diff options
author | Tali Perry <tali.perry1@gmail.com> | 2022-05-25 06:23:38 +0300 |
---|---|---|
committer | Wolfram Sang <wsa@kernel.org> | 2022-06-08 23:01:04 +0300 |
commit | 47d506d1a28fd10a9fb1f33df5622d88fae72095 (patch) | |
tree | 327e9176985a0353181c73a3880b3d493666c443 /drivers/i2c/busses/i2c-npcm7xx.c | |
parent | 29d2bff1c34ad3e413bcdaa81b88e209b308031d (diff) | |
download | linux-47d506d1a28fd10a9fb1f33df5622d88fae72095.tar.xz |
i2c: npcm: Remove own slave addresses 2:10
NPCM can support up to 10 own slave addresses. In practice, only one
address is actually being used. In order to access addresses 2 and above,
need to switch register banks. The switch needs spinlock.
To avoid using spinlock for this useless feature removed support of SA >=
2. Also fix returned slave event enum.
Remove some comment since the bank selection is not required. The bank
selection is not required since the supported slave addresses are reduced.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Diffstat (limited to 'drivers/i2c/busses/i2c-npcm7xx.c')
-rw-r--r-- | drivers/i2c/busses/i2c-npcm7xx.c | 41 |
1 files changed, 16 insertions, 25 deletions
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index 5960ccde6574..b5cc83e51029 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -123,11 +123,11 @@ enum i2c_addr { * Since the addr regs are sprinkled all over the address space, * use this array to get the address or each register. */ -#define I2C_NUM_OWN_ADDR 10 +#define I2C_NUM_OWN_ADDR 2 +#define I2C_NUM_OWN_ADDR_SUPPORTED 2 + static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = { - NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4, - NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8, - NPCM_I2CADDR9, NPCM_I2CADDR10, + NPCM_I2CADDR1, NPCM_I2CADDR2, }; #endif @@ -392,14 +392,10 @@ static void npcm_i2c_disable(struct npcm_i2c *bus) #if IS_ENABLED(CONFIG_I2C_SLAVE) int i; - /* select bank 0 for I2C addresses */ - npcm_i2c_select_bank(bus, I2C_BANK_0); - /* Slave addresses removal */ - for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) + for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR_SUPPORTED; i++) iowrite8(0, bus->reg + npcm_i2caddr[i]); - npcm_i2c_select_bank(bus, I2C_BANK_1); #endif /* Disable module */ i2cctl2 = ioread8(bus->reg + NPCM_I2CCTL2); @@ -604,8 +600,7 @@ static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type, i2cctl1 &= ~NPCM_I2CCTL1_GCMEN; iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1); return 0; - } - if (addr_type == I2C_ARP_ADDR) { + } else if (addr_type == I2C_ARP_ADDR) { i2cctl3 = ioread8(bus->reg + NPCM_I2CCTL3); if (enable) i2cctl3 |= I2CCTL3_ARPMEN; @@ -614,16 +609,16 @@ static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type, iowrite8(i2cctl3, bus->reg + NPCM_I2CCTL3); return 0; } + if (addr_type > I2C_SLAVE_ADDR2 && addr_type <= I2C_SLAVE_ADDR10) + dev_err(bus->dev, "try to enable more than 2 SA not supported\n"); + if (addr_type >= I2C_ARP_ADDR) return -EFAULT; - /* select bank 0 for address 3 to 10 */ - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_0); + /* Set and enable the address */ iowrite8(sa_reg, bus->reg + npcm_i2caddr[addr_type]); npcm_i2c_slave_int_enable(bus, enable); - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_1); + return 0; } #endif @@ -846,15 +841,11 @@ static u8 npcm_i2c_get_slave_addr(struct npcm_i2c *bus, enum i2c_addr addr_type) { u8 slave_add; - /* select bank 0 for address 3 to 10 */ - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_0); + if (addr_type > I2C_SLAVE_ADDR2 && addr_type <= I2C_SLAVE_ADDR10) + dev_err(bus->dev, "get slave: try to use more than 2 SA not supported\n"); slave_add = ioread8(bus->reg + npcm_i2caddr[(int)addr_type]); - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_1); - return slave_add; } @@ -864,12 +855,12 @@ static int npcm_i2c_remove_slave_addr(struct npcm_i2c *bus, u8 slave_add) /* Set the enable bit */ slave_add |= 0x80; - npcm_i2c_select_bank(bus, I2C_BANK_0); - for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) { + + for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR_SUPPORTED; i++) { if (ioread8(bus->reg + npcm_i2caddr[i]) == slave_add) iowrite8(0, bus->reg + npcm_i2caddr[i]); } - npcm_i2c_select_bank(bus, I2C_BANK_1); + return 0; } |