powerpc/fsl-pci: Unify pci/pcie initialization code

We unified the Freescale pci/pcie initialization by changing the fsl_pci
to a platform driver. In previous PCI code architecture the initialization
routine is called at board_setup_arch stage. Now the initialization is done
in probe function which is architectural better. Also It's convenient for
adding PM support for PCI controller in later patch.

Now we registered pci controllers as platform devices. So we combine two
initialization code as one platform driver.

Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 20 insertions, 42 deletions

diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
index b6a728b0a8ca..e6285ae6f423 100644
--- a/arch/powerpc/platforms/85xx/ge_imp3a.c
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -22,7 +22,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -84,53 +83,39 @@ void __init ge_imp3a_pic_init(void)
 	of_node_put(cascade_node);
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif	/* CONFIG_PCI */
-
-/*
- * Setup the architecture
- */
-static void __init ge_imp3a_setup_arch(void)
+static void ge_imp3a_pci_assign_primary(void)
 {
-	struct device_node *regs;
 #ifdef CONFIG_PCI
 	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
+	struct resource rsrc;
 
-	if (ppc_md.progress)
-		ppc_md.progress("ge_imp3a_setup_arch()", 0);
-
-#ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
 		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+			if ((rsrc.start & 0xfffff) == 0x9000)
+				fsl_pci_primary = np;
 		}
 	}
 #endif
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+	struct device_node *regs;
+
+	if (ppc_md.progress)
+		ppc_md.progress("ge_imp3a_setup_arch()", 0);
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	ge_imp3a_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
@@ -215,17 +200,10 @@ static int __init ge_imp3a_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return of_flat_dt_is_compatible(root, "ge,IMP3A");
 }
 
-machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);