Merge tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a number of updates for devicetree files for Qualcomm,
  Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
  contents:

   - Wrong GPIO polarity on some boards

   - Lower SD card interface speed for better stability

   - Incorrect power supply, clock, pmic, cache properties

   - Disable broken hbr3 on sc7280-herobrine

   - Devicetree warning fixes

  The only other changes are:

   - A regression fix for the Amlogic performance monitoring unit
     driver, along with two related DT changes.

   - imx_v6_v7_defconfig enables PCI support again.

   - Trivial fixes for tee, optee and psci firmware drivers, addressing
     compiler warning and error output"

* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  firmware/psci: demote suspend-mode warning to info level
  arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
  ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
  arm64: dts: rockchip: correct panel supplies on some rk3326 boards
  arm64: dts: rockchip: use just "port" in panel on RockPro64
  arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
  ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
  ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
  arm64: dts: imx8mp-verdin: correct off-on-delay
  arm64: dts: imx8mm-verdin: correct off-on-delay
  arm64: dts: imx8mm-evk: correct pmic clock source
  arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
  arm64: dts: rockchip: Remove non-existing pwm-delay-us property
  arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
  tee: Pass a pointer to virt_to_page()
  perf/amlogic: adjust register offsets
  arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
  arm64: dts: meson-g12-common: specify full DMC range
  arm64: dts: imx8mp: fix address length for LCDIF2
  riscv: dts: canaan: drop invalid spi-max-frequency
  ...

4 files changed, 21 insertions, 20 deletions

diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
index 29619f49873a..d9629ff87861 100644
--- a/drivers/firmware/psci/psci.c
+++ b/drivers/firmware/psci/psci.c
@@ -167,7 +167,8 @@ int psci_set_osi_mode(bool enable)
 
 	err = invoke_psci_fn(PSCI_1_0_FN_SET_SUSPEND_MODE, suspend_mode, 0, 0);
 	if (err < 0)
-		pr_warn("failed to set %s mode: %d\n", enable ? "OSI" : "PC", err);
+		pr_info(FW_BUG "failed to set %s mode: %d\n",
+				enable ? "OSI" : "PC", err);
 	return psci_to_linux_errno(err);
 }
 
diff --git a/drivers/perf/amlogic/meson_g12_ddr_pmu.c b/drivers/perf/amlogic/meson_g12_ddr_pmu.c
index a78fdb15e26c..8b643888d503 100644
--- a/drivers/perf/amlogic/meson_g12_ddr_pmu.c
+++ b/drivers/perf/amlogic/meson_g12_ddr_pmu.c
@@ -21,23 +21,23 @@
 #define DMC_QOS_IRQ		BIT(30)
 
 /* DMC bandwidth monitor register address offset */
-#define DMC_MON_G12_CTRL0		(0x20  << 2)
-#define DMC_MON_G12_CTRL1		(0x21  << 2)
-#define DMC_MON_G12_CTRL2		(0x22  << 2)
-#define DMC_MON_G12_CTRL3		(0x23  << 2)
-#define DMC_MON_G12_CTRL4		(0x24  << 2)
-#define DMC_MON_G12_CTRL5		(0x25  << 2)
-#define DMC_MON_G12_CTRL6		(0x26  << 2)
-#define DMC_MON_G12_CTRL7		(0x27  << 2)
-#define DMC_MON_G12_CTRL8		(0x28  << 2)
-
-#define DMC_MON_G12_ALL_REQ_CNT		(0x29  << 2)
-#define DMC_MON_G12_ALL_GRANT_CNT	(0x2a  << 2)
-#define DMC_MON_G12_ONE_GRANT_CNT	(0x2b  << 2)
-#define DMC_MON_G12_SEC_GRANT_CNT	(0x2c  << 2)
-#define DMC_MON_G12_THD_GRANT_CNT	(0x2d  << 2)
-#define DMC_MON_G12_FOR_GRANT_CNT	(0x2e  << 2)
-#define DMC_MON_G12_TIMER		(0x2f  << 2)
+#define DMC_MON_G12_CTRL0		(0x0  << 2)
+#define DMC_MON_G12_CTRL1		(0x1  << 2)
+#define DMC_MON_G12_CTRL2		(0x2  << 2)
+#define DMC_MON_G12_CTRL3		(0x3  << 2)
+#define DMC_MON_G12_CTRL4		(0x4  << 2)
+#define DMC_MON_G12_CTRL5		(0x5  << 2)
+#define DMC_MON_G12_CTRL6		(0x6  << 2)
+#define DMC_MON_G12_CTRL7		(0x7  << 2)
+#define DMC_MON_G12_CTRL8		(0x8  << 2)
+
+#define DMC_MON_G12_ALL_REQ_CNT		(0x9  << 2)
+#define DMC_MON_G12_ALL_GRANT_CNT	(0xa  << 2)
+#define DMC_MON_G12_ONE_GRANT_CNT	(0xb  << 2)
+#define DMC_MON_G12_SEC_GRANT_CNT	(0xc  << 2)
+#define DMC_MON_G12_THD_GRANT_CNT	(0xd  << 2)
+#define DMC_MON_G12_FOR_GRANT_CNT	(0xe  << 2)
+#define DMC_MON_G12_TIMER		(0xf  << 2)
 
 /* Each bit represent a axi line */
 PMU_FORMAT_ATTR(event, "config:0-7");
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
index 290b1bb0e9cd..df5fb5410b72 100644
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -488,7 +488,7 @@ static bool is_normal_memory(pgprot_t p)
 #elif defined(CONFIG_ARM64)
 	return (pgprot_val(p) & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL);
 #else
-#error "Unuspported architecture"
+#error "Unsupported architecture"
 #endif
 }
 
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c
index b1c6231defad..673cf0359494 100644
--- a/drivers/tee/tee_shm.c
+++ b/drivers/tee/tee_shm.c
@@ -32,7 +32,7 @@ static int shm_get_kernel_pages(unsigned long start, size_t page_count,
 			 is_kmap_addr((void *)start)))
 		return -EINVAL;
 
-	page = virt_to_page(start);
+	page = virt_to_page((void *)start);
 	for (n = 0; n < page_count; n++) {
 		pages[n] = page + n;
 		get_page(pages[n]);