
+		dc_det_pin: dc-det-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
-		hp_det_gpio: hp-det-gpio {
+		hp_det_pin: hp-det-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	fusb302x {
-		fusb0_int_gpio: fusb0-int-gpio {
+		fusb0_int_pin: fusb0-int-pin {
 			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	i2s1 {
-		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
 			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
 		};
 	};
 
 	lcd-panel {
-		lcdvcc_en_gpio: lcdvcc-en-gpio {
+		lcdvcc_en_pin: lcdvcc-en-pin {
 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		panel_en_gpio: panel-en-gpio {
+		panel_en_pin: panel-en-pin {
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
 			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
@@ -835,58 +860,58 @@
 	};
 
 	pmic {
-		pmic_int_l_gpio: pmic-int-l-gpio {
+		pmic_int_l_pin: pmic-int-l-pin {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	sdcard {
-		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 	};
 
 	sdio-pwrseq {
-		wifi_enable_h_gpio: wifi-enable-h-gpio {
+		wifi_enable_h_pin: wifi-enable-h-pin {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb-typec {
-		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
 			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb2 {
-		pwr_5v_gpio: pwr-5v-gpio {
+		pwr_5v_pin: pwr-5v-pin {
 			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	wireless-bluetooth {
-		bt_wake_gpio: bt-wake-gpio {
+		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_host_wake_gpio: bt-host-wake-gpio {
+		bt_host_wake_pin: bt-host-wake-pin {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_reset_gpio: bt-reset-gpio {
+		bt_reset_pin: bt-reset-pin {
 			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -1034,7 +1059,7 @@
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		max-speed = <1500000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&wifi_bat>;
 		vddio-supply = <&vcc_wl>;