diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-12-12 01:27:06 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-12-12 01:27:06 +0300 |
commit | 70e71ca0af244f48a5dcf56dc435243792e3a495 (patch) | |
tree | f7d9c4c4d9a857a00043e9bf6aa2d6f533a34778 /drivers/net/ieee802154/at86rf230.c | |
parent | bae41e45b7400496b9bf0c70c6004419d9987819 (diff) | |
parent | 00c83b01d58068dfeb2e1351cca6fccf2a83fa8f (diff) | |
download | linux-70e71ca0af244f48a5dcf56dc435243792e3a495.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Diffstat (limited to 'drivers/net/ieee802154/at86rf230.c')
-rw-r--r-- | drivers/net/ieee802154/at86rf230.c | 445 |
1 files changed, 227 insertions, 218 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index c9d2a752abd7..1c0135620c62 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -12,10 +12,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * * Written by: * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> * Alexander Smirnov <alex.bluesman.smirnov@gmail.com> @@ -33,10 +29,10 @@ #include <linux/regmap.h> #include <linux/skbuff.h> #include <linux/of_gpio.h> +#include <linux/ieee802154.h> -#include <net/ieee802154.h> #include <net/mac802154.h> -#include <net/wpan-phy.h> +#include <net/cfg802154.h> struct at86rf230_local; /* at86rf2xx chip depend data. @@ -50,15 +46,11 @@ struct at86rf2xx_chip_data { u16 t_off_to_tx_on; u16 t_frame; u16 t_p_ack; - /* short interframe spacing time */ - u16 t_sifs; - /* long interframe spacing time */ - u16 t_lifs; /* completion timeout for tx in msecs */ u16 t_tx_timeout; int rssi_base_val; - int (*set_channel)(struct at86rf230_local *, int, int); + int (*set_channel)(struct at86rf230_local *, u8, u8); int (*get_desense_steps)(struct at86rf230_local *, s32); }; @@ -74,12 +66,14 @@ struct at86rf230_state_change { void (*complete)(void *context); u8 from_state; u8 to_state; + + bool irq_enable; }; struct at86rf230_local { struct spi_device *spi; - struct ieee802154_dev *dev; + struct ieee802154_hw *hw; struct at86rf2xx_chip_data *data; struct regmap *regmap; @@ -89,10 +83,10 @@ struct at86rf230_local { struct at86rf230_state_change irq; bool tx_aret; + s8 max_frame_retries; bool is_tx; /* spinlock for is_tx protection */ spinlock_t lock; - struct completion tx_complete; struct sk_buff *tx_skb; struct at86rf230_state_change tx; }; @@ -291,10 +285,11 @@ struct at86rf230_local { #define AT86RF2XX_NUMREGS 0x3F -static int +static void at86rf230_async_state_change(struct at86rf230_local *lp, struct at86rf230_state_change *ctx, - const u8 state, void (*complete)(void *context)); + const u8 state, void (*complete)(void *context), + const bool irq_enable); static inline int __at86rf230_write(struct at86rf230_local *lp, @@ -451,7 +446,8 @@ at86rf230_async_error_recover(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON, NULL); + at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON, NULL, false); + ieee802154_wake_queue(lp->hw); } static void @@ -461,21 +457,31 @@ at86rf230_async_error(struct at86rf230_local *lp, dev_err(&lp->spi->dev, "spi_async error %d\n", rc); at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, - at86rf230_async_error_recover); + at86rf230_async_error_recover, false); } /* Generic function to get some register value in async mode */ -static int +static void at86rf230_async_read_reg(struct at86rf230_local *lp, const u8 reg, struct at86rf230_state_change *ctx, - void (*complete)(void *context)) + void (*complete)(void *context), + const bool irq_enable) { + int rc; + u8 *tx_buf = ctx->buf; tx_buf[0] = (reg & CMD_REG_MASK) | CMD_REG; ctx->trx.len = 2; ctx->msg.complete = complete; - return spi_async(lp->spi, &ctx->msg); + ctx->irq_enable = irq_enable; + rc = spi_async(lp->spi, &ctx->msg); + if (rc) { + if (irq_enable) + enable_irq(lp->spi->irq); + + at86rf230_async_error(lp, ctx, rc); + } } static void @@ -512,7 +518,8 @@ at86rf230_async_state_assert(void *context) if (ctx->to_state == STATE_TX_ON) { at86rf230_async_state_change(lp, ctx, STATE_FORCE_TX_ON, - ctx->complete); + ctx->complete, + ctx->irq_enable); return; } } @@ -535,7 +542,6 @@ at86rf230_async_state_delay(void *context) struct at86rf230_local *lp = ctx->lp; struct at86rf2xx_chip_data *c = lp->data; bool force = false; - int rc; /* The force state changes are will show as normal states in the * state status subregister. We change the to_state to the @@ -604,10 +610,9 @@ at86rf230_async_state_delay(void *context) udelay(1); change: - rc = at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, - at86rf230_async_state_assert); - if (rc) - dev_err(&lp->spi->dev, "spi_async error %d\n", rc); + at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, + at86rf230_async_state_assert, + ctx->irq_enable); } static void @@ -622,10 +627,9 @@ at86rf230_async_state_change_start(void *context) /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */ if (trx_state == STATE_TRANSITION_IN_PROGRESS) { udelay(1); - rc = at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, - at86rf230_async_state_change_start); - if (rc) - dev_err(&lp->spi->dev, "spi_async error %d\n", rc); + at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, + at86rf230_async_state_change_start, + ctx->irq_enable); return; } @@ -647,20 +651,27 @@ at86rf230_async_state_change_start(void *context) ctx->trx.len = 2; ctx->msg.complete = at86rf230_async_state_delay; rc = spi_async(lp->spi, &ctx->msg); - if (rc) - dev_err(&lp->spi->dev, "spi_async error %d\n", rc); + if (rc) { + if (ctx->irq_enable) + enable_irq(lp->spi->irq); + + at86rf230_async_error(lp, &lp->state, rc); + } } -static int +static void at86rf230_async_state_change(struct at86rf230_local *lp, struct at86rf230_state_change *ctx, - const u8 state, void (*complete)(void *context)) + const u8 state, void (*complete)(void *context), + const bool irq_enable) { /* Initialization for the state change context */ ctx->to_state = state; ctx->complete = complete; - return at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, - at86rf230_async_state_change_start); + ctx->irq_enable = irq_enable; + at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx, + at86rf230_async_state_change_start, + irq_enable); } static void @@ -681,17 +692,16 @@ at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state) { int rc; - rc = at86rf230_async_state_change(lp, &lp->state, state, - at86rf230_sync_state_change_complete); - if (rc) { - at86rf230_async_error(lp, &lp->state, rc); - return rc; - } + at86rf230_async_state_change(lp, &lp->state, state, + at86rf230_sync_state_change_complete, + false); rc = wait_for_completion_timeout(&lp->state_complete, msecs_to_jiffies(100)); - if (!rc) + if (!rc) { + at86rf230_async_error(lp, &lp->state, -ETIMEDOUT); return -ETIMEDOUT; + } return 0; } @@ -701,8 +711,14 @@ at86rf230_tx_complete(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; + struct sk_buff *skb = lp->tx_skb; + + enable_irq(lp->spi->irq); - complete(&lp->tx_complete); + if (lp->max_frame_retries <= 0) + ieee802154_xmit_complete(lp->hw, skb, true); + else + ieee802154_xmit_complete(lp->hw, skb, false); } static void @@ -710,12 +726,9 @@ at86rf230_tx_on(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - int rc; - rc = at86rf230_async_state_change(lp, &lp->irq, STATE_RX_AACK_ON, - at86rf230_tx_complete); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_async_state_change(lp, &lp->irq, STATE_RX_AACK_ON, + at86rf230_tx_complete, true); } static void @@ -723,12 +736,9 @@ at86rf230_tx_trac_error(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - int rc; - rc = at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_tx_on); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_async_state_change(lp, ctx, STATE_TX_ON, + at86rf230_tx_on, true); } static void @@ -738,17 +748,14 @@ at86rf230_tx_trac_check(void *context) struct at86rf230_local *lp = ctx->lp; const u8 *buf = ctx->buf; const u8 trac = (buf[1] & 0xe0) >> 5; - int rc; /* If trac status is different than zero we need to do a state change * to STATE_FORCE_TRX_OFF then STATE_TX_ON to recover the transceiver * state to TX_ON. */ if (trac) { - rc = at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, - at86rf230_tx_trac_error); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, + at86rf230_tx_trac_error, true); return; } @@ -761,51 +768,29 @@ at86rf230_tx_trac_status(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - int rc; - rc = at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx, - at86rf230_tx_trac_check); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx, + at86rf230_tx_trac_check, true); } static void at86rf230_rx(struct at86rf230_local *lp, - const u8 *data, u8 len) + const u8 *data, const u8 len, const u8 lqi) { - u8 lqi; struct sk_buff *skb; u8 rx_local_buf[AT86RF2XX_MAX_BUF]; - if (len < 2) - return; - - /* read full frame buffer and invalid lqi value to lowest - * indicator if frame was is in a corrupted state. - */ - if (len > IEEE802154_MTU) { - lqi = 0; - len = IEEE802154_MTU; - dev_vdbg(&lp->spi->dev, "corrupted frame received\n"); - } else { - lqi = data[len]; - } - memcpy(rx_local_buf, data, len); enable_irq(lp->spi->irq); - skb = alloc_skb(IEEE802154_MTU, GFP_ATOMIC); + skb = dev_alloc_skb(IEEE802154_MTU); if (!skb) { dev_vdbg(&lp->spi->dev, "failed to allocate sk_buff\n"); return; } memcpy(skb_put(skb, len), rx_local_buf, len); - - /* We do not put CRC into the frame */ - skb_trim(skb, len - 2); - - ieee802154_rx_irqsafe(lp->dev, skb, lqi); + ieee802154_rx_irqsafe(lp->hw, skb, lqi); } static void @@ -814,20 +799,31 @@ at86rf230_rx_read_frame_complete(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; const u8 *buf = lp->irq.buf; - const u8 len = buf[1]; + u8 len = buf[1]; + + if (!ieee802154_is_valid_psdu_len(len)) { + dev_vdbg(&lp->spi->dev, "corrupted frame received\n"); + len = IEEE802154_MTU; + } - at86rf230_rx(lp, buf + 2, len); + at86rf230_rx(lp, buf + 2, len, buf[2 + len]); } -static int +static void at86rf230_rx_read_frame(struct at86rf230_local *lp) { + int rc; + u8 *buf = lp->irq.buf; buf[0] = CMD_FB; lp->irq.trx.len = AT86RF2XX_MAX_BUF; lp->irq.msg.complete = at86rf230_rx_read_frame_complete; - return spi_async(lp->spi, &lp->irq.msg); + rc = spi_async(lp->spi, &lp->irq.msg); + if (rc) { + enable_irq(lp->spi->irq); + at86rf230_async_error(lp, &lp->irq, rc); + } } static void @@ -835,7 +831,6 @@ at86rf230_rx_trac_check(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - int rc; /* Possible check on trac status here. This could be useful to make * some stats why receive is failed. Not used at the moment, but it's @@ -843,34 +838,31 @@ at86rf230_rx_trac_check(void *context) * The programming guide say do it so. */ - rc = at86rf230_rx_read_frame(lp); - if (rc) { - enable_irq(lp->spi->irq); - at86rf230_async_error(lp, ctx, rc); - } + at86rf230_rx_read_frame(lp); } -static int +static void at86rf230_irq_trx_end(struct at86rf230_local *lp) { spin_lock(&lp->lock); if (lp->is_tx) { lp->is_tx = 0; spin_unlock(&lp->lock); - enable_irq(lp->spi->irq); if (lp->tx_aret) - return at86rf230_async_state_change(lp, &lp->irq, - STATE_FORCE_TX_ON, - at86rf230_tx_trac_status); + at86rf230_async_state_change(lp, &lp->irq, + STATE_FORCE_TX_ON, + at86rf230_tx_trac_status, + true); else - return at86rf230_async_state_change(lp, &lp->irq, - STATE_RX_AACK_ON, - at86rf230_tx_complete); + at86rf230_async_state_change(lp, &lp->irq, + STATE_RX_AACK_ON, + at86rf230_tx_complete, + true); } else { spin_unlock(&lp->lock); - return at86rf230_async_read_reg(lp, RG_TRX_STATE, &lp->irq, - at86rf230_rx_trac_check); + at86rf230_async_read_reg(lp, RG_TRX_STATE, &lp->irq, + at86rf230_rx_trac_check, true); } } @@ -881,12 +873,9 @@ at86rf230_irq_status(void *context) struct at86rf230_local *lp = ctx->lp; const u8 *buf = lp->irq.buf; const u8 irq = buf[1]; - int rc; if (irq & IRQ_TRX_END) { - rc = at86rf230_irq_trx_end(lp); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_irq_trx_end(lp); } else { enable_irq(lp->spi->irq); dev_err(&lp->spi->dev, "not supported irq %02x received\n", @@ -901,13 +890,14 @@ static irqreturn_t at86rf230_isr(int irq, void *data) u8 *buf = ctx->buf; int rc; - disable_irq_nosync(lp->spi->irq); + disable_irq_nosync(irq); buf[0] = (RG_IRQ_STATUS & CMD_REG_MASK) | CMD_REG; ctx->trx.len = 2; ctx->msg.complete = at86rf230_irq_status; rc = spi_async(lp->spi, &ctx->msg); if (rc) { + enable_irq(irq); at86rf230_async_error(lp, ctx, rc); return IRQ_NONE; } @@ -960,22 +950,18 @@ at86rf230_xmit_tx_on(void *context) { struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; - int rc; - rc = at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, - at86rf230_write_frame); - if (rc) - at86rf230_async_error(lp, ctx, rc); + at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, + at86rf230_write_frame, false); } static int -at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb) +at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; struct at86rf230_state_change *ctx = &lp->tx; void (*tx_complete)(void *context) = at86rf230_write_frame; - int rc; lp->tx_skb = skb; @@ -986,61 +972,39 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb) if (lp->tx_aret) tx_complete = at86rf230_xmit_tx_on; - rc = at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - tx_complete); - if (rc) { - at86rf230_async_error(lp, ctx, rc); - return rc; - } - rc = wait_for_completion_interruptible_timeout(&lp->tx_complete, - msecs_to_jiffies(lp->data->t_tx_timeout)); - if (!rc) { - at86rf230_async_error(lp, ctx, rc); - return -ETIMEDOUT; - } - - /* Interfame spacing time, which is phy depend. - * TODO - * Move this handling in MAC 802.15.4 layer. - * This is currently a workaround to avoid fragmenation issues. - */ - if (skb->len > 18) - usleep_range(lp->data->t_lifs, lp->data->t_lifs + 10); - else - usleep_range(lp->data->t_sifs, lp->data->t_sifs + 10); + at86rf230_async_state_change(lp, ctx, STATE_TX_ON, tx_complete, false); return 0; } static int -at86rf230_ed(struct ieee802154_dev *dev, u8 *level) +at86rf230_ed(struct ieee802154_hw *hw, u8 *level) { - might_sleep(); BUG_ON(!level); *level = 0xbe; return 0; } static int -at86rf230_start(struct ieee802154_dev *dev) +at86rf230_start(struct ieee802154_hw *hw) { - return at86rf230_sync_state_change(dev->priv, STATE_RX_AACK_ON); + return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON); } static void -at86rf230_stop(struct ieee802154_dev *dev) +at86rf230_stop(struct ieee802154_hw *hw) { - at86rf230_sync_state_change(dev->priv, STATE_FORCE_TRX_OFF); + at86rf230_sync_state_change(hw->priv, STATE_FORCE_TRX_OFF); } static int -at86rf23x_set_channel(struct at86rf230_local *lp, int page, int channel) +at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) { return at86rf230_write_subreg(lp, SR_CHANNEL, channel); } static int -at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel) +at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel) { int rc; @@ -1061,44 +1025,60 @@ at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel) if (rc < 0) return rc; + /* This sets the symbol_duration according frequency on the 212. + * TODO move this handling while set channel and page in cfg802154. + * We can do that, this timings are according 802.15.4 standard. + * If we do that in cfg802154, this is a more generic calculation. + * + * This should also protected from ifs_timer. Means cancel timer and + * init with a new value. For now, this is okay. + */ + if (channel == 0) { + if (page == 0) { + /* SUB:0 and BPSK:0 -> BPSK-20 */ + lp->hw->phy->symbol_duration = 50; + } else { + /* SUB:1 and BPSK:0 -> BPSK-40 */ + lp->hw->phy->symbol_duration = 25; + } + } else { + if (page == 0) + /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */ + lp->hw->phy->symbol_duration = 40; + else + /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */ + lp->hw->phy->symbol_duration = 16; + } + + lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD * + lp->hw->phy->symbol_duration; + lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD * + lp->hw->phy->symbol_duration; + return at86rf230_write_subreg(lp, SR_CHANNEL, channel); } static int -at86rf230_channel(struct ieee802154_dev *dev, int page, int channel) +at86rf230_channel(struct ieee802154_hw *hw, u8 page, u8 channel) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; int rc; - might_sleep(); - - if (page < 0 || page > 31 || - !(lp->dev->phy->channels_supported[page] & BIT(channel))) { - WARN_ON(1); - return -EINVAL; - } - rc = lp->data->set_channel(lp, page, channel); - if (rc < 0) - return rc; - /* Wait for PLL */ usleep_range(lp->data->t_channel_switch, lp->data->t_channel_switch + 10); - dev->phy->current_channel = channel; - dev->phy->current_page = page; - - return 0; + return rc; } static int -at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev, +at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, struct ieee802154_hw_addr_filt *filt, unsigned long changed) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; - if (changed & IEEE802515_AFILT_SADDR_CHANGED) { + if (changed & IEEE802154_AFILT_SADDR_CHANGED) { u16 addr = le16_to_cpu(filt->short_addr); dev_vdbg(&lp->spi->dev, @@ -1107,7 +1087,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev, __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8); } - if (changed & IEEE802515_AFILT_PANID_CHANGED) { + if (changed & IEEE802154_AFILT_PANID_CHANGED) { u16 pan = le16_to_cpu(filt->pan_id); dev_vdbg(&lp->spi->dev, @@ -1116,7 +1096,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev, __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8); } - if (changed & IEEE802515_AFILT_IEEEADDR_CHANGED) { + if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { u8 i, addr[8]; memcpy(addr, &filt->ieee_addr, 8); @@ -1126,7 +1106,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev, __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]); } - if (changed & IEEE802515_AFILT_PANC_CHANGED) { + if (changed & IEEE802154_AFILT_PANC_CHANGED) { dev_vdbg(&lp->spi->dev, "at86rf230_set_hw_addr_filt called for panc change\n"); if (filt->pan_coord) @@ -1139,9 +1119,9 @@ at86rf230_set_hw_addr_filt(struct ieee802154_dev *dev, } static int -at86rf230_set_txpower(struct ieee802154_dev *dev, int db) +at86rf230_set_txpower(struct ieee802154_hw *hw, int db) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; /* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five * bits decrease power in 1dB steps. 0x60 represents extra PA gain of @@ -1158,17 +1138,17 @@ at86rf230_set_txpower(struct ieee802154_dev *dev, int db) } static int -at86rf230_set_lbt(struct ieee802154_dev *dev, bool on) +at86rf230_set_lbt(struct ieee802154_hw *hw, bool on) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on); } static int -at86rf230_set_cca_mode(struct ieee802154_dev *dev, u8 mode) +at86rf230_set_cca_mode(struct ieee802154_hw *hw, u8 mode) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; return at86rf230_write_subreg(lp, SR_CCA_MODE, mode); } @@ -1186,9 +1166,9 @@ at86rf23x_get_desens_steps(struct at86rf230_local *lp, s32 level) } static int -at86rf230_set_cca_ed_level(struct ieee802154_dev *dev, s32 level) +at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 level) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; if (level < lp->data->rssi_base_val || level > 30) return -EINVAL; @@ -1198,15 +1178,12 @@ at86rf230_set_cca_ed_level(struct ieee802154_dev *dev, s32 level) } static int -at86rf230_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be, +at86rf230_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; int rc; - if (min_be > max_be || max_be > 8 || retries > 5) - return -EINVAL; - rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be); if (rc) return rc; @@ -1219,15 +1196,13 @@ at86rf230_set_csma_params(struct ieee802154_dev *dev, u8 min_be, u8 max_be, } static int -at86rf230_set_frame_retries(struct ieee802154_dev *dev, s8 retries) +at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries) { - struct at86rf230_local *lp = dev->priv; + struct at86rf230_local *lp = hw->priv; int rc = 0; - if (retries < -1 || retries > 15) - return -EINVAL; - lp->tx_aret = retries >= 0; + lp->max_frame_retries = retries; if (retries >= 0) rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries); @@ -1235,9 +1210,36 @@ at86rf230_set_frame_retries(struct ieee802154_dev *dev, s8 retries) return rc; } -static struct ieee802154_ops at86rf230_ops = { +static int +at86rf230_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) +{ + struct at86rf230_local *lp = hw->priv; + int rc; + + if (on) { + rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 1); + if (rc < 0) + return rc; + + rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 1); + if (rc < 0) + return rc; + } else { + rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 0); + if (rc < 0) + return rc; + + rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 0); + if (rc < 0) + return rc; + } + + return 0; +} + +static const struct ieee802154_ops at86rf230_ops = { .owner = THIS_MODULE, - .xmit = at86rf230_xmit, + .xmit_async = at86rf230_xmit, .ed = at86rf230_ed, .set_channel = at86rf230_channel, .start = at86rf230_start, @@ -1249,6 +1251,7 @@ static struct ieee802154_ops at86rf230_ops = { .set_cca_ed_level = at86rf230_set_cca_ed_level, .set_csma_params = at86rf230_set_csma_params, .set_frame_retries = at86rf230_set_frame_retries, + .set_promiscuous_mode = at86rf230_set_promiscuous_mode, }; static struct at86rf2xx_chip_data at86rf233_data = { @@ -1259,8 +1262,6 @@ static struct at86rf2xx_chip_data at86rf233_data = { .t_off_to_tx_on = 80, .t_frame = 4096, .t_p_ack = 545, - .t_sifs = 192, - .t_lifs = 480, .t_tx_timeout = 2000, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, @@ -1275,8 +1276,6 @@ static struct at86rf2xx_chip_data at86rf231_data = { .t_off_to_tx_on = 110, .t_frame = 4096, .t_p_ack = 545, - .t_sifs = 192, - .t_lifs = 480, .t_tx_timeout = 2000, .rssi_base_val = -91, .set_channel = at86rf23x_set_channel, @@ -1291,8 +1290,6 @@ static struct at86rf2xx_chip_data at86rf212_data = { .t_off_to_tx_on = 200, .t_frame = 4096, .t_p_ack = 545, - .t_sifs = 192, - .t_lifs = 480, .t_tx_timeout = 2000, .rssi_base_val = -100, .set_channel = at86rf212_set_channel, @@ -1354,7 +1351,11 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) return -EINVAL; } - return 0; + /* Force setting slotted operation bit to 0. Sometimes the atben + * sets this bit and I don't know why. We set this always force + * to zero while probing. + */ + return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0); } static struct at86rf230_platform_data * @@ -1409,9 +1410,10 @@ at86rf230_detect_device(struct at86rf230_local *lp) return -EINVAL; } - lp->dev->extra_tx_headroom = 0; - lp->dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK | - IEEE802154_HW_TXPOWER | IEEE802154_HW_CSMA; + lp->hw->extra_tx_headroom = 0; + lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AACK | + IEEE802154_HW_TXPOWER | IEEE802154_HW_ARET | + IEEE802154_HW_AFILT | IEEE802154_HW_PROMISCUOUS; switch (part) { case 2: @@ -1421,15 +1423,19 @@ at86rf230_detect_device(struct at86rf230_local *lp) case 3: chip = "at86rf231"; lp->data = &at86rf231_data; - lp->dev->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 11; + lp->hw->phy->symbol_duration = 16; break; case 7: chip = "at86rf212"; if (version == 1) { lp->data = &at86rf212_data; - lp->dev->flags |= IEEE802154_HW_LBT; - lp->dev->phy->channels_supported[0] = 0x00007FF; - lp->dev->phy->channels_supported[2] = 0x00007FF; + lp->hw->flags |= IEEE802154_HW_LBT; + lp->hw->phy->channels_supported[0] = 0x00007FF; + lp->hw->phy->channels_supported[2] = 0x00007FF; + lp->hw->phy->current_channel = 5; + lp->hw->phy->symbol_duration = 25; } else { rc = -ENOTSUPP; } @@ -1437,7 +1443,9 @@ at86rf230_detect_device(struct at86rf230_local *lp) case 11: chip = "at86rf233"; lp->data = &at86rf233_data; - lp->dev->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 13; + lp->hw->phy->symbol_duration = 16; break; default: chip = "unkown"; @@ -1478,7 +1486,7 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp) static int at86rf230_probe(struct spi_device *spi) { struct at86rf230_platform_data *pdata; - struct ieee802154_dev *dev; + struct ieee802154_hw *hw; struct at86rf230_local *lp; unsigned int status; int rc, irq_type; @@ -1517,14 +1525,16 @@ static int at86rf230_probe(struct spi_device *spi) usleep_range(120, 240); } - dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops); - if (!dev) + hw = ieee802154_alloc_hw(sizeof(*lp), &at86rf230_ops); + if (!hw) return -ENOMEM; - lp = dev->priv; - lp->dev = dev; + lp = hw->priv; + lp->hw = hw; lp->spi = spi; - dev->parent = &spi->dev; + hw->parent = &spi->dev; + hw->vif_data_size = sizeof(*lp); + ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config); if (IS_ERR(lp->regmap)) { @@ -1541,7 +1551,6 @@ static int at86rf230_probe(struct spi_device *spi) goto free_dev; spin_lock_init(&lp->lock); - init_completion(&lp->tx_complete); init_completion(&lp->state_complete); spi_set_drvdata(spi, lp); @@ -1564,14 +1573,14 @@ static int at86rf230_probe(struct spi_device *spi) if (rc) goto free_dev; - rc = ieee802154_register_device(lp->dev); + rc = ieee802154_register_hw(lp->hw); if (rc) goto free_dev; return rc; free_dev: - ieee802154_free_device(lp->dev); + ieee802154_free_hw(lp->hw); return rc; } @@ -1582,8 +1591,8 @@ static int at86rf230_remove(struct spi_device *spi) /* mask all at86rf230 irq's */ at86rf230_write_subreg(lp, SR_IRQ_MASK, 0); - ieee802154_unregister_device(lp->dev); - ieee802154_free_device(lp->dev); + ieee802154_unregister_hw(lp->hw); + ieee802154_free_hw(lp->hw); dev_dbg(&spi->dev, "unregistered at86rf230\n"); return 0; |