summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/core.c
diff options
context:
space:
mode:
authorWen Gong <wgong@codeaurora.org>2020-04-07 08:12:30 +0300
committerKalle Valo <kvalo@codeaurora.org>2020-04-09 17:48:50 +0300
commitd81686d3335648197c5da3992b151648706dc0f8 (patch)
treef0428409265962d75c80b083f056635087cad376 /drivers/net/wireless/ath/ath10k/core.c
parent2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 (diff)
downloadlinux-d81686d3335648197c5da3992b151648706dc0f8.tar.xz
ath10k: disable TX complete indication of htt for sdio
For sdio chip, it is high latency bus, all the TX packet's content will be tranferred from HOST memory to firmware memory via sdio bus, then it need much more memory in firmware than low latency bus chip, for low latency chip, such as PCI-E, it only need to transfer the TX descriptor via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of TX logic will help TX efficiency since its memory is limited, and it will reduce the TX circle's time of each packet and then firmware will have more memory for TX since TX complete also need memeory. This patch disable TX complete indication from firmware for htt data packet, it will not have TX complete indication from firmware to ath10k. It will cut the cost of bus bandwidth of TX complete and make the TX logic of firmware simpler, it results in significant performance improvement on TX path. Udp TX throughout is 130Mbps without this patch, and it arrives 400Mbps with this patch. The downside of this patch is the command "iw wlan0 station dump" will show 0 for "tx retries" and "tx failed" since all tx packet's status is success. This patch only effect sdio chip, it will not effect PCI, SNOC etc. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200212080415.31265-2-wgong@codeaurora.org
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
-rw-r--r--drivers/net/wireless/ath/ath10k/core.c5
1 files changed, 1 insertions, 4 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 70f3bae92a85..4cd50a353047 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -723,10 +723,7 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
if (ret)
return ret;
- /* Data transfer is not initiated, when reduced Tx completion
- * is used for SDIO. disable it until fixed
- */
- param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
+ param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
/* Alternate credit size of 1544 as used by SDIO firmware is
* not big enough for mac80211 / native wifi frames. disable it