summaryrefslogtreecommitdiff
path: root/drivers/media/rc/ene_ir.h
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@redhat.com>2010-11-10 05:00:14 +0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2010-12-29 13:16:36 +0300
commit32cf86f6d16367db5a10039c1dd938a2427d697c (patch)
tree21e6716b64d80d280da2561efd873430ca833f08 /drivers/media/rc/ene_ir.h
parent3ffea4988be3f3fa65f2104ba31eff2b5e0e82a0 (diff)
downloadlinux-32cf86f6d16367db5a10039c1dd938a2427d697c.tar.xz
[media] rename drivers/media/IR to drives/media/rc
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/rc/ene_ir.h')
-rw-r--r--drivers/media/rc/ene_ir.h262
1 files changed, 262 insertions, 0 deletions
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
new file mode 100644
index 000000000000..f5870667a433
--- /dev/null
+++ b/drivers/media/rc/ene_ir.h
@@ -0,0 +1,262 @@
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_IO_SIZE 4
+
+/* 8 bytes of samples, divided in 2 packets*/
+#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */
+#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */
+#define ENE_FW_PACKET_SIZE 4
+
+/* first firmware flag register */
+#define ENE_FW1 0xF8F8 /* flagr */
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/
+#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/
+#define ENE_FW1_LED_ON 0x10 /* turn on a led */
+
+#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware flag register */
+#define ENE_FW2 0xF8F9 /* flagw */
+#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */
+#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/
+#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */
+#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */
+#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */
+
+#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* firmware RX pointer for new style buffer */
+#define ENE_FW_RX_POINTER 0xF8FA
+
+/* high parts of samples for fan input (8 samples)*/
+#define ENE_FW_SMPL_BUF_FAN 0xF8FB
+#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */
+#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */
+#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* transmitter ports */
+#define ENE_GPIOFS1 0xFC01
+#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */
+#define ENE_GPIOFS8 0xFC08
+#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+
+/* IRQ registers block (for revision C,D) */
+#define ENE_IRQ 0xFE9B /* new irq settings register */
+#define ENE_IRQ_MASK 0x0F /* irq number mask */
+#define ENE_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR Config register #1 */
+#define ENE_CIRCFG 0xFEC0
+#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */
+#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */
+#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */
+#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */
+
+#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */
+#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */
+#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */
+#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */
+
+/* CIR config register #2 */
+#define ENE_CIRCFG2 0xFEC1
+#define ENE_CIRCFG2_RLC 0x00
+#define ENE_CIRCFG2_RC5 0x01
+#define ENE_CIRCFG2_RC6 0x02
+#define ENE_CIRCFG2_NEC 0x03
+#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */
+#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */
+#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */
+#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */
+
+/* Knobs for protocol decoding - will document when/if will use them */
+#define ENE_CIRPF 0xFEC2
+#define ENE_CIRHIGH 0xFEC3
+#define ENE_CIRBIT 0xFEC4
+#define ENE_CIRSTART 0xFEC5
+#define ENE_CIRSTART2 0xFEC6
+
+/* Actual register which contains RLC RX data - read by firmware */
+#define ENE_CIRDAT_IN 0xFEC7
+
+
+/* RLC configuration - sample period (1us resulution) + idle mode */
+#define ENE_CIRRLC_CFG 0xFEC8
+#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */
+#define ENE_DEFAULT_SAMPLE_PERIOD 50
+
+/* Two byte RLC TX buffer */
+#define ENE_CIRRLC_OUT0 0xFEC9
+#define ENE_CIRRLC_OUT1 0xFECA
+#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */
+#define ENE_CIRRLC_OUT_MASK 0x7F
+
+
+/* Carrier detect setting
+ * Low nibble - number of carrier pulses to average
+ * High nibble - number of initial carrier pulses to discard
+ */
+#define ENE_CIRCAR_PULS 0xFECB
+
+/* detected RX carrier period (resolution: 500 ns) */
+#define ENE_CIRCAR_PRD 0xFECC
+#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */
+
+/* detected RX carrier pulse width (resolution: 500 ns) */
+#define ENE_CIRCAR_HPRD 0xFECD
+
+/* TX period (resolution: 500 ns, minimum 2)*/
+#define ENE_CIRMOD_PRD 0xFECE
+#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/
+
+#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */
+#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */
+
+/* TX pulse width (resolution: 500 ns)*/
+#define ENE_CIRMOD_HPRD 0xFECF
+
+/* Hardware versions */
+#define ENE_ECHV 0xFF00 /* hardware revision */
+#define ENE_PLLFRH 0xFF16
+#define ENE_PLLFRL 0xFF17
+#define ENE_DEFAULT_PLL_FREQ 1000
+
+#define ENE_ECSTS 0xFF1D
+#define ENE_ECSTS_RSRVD 0x04
+
+#define ENE_ECVER_MAJOR 0xFF1E /* chip version */
+#define ENE_ECVER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "ene_ir"
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D or later */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
+
+#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
+#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
+
+
+#define __dbg(level, format, ...) \
+ do { \
+ if (debug >= level) \
+ printk(KERN_DEBUG ENE_DRIVER_NAME \
+ ": " format "\n", ## __VA_ARGS__); \
+ } while (0)
+
+
+#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
+#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__)
+
+#define MS_TO_NS(msec) ((msec) * 1000)
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+
+ /* hw IO settings */
+ long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ bool hw_use_gpio_0a; /* gpio0a is demodulated input*/
+ bool hw_extra_buffer; /* hardware has 'extra buffer' */
+ bool hw_fan_input; /* fan input is IR data source */
+ bool hw_learning_and_tx_capable; /* learning & tx capable */
+ int pll_freq;
+ int buffer_len;
+
+ /* Extra RX buffer location */
+ int extra_buf1_address;
+ int extra_buf1_len;
+ int extra_buf2_address;
+ int extra_buf2_len;
+
+ /* HW state*/
+ int r_pointer; /* pointer to next sample to read */
+ int w_pointer; /* pointer to next sample hw will write */
+ bool rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+ unsigned int tx_sample; /* current sample for TX */
+ bool tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int *tx_buffer; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /* TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+
+ /* RX settings */
+ bool learning_mode_enabled; /* learning input enabled */
+ bool carrier_detect_enabled; /* carrier detect enabled */
+ int rx_period_adjust;
+ bool rx_enabled;
+};
+
+static int ene_irq_status(struct ene_device *dev);
+static void ene_rx_read_hw_pointer(struct ene_device *dev);