Merge tag 'm68k-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

 - fix WARNING splat in pmac_zilog driver

 - fix ADB input device regression

 - assume maintainership for adb-iop and via-macii

 - minor fixes and improvements

 - defconfig updates

* tag 'm68k-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  MAINTAINERS: Update m68k Mac entry
  macintosh/adb-iop: Send correct poll command
  macintosh/adb-iop: Always wait for reply message from IOP
  m68k: Fix WARNING splat in pmac_zilog driver
  m68k: Add a missing ELF_DETAILS in link script
  m68k: Drop redundant NOTES in link script
  m68k: mac: Update Kconfig help
  m68k: mac: Remove redundant VIA register writes
  m68k: mac: Remove dead code
  m68k: mac: Refactor iop_preinit() and iop_init()
  m68k: defconfig: Enable KUnit tests
  m68k: defconfig: Update defconfigs for v5.10-rc1
  m68k: Remove unused mach_max_dma_address
  m68k: Avoid xchg() warning

2 files changed, 47 insertions, 23 deletions

diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c
index f3d1a460fbce..0ee327249150 100644
--- a/drivers/macintosh/adb-iop.c
+++ b/drivers/macintosh/adb-iop.c
@@ -25,6 +25,7 @@
 static struct adb_request *current_req;
 static struct adb_request *last_req;
 static unsigned int autopoll_devs;
+static u8 autopoll_addr;
 
 static enum adb_iop_state {
 	idle,
@@ -41,6 +42,11 @@ static int adb_iop_autopoll(int);
 static void adb_iop_poll(void);
 static int adb_iop_reset_bus(void);
 
+/* ADB command byte structure */
+#define ADDR_MASK       0xF0
+#define OP_MASK         0x0C
+#define TALK            0x0C
+
 struct adb_driver adb_iop_driver = {
 	.name         = "ISM IOP",
 	.probe        = adb_iop_probe,
@@ -78,10 +84,7 @@ static void adb_iop_complete(struct iop_msg *msg)
 
 	local_irq_save(flags);
 
-	if (current_req->reply_expected)
-		adb_iop_state = awaiting_reply;
-	else
-		adb_iop_done();
+	adb_iop_state = awaiting_reply;
 
 	local_irq_restore(flags);
 }
@@ -89,38 +92,52 @@ static void adb_iop_complete(struct iop_msg *msg)
 /*
  * Listen for ADB messages from the IOP.
  *
- * This will be called when unsolicited messages (usually replies to TALK
- * commands or autopoll packets) are received.
+ * This will be called when unsolicited IOP messages are received.
+ * These IOP messages can carry ADB autopoll responses and also occur
+ * after explicit ADB commands.
  */
 
 static void adb_iop_listen(struct iop_msg *msg)
 {
 	struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
+	u8 addr = (amsg->cmd & ADDR_MASK) >> 4;
+	u8 op = amsg->cmd & OP_MASK;
 	unsigned long flags;
 	bool req_done = false;
 
 	local_irq_save(flags);
 
-	/* Handle a timeout. Timeout packets seem to occur even after
-	 * we've gotten a valid reply to a TALK, presumably because of
-	 * autopolling.
+	/* Responses to Talk commands may be unsolicited as they are
+	 * produced when the IOP polls devices. They are mostly timeouts.
 	 */
-
-	if (amsg->flags & ADB_IOP_EXPLICIT) {
+	if (op == TALK && ((1 << addr) & autopoll_devs))
+		autopoll_addr = addr;
+
+	switch (amsg->flags & (ADB_IOP_EXPLICIT |
+			       ADB_IOP_AUTOPOLL |
+			       ADB_IOP_TIMEOUT)) {
+	case ADB_IOP_EXPLICIT:
+	case ADB_IOP_EXPLICIT | ADB_IOP_TIMEOUT:
 		if (adb_iop_state == awaiting_reply) {
 			struct adb_request *req = current_req;
 
-			req->reply_len = amsg->count + 1;
-			memcpy(req->reply, &amsg->cmd, req->reply_len);
+			if (req->reply_expected) {
+				req->reply_len = amsg->count + 1;
+				memcpy(req->reply, &amsg->cmd, req->reply_len);
+			}
 
 			req_done = true;
 		}
-	} else if (!(amsg->flags & ADB_IOP_TIMEOUT)) {
-		adb_input(&amsg->cmd, amsg->count + 1,
-			  amsg->flags & ADB_IOP_AUTOPOLL);
+		break;
+	case ADB_IOP_AUTOPOLL:
+		if (((1 << addr) & autopoll_devs) &&
+		    amsg->cmd == ADB_READREG(addr, 0))
+			adb_input(&amsg->cmd, amsg->count + 1, 1);
+		break;
 	}
-
-	msg->reply[0] = autopoll_devs ? ADB_IOP_AUTOPOLL : 0;
+	msg->reply[0] = autopoll_addr ? ADB_IOP_AUTOPOLL : 0;
+	msg->reply[1] = 0;
+	msg->reply[2] = autopoll_addr ? ADB_READREG(autopoll_addr, 0) : 0;
 	iop_complete_message(msg);
 
 	if (req_done)
@@ -233,6 +250,9 @@ static void adb_iop_set_ap_complete(struct iop_msg *msg)
 	struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
 
 	autopoll_devs = (amsg->data[1] << 8) | amsg->data[0];
+	if (autopoll_devs & (1 << autopoll_addr))
+		return;
+	autopoll_addr = autopoll_devs ? (ffs(autopoll_devs) - 1) : 0;
 }
 
 static int adb_iop_autopoll(int devs)
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 063484b22523..d6aef8a1f0a4 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1693,22 +1693,26 @@ static int __init pmz_probe(void)
 
 #else
 
+/* On PCI PowerMacs, pmz_probe() does an explicit search of the OpenFirmware
+ * tree to obtain the device_nodes needed to start the console before the
+ * macio driver. On Macs without OpenFirmware, global platform_devices take
+ * the place of those device_nodes.
+ */
 extern struct platform_device scc_a_pdev, scc_b_pdev;
 
 static int __init pmz_init_port(struct uart_pmac_port *uap)
 {
-	struct resource *r_ports;
-	int irq;
+	struct resource *r_ports, *r_irq;
 
 	r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(uap->pdev, 0);
-	if (!r_ports || irq <= 0)
+	r_irq = platform_get_resource(uap->pdev, IORESOURCE_IRQ, 0);
+	if (!r_ports || !r_irq)
 		return -ENODEV;
 
 	uap->port.mapbase  = r_ports->start;
 	uap->port.membase  = (unsigned char __iomem *) r_ports->start;
 	uap->port.iotype   = UPIO_MEM;
-	uap->port.irq      = irq;
+	uap->port.irq      = r_irq->start;
 	uap->port.uartclk  = ZS_CLOCK;
 	uap->port.fifosize = 1;
 	uap->port.ops      = &pmz_pops;