Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).

  The major core change is a rework to remove the two helpers around
  scsi_execute_cmd and use it as the only submission interface along
  with other minor fixes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
  scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
  scsi: ufs: core: Fix device management cmd timeout flow
  scsi: aic94xx: Add missing check for dma_map_single()
  scsi: smartpqi: Replace one-element array with flexible-array member
  scsi: mpt3sas: Fix a memory leak
  scsi: qla2xxx: Remove the unused variable wwn
  scsi: ufs: core: Fix kernel-doc syntax
  scsi: ufs: core: Add hibernation callbacks
  scsi: snic: Fix memory leak with using debugfs_lookup()
  scsi: ufs: core: Limit DMA alignment check
  scsi: Documentation: Correct spelling
  scsi: Documentation: Correct spelling
  scsi: target: Documentation: Correct spelling
  scsi: aacraid: Allocate cmd_priv with scsicmd
  scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
  scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
  scsi: ufs: core: Enable DMA clustering
  scsi: ufs: exynos: Fix the maximum segment size
  scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
  ...

13 files changed, 238 insertions, 143 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9ad233b40a9e..cf55f8e3bd9f 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1592,8 +1592,6 @@ struct lpfc_hba {
 	struct timer_list cpuhp_poll_timer;
 	struct list_head poll_list;	/* slowpath eq polling list */
 #define LPFC_POLL_HB	1		/* slowpath heartbeat */
-#define LPFC_POLL_FASTPATH	0	/* called from fastpath */
-#define LPFC_POLL_SLOWPATH	1	/* called from slowpath */
 
 	char os_host_name[MAXHOSTNAMELEN];
 
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 77e1b2911cb4..76c3434f8976 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1905,8 +1905,7 @@ lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr,
 		goto out_free_rdp;
 	}
 
-	strncpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16);
-	chbuf[16] = 0;
+	strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16);
 
 	len = scnprintf(buf, PAGE_SIZE - len, "VendorName:\t%s\n", chbuf);
 	len += scnprintf(buf + len, PAGE_SIZE - len,
@@ -1914,17 +1913,13 @@ lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr,
 			 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI],
 			 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 1],
 			 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 2]);
-	strncpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16);
-	chbuf[16] = 0;
+	strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16);
 	len += scnprintf(buf + len, PAGE_SIZE - len, "VendorPN:\t%s\n", chbuf);
-	strncpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16);
-	chbuf[16] = 0;
+	strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16);
 	len += scnprintf(buf + len, PAGE_SIZE - len, "VendorSN:\t%s\n", chbuf);
-	strncpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4);
-	chbuf[4] = 0;
+	strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4);
 	len += scnprintf(buf + len, PAGE_SIZE - len, "VendorRev:\t%s\n", chbuf);
-	strncpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8);
-	chbuf[8] = 0;
+	strscpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8);
 	len += scnprintf(buf + len, PAGE_SIZE - len, "DateCode:\t%s\n", chbuf);
 	len += scnprintf(buf + len, PAGE_SIZE - len, "Identifier:\t%xh\n",
 			 (uint8_t)rdp_context->page_a0[SSF_IDENTIFIER]);
@@ -1941,33 +1936,25 @@ lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr,
 			&rdp_context->page_a0[SSF_TRANSCEIVER_CODE_B7];
 
 	len += scnprintf(buf + len, PAGE_SIZE - len, "Speeds: \t");
-		if (*(uint8_t *)trasn_code_byte7 == 0) {
-			len += scnprintf(buf + len, PAGE_SIZE - len,
-					 "Unknown\n");
-		} else {
-			if (trasn_code_byte7->fc_sp_100MB)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "1 ");
-			if (trasn_code_byte7->fc_sp_200mb)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "2 ");
-			if (trasn_code_byte7->fc_sp_400MB)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "4 ");
-			if (trasn_code_byte7->fc_sp_800MB)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "8 ");
-			if (trasn_code_byte7->fc_sp_1600MB)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "16 ");
-			if (trasn_code_byte7->fc_sp_3200MB)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "32 ");
-			if (trasn_code_byte7->speed_chk_ecc)
-				len += scnprintf(buf + len, PAGE_SIZE - len,
-						 "64 ");
-			len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n");
-		}
+	if (*(uint8_t *)trasn_code_byte7 == 0) {
+		len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n");
+	} else {
+		if (trasn_code_byte7->fc_sp_100MB)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "1 ");
+		if (trasn_code_byte7->fc_sp_200mb)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "2 ");
+		if (trasn_code_byte7->fc_sp_400MB)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "4 ");
+		if (trasn_code_byte7->fc_sp_800MB)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "8 ");
+		if (trasn_code_byte7->fc_sp_1600MB)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "16 ");
+		if (trasn_code_byte7->fc_sp_3200MB)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "32 ");
+		if (trasn_code_byte7->speed_chk_ecc)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "64 ");
+		len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n");
+	}
 	temperature = (rdp_context->page_a2[SFF_TEMPERATURE_B1] << 8 |
 		       rdp_context->page_a2[SFF_TEMPERATURE_B0]);
 	vcc = (rdp_context->page_a2[SFF_VCC_B1] << 8 |
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 8928f016d09e..976fd5ee7f7e 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -253,7 +253,6 @@ int lpfc_read_object(struct lpfc_hba *phba, char *s, uint32_t *datap,
 		     uint32_t len);
 
 void lpfc_sli4_cleanup_poll_list(struct lpfc_hba *phba);
-int lpfc_sli4_poll_eq(struct lpfc_queue *q, uint8_t path);
 void lpfc_sli4_poll_hbtimer(struct timer_list *t);
 void lpfc_sli4_start_polling(struct lpfc_queue *q);
 void lpfc_sli4_stop_polling(struct lpfc_queue *q);
@@ -684,6 +683,7 @@ int lpfc_vmid_get_appid(struct lpfc_vport *vport, char *uuid,
 			union lpfc_vmid_io_tag *tag);
 void lpfc_vmid_vport_cleanup(struct lpfc_vport *vport);
 int lpfc_issue_els_qfpa(struct lpfc_vport *vport);
+void lpfc_reinit_vmid(struct lpfc_vport *vport);
 
 void lpfc_sli_rpi_release(struct lpfc_vport *vport,
 			  struct lpfc_nodelist *ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 919741bbe267..569639dc8b2c 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1123,6 +1123,9 @@ stop_rr_fcf_flogi:
 	if (sp->cmn.priority_tagging)
 		vport->phba->pport->vmid_flag |= (LPFC_VMID_ISSUE_QFPA |
 						  LPFC_VMID_TYPE_PRIO);
+	/* reinitialize the VMID datastructure before returning */
+	if (lpfc_is_vmid_enabled(phba))
+		lpfc_reinit_vmid(vport);
 
 	/*
 	 * Address a timing race with dev_loss.  If dev_loss is active on
@@ -2373,15 +2376,30 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		/* PRLI failed */
 		lpfc_printf_vlog(vport, mode, loglevel,
 				 "2754 PRLI failure DID:%06X Status:x%x/x%x, "
-				 "data: x%x\n",
+				 "data: x%x x%x\n",
 				 ndlp->nlp_DID, ulp_status,
-				 ulp_word4, ndlp->fc4_prli_sent);
+				 ulp_word4, ndlp->nlp_state,
+				 ndlp->fc4_prli_sent);
 
 		/* Do not call DSM for lpfc_els_abort'ed ELS cmds */
 		if (!lpfc_error_lost_link(ulp_status, ulp_word4))
 			lpfc_disc_state_machine(vport, ndlp, cmdiocb,
 						NLP_EVT_CMPL_PRLI);
 
+		/* The following condition catches an inflight transition
+		 * mismatch typically caused by an RSCN. Skip any
+		 * processing to allow recovery.
+		 */
+		if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE &&
+		    ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
+					 "2784 PRLI cmpl: state mismatch "
+					 "DID x%06x nstate x%x nflag x%x\n",
+					 ndlp->nlp_DID, ndlp->nlp_state,
+					 ndlp->nlp_flag);
+				goto out;
+		}
+
 		/*
 		 * For P2P topology, retain the node so that PLOGI can be
 		 * attempted on it again.
@@ -4673,6 +4691,15 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				/* the nameserver fails */
 				maxretry = 0;
 				delay = 100;
+			} else if (cmd == ELS_CMD_PRLI &&
+				   ndlp->nlp_state != NLP_STE_PRLI_ISSUE) {
+				/* State-command disagreement.  The PRLI was
+				 * failed with an invalid rpi meaning there
+				 * some unexpected state change.  Don't retry.
+				 */
+				maxretry = 0;
+				retry = 0;
+				break;
 			}
 			retry = 1;
 			break;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 80375d73b732..a6df0a5b4006 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1129,21 +1129,6 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
 	struct lpfc_nodelist *ndlp, *next_ndlp;
 
 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
-		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
-			/* It's possible the FLOGI to the fabric node never
-			 * successfully completed and never registered with the
-			 * transport.  In this case there is no way to clean up
-			 * the node.
-			 */
-			if (ndlp->nlp_DID == Fabric_DID) {
-				if (ndlp->nlp_prev_state ==
-				    NLP_STE_UNUSED_NODE &&
-				    !ndlp->fc4_xpt_flags)
-					lpfc_nlp_put(ndlp);
-			}
-			continue;
-		}
-
 		if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) ||
 		    ((vport->port_type == LPFC_NPIV_PORT) &&
 		     ((ndlp->nlp_DID == NameServer_DID) ||
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index fb3504dbb899..58fa39c403a0 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2009-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -4201,6 +4201,8 @@ struct lpfc_acqe_fc_la {
 #define LPFC_FC_LA_TYPE_MDS_LOOPBACK	0x5
 #define LPFC_FC_LA_TYPE_UNEXP_WWPN	0x6
 #define LPFC_FC_LA_TYPE_TRUNKING_EVENT  0x7
+#define LPFC_FC_LA_TYPE_ACTIVATE_FAIL		0x8
+#define LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT	0x9
 #define lpfc_acqe_fc_la_port_type_SHIFT		6
 #define lpfc_acqe_fc_la_port_type_MASK		0x00000003
 #define lpfc_acqe_fc_la_port_type_WORD		word0
@@ -4242,6 +4244,9 @@ struct lpfc_acqe_fc_la {
 #define lpfc_acqe_fc_la_fault_SHIFT		0
 #define lpfc_acqe_fc_la_fault_MASK		0x000000FF
 #define lpfc_acqe_fc_la_fault_WORD		word1
+#define lpfc_acqe_fc_la_link_status_SHIFT	8
+#define lpfc_acqe_fc_la_link_status_MASK	0x0000007F
+#define lpfc_acqe_fc_la_link_status_WORD	word1
 #define lpfc_acqe_fc_la_trunk_fault_SHIFT		0
 #define lpfc_acqe_fc_la_trunk_fault_MASK		0x0000000F
 #define lpfc_acqe_fc_la_trunk_fault_WORD		word1
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 389a35308be3..6eb4085a3a22 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -5190,16 +5190,25 @@ static void
 lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
 			   struct lpfc_acqe_link *acqe_link)
 {
-	switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
-	case LPFC_ASYNC_LINK_FAULT_NONE:
-	case LPFC_ASYNC_LINK_FAULT_LOCAL:
-	case LPFC_ASYNC_LINK_FAULT_REMOTE:
-	case LPFC_ASYNC_LINK_FAULT_LR_LRR:
+	switch (bf_get(lpfc_acqe_fc_la_att_type, acqe_link)) {
+	case LPFC_FC_LA_TYPE_LINK_DOWN:
+	case LPFC_FC_LA_TYPE_TRUNKING_EVENT:
+	case LPFC_FC_LA_TYPE_ACTIVATE_FAIL:
+	case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT:
 		break;
 	default:
-		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-				"0398 Unknown link fault code: x%x\n",
-				bf_get(lpfc_acqe_link_fault, acqe_link));
+		switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+		case LPFC_ASYNC_LINK_FAULT_NONE:
+		case LPFC_ASYNC_LINK_FAULT_LOCAL:
+		case LPFC_ASYNC_LINK_FAULT_REMOTE:
+		case LPFC_ASYNC_LINK_FAULT_LR_LRR:
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0398 Unknown link fault code: x%x\n",
+					bf_get(lpfc_acqe_link_fault, acqe_link));
+			break;
+		}
 		break;
 	}
 }
@@ -6282,6 +6291,7 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
 	LPFC_MBOXQ_t *pmb;
 	MAILBOX_t *mb;
 	struct lpfc_mbx_read_top *la;
+	char *log_level;
 	int rc;
 
 	if (bf_get(lpfc_trailer_type, acqe_fc) !=
@@ -6313,25 +6323,70 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
 				bf_get(lpfc_acqe_fc_la_port_number, acqe_fc);
 	phba->sli4_hba.link_state.fault =
 				bf_get(lpfc_acqe_link_fault, acqe_fc);
+	phba->sli4_hba.link_state.link_status =
+				bf_get(lpfc_acqe_fc_la_link_status, acqe_fc);
 
-	if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
-	    LPFC_FC_LA_TYPE_LINK_DOWN)
-		phba->sli4_hba.link_state.logical_speed = 0;
-	else if (!phba->sli4_hba.conf_trunk)
-		phba->sli4_hba.link_state.logical_speed =
+	/*
+	 * Only select attention types need logical speed modification to what
+	 * was previously set.
+	 */
+	if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_LINK_UP &&
+	    phba->sli4_hba.link_state.status < LPFC_FC_LA_TYPE_ACTIVATE_FAIL) {
+		if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
+		    LPFC_FC_LA_TYPE_LINK_DOWN)
+			phba->sli4_hba.link_state.logical_speed = 0;
+		else if (!phba->sli4_hba.conf_trunk)
+			phba->sli4_hba.link_state.logical_speed =
 				bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
+	}
 
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 			"2896 Async FC event - Speed:%dGBaud Topology:x%x "
 			"LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
-			"%dMbps Fault:%d\n",
+			"%dMbps Fault:x%x Link Status:x%x\n",
 			phba->sli4_hba.link_state.speed,
 			phba->sli4_hba.link_state.topology,
 			phba->sli4_hba.link_state.status,
 			phba->sli4_hba.link_state.type,
 			phba->sli4_hba.link_state.number,
 			phba->sli4_hba.link_state.logical_speed,
-			phba->sli4_hba.link_state.fault);
+			phba->sli4_hba.link_state.fault,
+			phba->sli4_hba.link_state.link_status);
+
+	/*
+	 * The following attention types are informational only, providing
+	 * further details about link status.  Overwrite the value of
+	 * link_state.status appropriately.  No further action is required.
+	 */
+	if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_ACTIVATE_FAIL) {
+		switch (phba->sli4_hba.link_state.status) {
+		case LPFC_FC_LA_TYPE_ACTIVATE_FAIL:
+			log_level = KERN_WARNING;
+			phba->sli4_hba.link_state.status =
+					LPFC_FC_LA_TYPE_LINK_DOWN;
+			break;
+		case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT:
+			/*
+			 * During bb credit recovery establishment, receiving
+			 * this attention type is normal.  Link Up attention
+			 * type is expected to occur before this informational
+			 * attention type so keep the Link Up status.
+			 */
+			log_level = KERN_INFO;
+			phba->sli4_hba.link_state.status =
+					LPFC_FC_LA_TYPE_LINK_UP;
+			break;
+		default:
+			log_level = KERN_INFO;
+			break;
+		}
+		lpfc_log_msg(phba, log_level, LOG_SLI,
+			     "2992 Async FC event - Informational Link "
+			     "Attention Type x%x\n",
+			     bf_get(lpfc_acqe_fc_la_att_type, acqe_fc));
+		return;
+	}
+
 	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -13918,6 +13973,13 @@ fcponly:
 	if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
 		sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
 
+	rc = dma_set_max_seg_size(&phba->pcidev->dev, sli4_params->sge_supp_len);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"6400 Can't set dma maximum segment size\n");
+		return rc;
+	}
+
 	/*
 	 * Check whether the adapter supports an embedded copy of the
 	 * FCP CMD IU within the WQE for FCP_Ixxx commands. In order
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7a1563564df7..e989f130434e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -1689,7 +1689,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	struct lpfc_pde6 *pde6 = NULL;
 	struct lpfc_pde7 *pde7 = NULL;
 	dma_addr_t dataphysaddr, protphysaddr;
-	unsigned short curr_data = 0, curr_prot = 0;
+	unsigned short curr_prot = 0;
 	unsigned int split_offset;
 	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
 	unsigned int protgrp_blks, protgrp_bytes;
@@ -1858,7 +1858,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 			bpl->tus.w = le32_to_cpu(bpl->tus.w);
 
 			num_bde++;
-			curr_data++;
 
 			if (split_offset)
 				break;
@@ -2119,7 +2118,7 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	struct scatterlist *sgpe = NULL; /* s/g prot entry */
 	struct sli4_sge_diseed *diseed = NULL;
 	dma_addr_t dataphysaddr, protphysaddr;
-	unsigned short curr_data = 0, curr_prot = 0;
+	unsigned short curr_prot = 0;
 	unsigned int split_offset;
 	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
 	unsigned int protgrp_blks, protgrp_bytes;
@@ -2364,7 +2363,6 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 				dma_offset += dma_len;
 
 				num_sge++;
-				curr_data++;
 
 				if (split_offset) {
 					sgl++;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 182aaae60386..edbd81c3b643 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -11270,6 +11270,30 @@ lpfc_sli4_calc_ring(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
 	}
 }
 
+inline void lpfc_sli4_poll_eq(struct lpfc_queue *eq)
+{
+	struct lpfc_hba *phba = eq->phba;
+
+	/*
+	 * Unlocking an irq is one of the entry point to check
+	 * for re-schedule, but we are good for io submission
+	 * path as midlayer does a get_cpu to glue us in. Flush
+	 * out the invalidate queue so we can see the updated
+	 * value for flag.
+	 */
+	smp_rmb();
+
+	if (READ_ONCE(eq->mode) == LPFC_EQ_POLL)
+		/* We will not likely get the completion for the caller
+		 * during this iteration but i guess that's fine.
+		 * Future io's coming on this eq should be able to
+		 * pick it up.  As for the case of single io's, they
+		 * will be handled through a sched from polling timer
+		 * function which is currently triggered every 1msec.
+		 */
+		lpfc_sli4_process_eq(phba, eq, LPFC_QUEUE_NOARM);
+}
+
 /**
  * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
@@ -11309,7 +11333,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 		rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
 		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 
-		lpfc_sli4_poll_eq(eq, LPFC_POLL_FASTPATH);
+		lpfc_sli4_poll_eq(eq);
 	} else {
 		/* For now, SLI2/3 will still use hbalock */
 		spin_lock_irqsave(&phba->hbalock, iflags);
@@ -15625,12 +15649,11 @@ void lpfc_sli4_poll_hbtimer(struct timer_list *t)
 {
 	struct lpfc_hba *phba = from_timer(phba, t, cpuhp_poll_timer);
 	struct lpfc_queue *eq;
-	int i = 0;
 
 	rcu_read_lock();
 
 	list_for_each_entry_rcu(eq, &phba->poll_list, _poll_list)
-		i += lpfc_sli4_poll_eq(eq, LPFC_POLL_SLOWPATH);
+		lpfc_sli4_poll_eq(eq);
 	if (!list_empty(&phba->poll_list))
 		mod_timer(&phba->cpuhp_poll_timer,
 			  jiffies + msecs_to_jiffies(LPFC_POLL_HB));
@@ -15638,33 +15661,6 @@ void lpfc_sli4_poll_hbtimer(struct timer_list *t)
 	rcu_read_unlock();
 }
 
-inline int lpfc_sli4_poll_eq(struct lpfc_queue *eq, uint8_t path)
-{
-	struct lpfc_hba *phba = eq->phba;
-	int i = 0;
-
-	/*
-	 * Unlocking an irq is one of the entry point to check
-	 * for re-schedule, but we are good for io submission
-	 * path as midlayer does a get_cpu to glue us in. Flush
-	 * out the invalidate queue so we can see the updated
-	 * value for flag.
-	 */
-	smp_rmb();
-
-	if (READ_ONCE(eq->mode) == LPFC_EQ_POLL)
-		/* We will not likely get the completion for the caller
-		 * during this iteration but i guess that's fine.
-		 * Future io's coming on this eq should be able to
-		 * pick it up.  As for the case of single io's, they
-		 * will be handled through a sched from polling timer
-		 * function which is currently triggered every 1msec.
-		 */
-		i = lpfc_sli4_process_eq(phba, eq, LPFC_QUEUE_NOARM);
-
-	return i;
-}
-
 static inline void lpfc_sli4_add_to_poll_list(struct lpfc_queue *eq)
 {
 	struct lpfc_hba *phba = eq->phba;
@@ -20819,6 +20815,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 	struct lpfc_mbx_wr_object *wr_object;
 	LPFC_MBOXQ_t *mbox;
 	int rc = 0, i = 0;
+	int mbox_status = 0;
 	uint32_t shdr_status, shdr_add_status, shdr_add_status_2;
 	uint32_t shdr_change_status = 0, shdr_csf = 0;
 	uint32_t mbox_tmo;
@@ -20864,11 +20861,15 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 	wr_object->u.request.bde_count = i;
 	bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written);
 	if (!phba->sli4_hba.intr_enable)
-		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+		mbox_status = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
 	else {
 		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
-		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+		mbox_status = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
 	}
+
+	/* The mbox status needs to be maintained to detect MBOX_TIMEOUT. */
+	rc = mbox_status;
+
 	/* The IOCTL status is embedded in the mailbox subheader. */
 	shdr_status = bf_get(lpfc_mbox_hdr_status,
 			     &wr_object->header.cfg_shdr.response);
@@ -20883,10 +20884,6 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 				  &wr_object->u.response);
 	}
 
-	if (!phba->sli4_hba.intr_enable)
-		mempool_free(mbox, phba->mbox_mem_pool);
-	else if (rc != MBX_TIMEOUT)
-		mempool_free(mbox, phba->mbox_mem_pool);
 	if (shdr_status || shdr_add_status || shdr_add_status_2 || rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 				"3025 Write Object mailbox failed with "
@@ -20904,6 +20901,12 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 		lpfc_log_fw_write_cmpl(phba, shdr_status, shdr_add_status,
 				       shdr_add_status_2, shdr_change_status,
 				       shdr_csf);
+
+	if (!phba->sli4_hba.intr_enable)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	else if (mbox_status != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+
 	return rc;
 }
 
@@ -21276,7 +21279,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
 		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
 		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 
-		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		lpfc_sli4_poll_eq(qp->hba_eq);
 		return 0;
 	}
 
@@ -21298,7 +21301,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
 		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
 		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 
-		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		lpfc_sli4_poll_eq(qp->hba_eq);
 		return 0;
 	}
 
@@ -21328,7 +21331,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
 		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
 		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 
-		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		lpfc_sli4_poll_eq(qp->hba_eq);
 		return 0;
 	}
 	return WQE_ERROR;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index f927c2a25d54..3b62c4032c31 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2009-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -291,8 +291,9 @@ struct lpfc_sli4_link {
 	uint8_t type;
 	uint8_t number;
 	uint8_t fault;
-	uint32_t logical_speed;
+	uint8_t link_status;
 	uint16_t topology;
+	uint32_t logical_speed;
 };
 
 struct lpfc_fcf_rec {
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 41a1128f8651..0238208cdd11 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -20,7 +20,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "14.2.0.9"
+#define LPFC_DRIVER_VERSION "14.2.0.10"
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
@@ -32,6 +32,6 @@
 
 #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
 		LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright (C) 2017-2022 Broadcom. All Rights " \
+#define LPFC_COPYRIGHT "Copyright (C) 2017-2023 Broadcom. All Rights " \
 		"Reserved. The term \"Broadcom\" refers to Broadcom Inc. " \
 		"and/or its subsidiaries."
diff --git a/drivers/scsi/lpfc/lpfc_vmid.c b/drivers/scsi/lpfc/lpfc_vmid.c
index ed1d7f7b88a3..cf8ba840d0ea 100644
--- a/drivers/scsi/lpfc/lpfc_vmid.c
+++ b/drivers/scsi/lpfc/lpfc_vmid.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -284,3 +284,42 @@ int lpfc_vmid_get_appid(struct lpfc_vport *vport, char *uuid,
 	}
 	return rc;
 }
+
+/*
+ * lpfc_reinit_vmid - reinitializes the vmid data structure
+ * @vport: pointer to vport data structure
+ *
+ * This routine reinitializes the vmid post flogi completion
+ *
+ * Return codes
+ *	None
+ */
+void
+lpfc_reinit_vmid(struct lpfc_vport *vport)
+{
+	u32 bucket, i, cpu;
+	struct lpfc_vmid *cur;
+	struct lpfc_vmid *vmp = NULL;
+	struct hlist_node *tmp;
+
+	write_lock(&vport->vmid_lock);
+	vport->cur_vmid_cnt = 0;
+
+	for (i = 0; i < vport->max_vmid; i++) {
+		vmp = &vport->vmid[i];
+		vmp->flag = LPFC_VMID_SLOT_FREE;
+		memset(vmp->host_vmid, 0, sizeof(vmp->host_vmid));
+		vmp->io_rd_cnt = 0;
+		vmp->io_wr_cnt = 0;
+
+		if (vmp->last_io_time)
+			for_each_possible_cpu(cpu)
+				*per_cpu_ptr(vmp->last_io_time, cpu) = 0;
+	}
+
+	/* for all elements in the hash table */
+	if (!hash_empty(vport->hash_table))
+		hash_for_each_safe(vport->hash_table, bucket, tmp, cur, hnode)
+			hash_del(&cur->hnode);
+	write_unlock(&vport->vmid_lock);
+}
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 4d171f5c213f..6c7559cf1a4b 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -534,7 +534,7 @@ disable_vport(struct fc_vport *fc_vport)
 {
 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
+	struct lpfc_nodelist *ndlp = NULL;
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
 	/* Can't disable during an outstanding delete. */
@@ -546,17 +546,7 @@ disable_vport(struct fc_vport *fc_vport)
 		(void)lpfc_send_npiv_logo(vport, ndlp);
 
 	lpfc_sli_host_down(vport);
-
-	/* Mark all nodes for discovery so we can remove them by
-	 * calling lpfc_cleanup_rpis(vport, 1)
-	 */
-	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
-		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
-			continue;
-		lpfc_disc_state_machine(vport, ndlp, NULL,
-					NLP_EVT_DEVICE_RECOVERY);
-	}
-	lpfc_cleanup_rpis(vport, 1);
+	lpfc_cleanup_rpis(vport, 0);
 
 	lpfc_stop_vport_timers(vport);
 	lpfc_unreg_all_rpis(vport);