diff options
author | Jason Gunthorpe <jgg@mellanox.com> | 2018-01-29 23:26:40 +0300 |
---|---|---|
committer | Jason Gunthorpe <jgg@mellanox.com> | 2018-01-30 19:30:00 +0300 |
commit | e7996a9a77fc669387da43ff4823b91cc4872bd0 (patch) | |
tree | 617f0a128e222539d67e8cccc359f1bc4b984900 /drivers/media/dvb-frontends/m88ds3103.h | |
parent | b5fa635aab8f0d39a824c01991266a6d06f007fb (diff) | |
parent | d8a5b80568a9cb66810e75b182018e9edb68e8ff (diff) | |
download | linux-e7996a9a77fc669387da43ff4823b91cc4872bd0.tar.xz |
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Diffstat (limited to 'drivers/media/dvb-frontends/m88ds3103.h')
-rw-r--r-- | drivers/media/dvb-frontends/m88ds3103.h | 155 |
1 files changed, 65 insertions, 90 deletions
diff --git a/drivers/media/dvb-frontends/m88ds3103.h b/drivers/media/dvb-frontends/m88ds3103.h index 04b355a005fb..1a8964a2265d 100644 --- a/drivers/media/dvb-frontends/m88ds3103.h +++ b/drivers/media/dvb-frontends/m88ds3103.h @@ -25,6 +25,34 @@ */ /** + * enum m88ds3103_ts_mode - TS connection mode + * @M88DS3103_TS_SERIAL: TS output pin D0, normal + * @M88DS3103_TS_SERIAL_D7: TS output pin D7 + * @M88DS3103_TS_PARALLEL: TS Parallel mode + * @M88DS3103_TS_CI: TS CI Mode + */ +enum m88ds3103_ts_mode { + M88DS3103_TS_SERIAL, + M88DS3103_TS_SERIAL_D7, + M88DS3103_TS_PARALLEL, + M88DS3103_TS_CI +}; + +/** + * enum m88ds3103_clock_out + * @M88DS3103_CLOCK_OUT_DISABLED: Clock output is disabled + * @M88DS3103_CLOCK_OUT_ENABLED: Clock output is enabled with crystal + * clock. + * @M88DS3103_CLOCK_OUT_ENABLED_DIV2: Clock output is enabled with half + * crystal clock. + */ +enum m88ds3103_clock_out { + M88DS3103_CLOCK_OUT_DISABLED, + M88DS3103_CLOCK_OUT_ENABLED, + M88DS3103_CLOCK_OUT_ENABLED_DIV2 +}; + +/** * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver * @clk: Clock frequency. * @i2c_wr_max: Max bytes I2C adapter can write at once. @@ -44,24 +72,16 @@ * @get_dvb_frontend: Get DVB frontend. * @get_i2c_adapter: Get I2C adapter. */ - struct m88ds3103_platform_data { u32 clk; u16 i2c_wr_max; -#define M88DS3103_TS_SERIAL 0 /* TS output pin D0, normal */ -#define M88DS3103_TS_SERIAL_D7 1 /* TS output pin D7 */ -#define M88DS3103_TS_PARALLEL 2 /* TS Parallel mode */ -#define M88DS3103_TS_CI 3 /* TS CI Mode */ - u8 ts_mode:2; + enum m88ds3103_ts_mode ts_mode; u32 ts_clk; + enum m88ds3103_clock_out clk_out; u8 ts_clk_pol:1; u8 spec_inv:1; u8 agc; u8 agc_inv:1; -#define M88DS3103_CLOCK_OUT_DISABLED 0 -#define M88DS3103_CLOCK_OUT_ENABLED 1 -#define M88DS3103_CLOCK_OUT_ENABLED_DIV2 2 - u8 clk_out:2; u8 envelope_mode:1; u8 lnb_hv_pol:1; u8 lnb_en_pol:1; @@ -73,105 +93,60 @@ struct m88ds3103_platform_data { u8 attach_in_use:1; }; -/* - * Do not add new m88ds3103_attach() users! Use I2C bindings instead. +/** + * struct m88ds3103_config - m88ds3102 configuration + * + * @i2c_addr: I2C address. Default: none, must set. Example: 0x68, ... + * @clock: Device's clock. Default: none, must set. Example: 27000000 + * @i2c_wr_max: Max bytes I2C provider is asked to write at once. + * Default: none, must set. Example: 33, 65, ... + * @ts_mode: TS output mode, as defined by &enum m88ds3103_ts_mode. + * Default: M88DS3103_TS_SERIAL. + * @ts_clk: TS clk in KHz. Default: 0. + * @ts_clk_pol: TS clk polarity.Default: 0. + * 1-active at falling edge; 0-active at rising edge. + * @spec_inv: Spectrum inversion. Default: 0. + * @agc_inv: AGC polarity. Default: 0. + * @clock_out: Clock output, as defined by &enum m88ds3103_clock_out. + * Default: M88DS3103_CLOCK_OUT_DISABLED. + * @envelope_mode: DiSEqC envelope mode. Default: 0. + * @agc: AGC configuration. Default: none, must set. + * @lnb_hv_pol: LNB H/V pin polarity. Default: 0. Values: + * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18; + * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13. + * @lnb_en_pol: LNB enable pin polarity. Default: 0. Values: + * 1: pin high to enable, pin low to disable; + * 0: pin high to disable, pin low to enable. */ struct m88ds3103_config { - /* - * I2C address - * Default: none, must set - * 0x68, ... - */ u8 i2c_addr; - - /* - * clock - * Default: none, must set - * 27000000 - */ u32 clock; - - /* - * max bytes I2C provider is asked to write at once - * Default: none, must set - * 33, 65, ... - */ u16 i2c_wr_max; - - /* - * TS output mode - * Default: M88DS3103_TS_SERIAL - */ -#define M88DS3103_TS_SERIAL 0 /* TS output pin D0, normal */ -#define M88DS3103_TS_SERIAL_D7 1 /* TS output pin D7 */ -#define M88DS3103_TS_PARALLEL 2 /* TS Parallel mode */ -#define M88DS3103_TS_CI 3 /* TS CI Mode */ u8 ts_mode; - - /* - * TS clk in KHz - * Default: 0. - */ u32 ts_clk; - - /* - * TS clk polarity. - * Default: 0. 1-active at falling edge; 0-active at rising edge. - */ u8 ts_clk_pol:1; - - /* - * spectrum inversion - * Default: 0 - */ u8 spec_inv:1; - - /* - * AGC polarity - * Default: 0 - */ u8 agc_inv:1; - - /* - * clock output - * Default: M88DS3103_CLOCK_OUT_DISABLED - */ -#define M88DS3103_CLOCK_OUT_DISABLED 0 -#define M88DS3103_CLOCK_OUT_ENABLED 1 -#define M88DS3103_CLOCK_OUT_ENABLED_DIV2 2 u8 clock_out; - - /* - * DiSEqC envelope mode - * Default: 0 - */ u8 envelope_mode:1; - - /* - * AGC configuration - * Default: none, must set - */ u8 agc; - - /* - * LNB H/V pin polarity - * Default: 0. - * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18. - * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13. - */ u8 lnb_hv_pol:1; - - /* - * LNB enable pin polarity - * Default: 0. - * 1: pin high to enable, pin low to disable. - * 0: pin high to disable, pin low to enable. - */ u8 lnb_en_pol:1; }; #if defined(CONFIG_DVB_M88DS3103) || \ (defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE)) +/** + * Attach a m88ds3103 demod + * + * @config: pointer to &struct m88ds3103_config with demod configuration. + * @i2c: i2c adapter to use. + * @tuner_i2c: on success, returns the I2C adapter associated with + * m88ds3103 tuner. + * + * return: FE pointer on success, NULL on failure. + * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead. + */ extern struct dvb_frontend *m88ds3103_attach( const struct m88ds3103_config *config, struct i2c_adapter *i2c, |