diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/mips/sibyte/sb1250/irq.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/mips/sibyte/sb1250/irq.c')
-rw-r--r-- | arch/mips/sibyte/sb1250/irq.c | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c new file mode 100644 index 000000000000..2728abbc94d2 --- /dev/null +++ b/arch/mips/sibyte/sb1250/irq.c @@ -0,0 +1,431 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/kernel_stat.h> + +#include <asm/errno.h> +#include <asm/signal.h> +#include <asm/system.h> +#include <asm/ptrace.h> +#include <asm/io.h> + +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_uart.h> +#include <asm/sibyte/sb1250_scd.h> +#include <asm/sibyte/sb1250.h> + +/* + * These are the routines that handle all the low level interrupt stuff. + * Actions handled here are: initialization of the interrupt map, requesting of + * interrupt lines by handlers, dispatching if interrupts to handlers, probing + * for interrupt lines + */ + + +#define shutdown_sb1250_irq disable_sb1250_irq +static void end_sb1250_irq(unsigned int irq); +static void enable_sb1250_irq(unsigned int irq); +static void disable_sb1250_irq(unsigned int irq); +static unsigned int startup_sb1250_irq(unsigned int irq); +static void ack_sb1250_irq(unsigned int irq); +#ifdef CONFIG_SMP +static void sb1250_set_affinity(unsigned int irq, unsigned long mask); +#endif + +#ifdef CONFIG_SIBYTE_HAS_LDT +extern unsigned long ldt_eoi_space; +#endif + +#ifdef CONFIG_KGDB +static int kgdb_irq; + +/* Default to UART1 */ +int kgdb_port = 1; +#ifdef CONFIG_SIBYTE_SB1250_DUART +extern char sb1250_duart_present[]; +#endif +#endif + +static struct hw_interrupt_type sb1250_irq_type = { + "SB1250-IMR", + startup_sb1250_irq, + shutdown_sb1250_irq, + enable_sb1250_irq, + disable_sb1250_irq, + ack_sb1250_irq, + end_sb1250_irq, +#ifdef CONFIG_SMP + sb1250_set_affinity +#else + NULL +#endif +}; + +/* Store the CPU id (not the logical number) */ +int sb1250_irq_owner[SB1250_NR_IRQS]; + +DEFINE_SPINLOCK(sb1250_imr_lock); + +void sb1250_mask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints |= (((u64) 1) << irq); + __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +void sb1250_unmask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +#ifdef CONFIG_SMP +static void sb1250_set_affinity(unsigned int irq, unsigned long mask) +{ + int i = 0, old_cpu, cpu, int_on; + u64 cur_ints; + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + while (mask) { + if (mask & 1) { + mask >>= 1; + break; + } + mask >>= 1; + i++; + } + + if (mask) { + printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); + return; + } + + /* Convert logical CPU to physical CPU */ + cpu = cpu_logical_map(i); + + /* Protect against other affinity changers and IMR manipulation */ + spin_lock_irqsave(&desc->lock, flags); + spin_lock(&sb1250_imr_lock); + + /* Swizzle each CPU's IMR (but leave the IP selection alone) */ + old_cpu = sb1250_irq_owner[irq]; + cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + int_on = !(cur_ints & (((u64) 1) << irq)); + if (int_on) { + /* If it was on, mask it */ + cur_ints |= (((u64) 1) << irq); + __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + } + sb1250_irq_owner[irq] = cpu; + if (int_on) { + /* unmask for the new CPU */ + cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + } + spin_unlock(&sb1250_imr_lock); + spin_unlock_irqrestore(&desc->lock, flags); +} +#endif + + +/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */ +extern void sb1250_irq_handler(void); + +/*****************************************************************************/ + +static unsigned int startup_sb1250_irq(unsigned int irq) +{ + sb1250_unmask_irq(sb1250_irq_owner[irq], irq); + + return 0; /* never anything pending */ +} + + +static void disable_sb1250_irq(unsigned int irq) +{ + sb1250_mask_irq(sb1250_irq_owner[irq], irq); +} + +static void enable_sb1250_irq(unsigned int irq) +{ + sb1250_unmask_irq(sb1250_irq_owner[irq], irq); +} + + +static void ack_sb1250_irq(unsigned int irq) +{ +#ifdef CONFIG_SIBYTE_HAS_LDT + u64 pending; + + /* + * If the interrupt was an HT interrupt, now is the time to + * clear it. NOTE: we assume the HT bridge was set up to + * deliver the interrupts to all CPUs (which makes affinity + * changing easier for us) + */ + pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], + R_IMR_LDT_INTERRUPT))); + pending &= ((u64)1 << (irq)); + if (pending) { + int i; + for (i=0; i<NR_CPUS; i++) { + int cpu; +#ifdef CONFIG_SMP + cpu = cpu_logical_map(i); +#else + cpu = i; +#endif + /* + * Clear for all CPUs so an affinity switch + * doesn't find an old status + */ + bus_writeq(pending, + IOADDR(A_IMR_REGISTER(cpu, + R_IMR_LDT_INTERRUPT_CLR))); + } + + /* + * Generate EOI. For Pass 1 parts, EOI is a nop. For + * Pass 2, the LDT world may be edge-triggered, but + * this EOI shouldn't hurt. If they are + * level-sensitive, the EOI is required. + */ + *(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0; + } +#endif + sb1250_mask_irq(sb1250_irq_owner[irq], irq); +} + + +static void end_sb1250_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + sb1250_unmask_irq(sb1250_irq_owner[irq], irq); + } +} + + +void __init init_sb1250_irqs(void) +{ + int i; + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + if (i < SB1250_NR_IRQS) { + irq_desc[i].handler = &sb1250_irq_type; + sb1250_irq_owner[i] = 0; + } else { + irq_desc[i].handler = &no_irq_type; + } + } +} + + +static irqreturn_t sb1250_dummy_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + return IRQ_NONE; +} + +static struct irqaction sb1250_dummy_action = { + .handler = sb1250_dummy_handler, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "sb1250-private", + .next = NULL, + .dev_id = 0 +}; + +int sb1250_steal_irq(int irq) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + int retval = 0; + + if (irq >= SB1250_NR_IRQS) + return -EINVAL; + + spin_lock_irqsave(&desc->lock,flags); + /* Don't allow sharing at all for these */ + if (desc->action != NULL) + retval = -EBUSY; + else { + desc->action = &sb1250_dummy_action; + desc->depth = 0; + } + spin_unlock_irqrestore(&desc->lock,flags); + return 0; +} + +/* + * arch_init_irq is called early in the boot sequence from init/main.c via + * init_IRQ. It is responsible for setting up the interrupt mapper and + * installing the handler that will be responsible for dispatching interrupts + * to the "right" place. + */ +/* + * For now, map all interrupts to IP[2]. We could save + * some cycles by parceling out system interrupts to different + * IP lines, but keep it simple for bringup. We'll also direct + * all interrupts to a single CPU; we should probably route + * PCI and LDT to one cpu and everything else to the other + * to balance the load a bit. + * + * On the second cpu, everything is set to IP5, which is + * ignored, EXCEPT the mailbox interrupt. That one is + * set to IP[2] so it is handled. This is needed so we + * can do cross-cpu function calls, as requred by SMP + */ + +#define IMR_IP2_VAL K_INT_MAP_I0 +#define IMR_IP3_VAL K_INT_MAP_I1 +#define IMR_IP4_VAL K_INT_MAP_I2 +#define IMR_IP5_VAL K_INT_MAP_I3 +#define IMR_IP6_VAL K_INT_MAP_I4 + +void __init arch_init_irq(void) +{ + + unsigned int i; + u64 tmp; + unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | + STATUSF_IP1 | STATUSF_IP0; + + /* Default everything to IP2 */ + for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */ + bus_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); + bus_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); + } + + init_sb1250_irqs(); + + /* + * Map the high 16 bits of the mailbox registers to IP[3], for + * inter-cpu messages + */ + /* Was I1 */ + bus_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); + bus_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); + + /* Clear the mailboxes. The firmware may leave them dirty */ + bus_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); + bus_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); + + /* Mask everything except the mailbox registers for both cpus */ + tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0); + bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); + bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); + + sb1250_steal_irq(K_INT_MBOX_0); + + /* + * Note that the timer interrupts are also mapped, but this is + * done in sb1250_time_init(). Also, the profiling driver + * does its own management of IP7. + */ + +#ifdef CONFIG_KGDB + imask |= STATUSF_IP6; +#endif + /* Enable necessary IPs, disable the rest */ + change_c0_status(ST0_IM, imask); + set_except_vector(0, sb1250_irq_handler); + +#ifdef CONFIG_KGDB + if (kgdb_flag) { + kgdb_irq = K_INT_UART_0 + kgdb_port; + +#ifdef CONFIG_SIBYTE_SB1250_DUART + sb1250_duart_present[kgdb_port] = 0; +#endif + /* Setup uart 1 settings, mapper */ + bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); + + sb1250_steal_irq(kgdb_irq); + bus_writeq(IMR_IP6_VAL, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (kgdb_irq<<3))); + sb1250_unmask_irq(0, kgdb_irq); + } +#endif +} + +#ifdef CONFIG_KGDB + +#include <linux/delay.h> + +#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg))) +#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg))) + +void sb1250_kgdb_interrupt(struct pt_regs *regs) +{ + /* + * Clear break-change status (allow some time for the remote + * host to stop the break, since we would see another + * interrupt on the end-of-break too) + */ + kstat_this_cpu.irqs[kgdb_irq]++; + mdelay(500); + duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | + M_DUART_RX_EN | M_DUART_TX_EN); + set_async_breakpoint(®s->cp0_epc); +} + +#endif /* CONFIG_KGDB */ |