diff options
| author | Nishanth Menon <nm@ti.com> | 2022-02-25 15:02:39 +0300 |
|---|---|---|
| committer | Nishanth Menon <nm@ti.com> | 2022-02-28 14:34:43 +0300 |
| commit | a033588ec66bffd6cb51f946b2e998a9f9bf598d (patch) | |
| tree | 6100c49c9439d3b906c4571d79bb97556d2142a7 /arch/arm64/boot/dts/ti/Makefile | |
| parent | f1d17330a5bedc16c6cd87f0e009dd74d96ab612 (diff) | |
| download | linux-a033588ec66bffd6cb51f946b2e998a9f9bf598d.tar.xz | |
arm64: dts: ti: Add support for AM62-SK
AM62 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM625 SoC. It supports the following interfaces:
* 2 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 HDMI Port with audio + x1 OLDI/LVDS Display interface for Dual Display
* x1 Headphone Jack
* x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port
* x1 UHS-1 capable µSD card slot
* 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837
* 512 Mbit OSPI flash
* x4 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
* 20-pin header for Programmable Realtime Unit (PRU) IO pins
* 15-pin CSI header
Add basic support for AM62-SK.
Schematics: https://www.ti.com/lit/zip/sprr448
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-6-vigneshr@ti.com
Diffstat (limited to 'arch/arm64/boot/dts/ti/Makefile')
| -rw-r--r-- | arch/arm64/boot/dts/ti/Makefile | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 90be511bc4d0..02e5d80344d0 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -21,3 +21,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb + +dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb |