diff options
author | Dario Binacchi <dariobin@libero.it> | 2021-03-03 00:54:35 +0300 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2021-03-30 12:14:53 +0300 |
commit | 132f2d45fb2302a582aef617ea766f3fa52a084c (patch) | |
tree | b423f62eb005ffd7d9133fa57cb68dde46360c45 /drivers/net/can/c_can/c_can_pci.c | |
parent | 13831ce69c775fb8186275fdeb91fa6daff2196c (diff) | |
download | linux-132f2d45fb2302a582aef617ea766f3fa52a084c.tar.xz |
can: c_can: add support to 64 message objects
D_CAN controller supports 16, 32, 64 or 128 message objects, comparing
to 32 on C_CAN. AM335x/AM437x Sitara processors and DRA7 SOC all
instantiate a D_CAN controller with 64 message objects, as described
in the "DCAN features" subsection of the CAN chapter of their
technical reference manuals.
The driver policy has been kept unchanged, and as in the previous
version, the first half of the message objects is used for reception
and the second for transmission.
The I/O load is increased only in the case of 64 message objects,
keeping it unchanged in the case of 32. Two 32-bit read accesses are
in fact required, which however remained at 16-bit for configurations
with 32 message objects.
Link: https://lore.kernel.org/r/20210302215435.18286-7-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/c_can/c_can_pci.c')
-rw-r--r-- | drivers/net/can/c_can/c_can_pci.c | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index fa419e795498..bf2f8c3da1c1 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -31,6 +31,8 @@ enum c_can_pci_reg_align { struct c_can_pci_data { /* Specify if is C_CAN or D_CAN */ enum c_can_dev_id type; + /* Number of message objects */ + unsigned int msg_obj_num; /* Set the register alignment in the memory */ enum c_can_pci_reg_align reg_align; /* Set the frequency */ @@ -147,7 +149,7 @@ static int c_can_pci_probe(struct pci_dev *pdev, } /* allocate the c_can device */ - dev = alloc_c_can_dev(C_CAN_NO_OF_OBJECTS); + dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num); if (!dev) { ret = -ENOMEM; goto out_iounmap; @@ -252,6 +254,7 @@ static void c_can_pci_remove(struct pci_dev *pdev) static const struct c_can_pci_data c_can_sta2x11 = { .type = BOSCH_C_CAN, + .msg_obj_num = 32, .reg_align = C_CAN_REG_ALIGN_32, .freq = 52000000, /* 52 Mhz */ .bar = 0, @@ -259,6 +262,7 @@ static const struct c_can_pci_data c_can_sta2x11 = { static const struct c_can_pci_data c_can_pch = { .type = BOSCH_C_CAN, + .msg_obj_num = 32, .reg_align = C_CAN_REG_32, .freq = 50000000, /* 50 MHz */ .init = c_can_pci_reset_pch, |