diff options
| author | Hugo Villeneuve <hvilleneuve@dimonoff.com> | 2023-12-11 20:13:49 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-12-15 16:20:28 +0300 |
| commit | f6959c5217bd799bcb770b95d3c09b3244e175c6 (patch) | |
| tree | 61641cd6d98d45d7fa9dae8e5236b8713f2698b0 /drivers/tty/serial | |
| parent | 6bcab3c8acc88e265c570dea969fd04f137c8a4c (diff) | |
| download | linux-f6959c5217bd799bcb770b95d3c09b3244e175c6.tar.xz | |
serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.
Also add a comment to that effect in probe function.
Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/sc16is7xx.c | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 8d1de4982b65..a4ad3ae8cae2 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -334,7 +334,6 @@ struct sc16is7xx_one { struct sc16is7xx_port { const struct sc16is7xx_devtype *devtype; - struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; @@ -1434,7 +1433,8 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s) /* * Configure ports designated to operate as modem control lines. */ -static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s) +static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s, + struct regmap *regmap) { int i; int ret; @@ -1463,7 +1463,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s) if (s->mctrl_mask) regmap_update_bits( - s->regmap, + regmap, SC16IS7XX_IOCONTROL_REG, SC16IS7XX_IOCONTROL_MODEM_A_BIT | SC16IS7XX_IOCONTROL_MODEM_B_BIT, s->mctrl_mask); @@ -1495,6 +1495,10 @@ static int sc16is7xx_probe(struct device *dev, * This device does not have an identification register that would * tell us if we are really connected to the correct device. * The best we can do is to check if communication is at all possible. + * + * Note: regmap[0] is used in the probe function to access registers + * common to all channels/ports, as it is guaranteed to be present on + * all variants. */ ret = regmap_read(regmaps[0], SC16IS7XX_LSR_REG, &val); if (ret < 0) @@ -1530,7 +1534,6 @@ static int sc16is7xx_probe(struct device *dev, return -EINVAL; } - s->regmap = regmaps[0]; s->devtype = devtype; dev_set_drvdata(dev, s); mutex_init(&s->efr_lock); @@ -1545,7 +1548,7 @@ static int sc16is7xx_probe(struct device *dev, sched_set_fifo(s->kworker_task); /* reset device, purging any pending irq / data */ - regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG, + regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { @@ -1616,7 +1619,7 @@ static int sc16is7xx_probe(struct device *dev, sc16is7xx_setup_irda_ports(s); - ret = sc16is7xx_setup_mctrl_ports(s); + ret = sc16is7xx_setup_mctrl_ports(s, regmaps[0]); if (ret) goto out_ports; |