summaryrefslogtreecommitdiff
path: root/drivers/clk/clk-si5351.c
diff options
context:
space:
mode:
authorJacob Siverskog <jacob@teenage.engineering>2015-11-20 21:03:13 +0300
committerStephen Boyd <sboyd@codeaurora.org>2015-11-20 21:40:37 +0300
commit6dc669a22c77ad9c812bef82e186b3ab254470cb (patch)
treefb8aafbd3e645f5620d26f86aa456639ab01676f /drivers/clk/clk-si5351.c
parentc1de13574d7880c7321abe789ef02fa540631eaf (diff)
downloadlinux-6dc669a22c77ad9c812bef82e186b3ab254470cb.tar.xz
clk: si5351: Add PLL soft reset
This is according to figure 12 ("I2C Programming Procedure") in "Si5351A/B/C Data Sheet" (https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf). Without the PLL soft reset, we were unable to get three outputs working at the same time. According to Silicon Labs support, performing PLL soft reset will only be noticeable if the PLL parameters have been changed. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Signed-off-by: Jens Rudberg <jens@teenage.engineering> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Diffstat (limited to 'drivers/clk/clk-si5351.c')
-rw-r--r--drivers/clk/clk-si5351.c7
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index e346b223199d..850316ac8831 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -1091,6 +1091,13 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
SI5351_CLK_POWERDOWN, 0);
+ /*
+ * Do a pll soft reset on both plls, needed in some cases to get
+ * all outputs running.
+ */
+ si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
+ SI5351_PLL_RESET_A | SI5351_PLL_RESET_B);
+
dev_dbg(&hwdata->drvdata->client->dev,
"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
__func__, clk_hw_get_name(hw), (1 << rdiv),