summaryrefslogtreecommitdiff
path: root/sound/soc/blackfin
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2014-02-17 16:16:54 +0400
committerMark Brown <broonie@linaro.org>2014-02-18 05:04:37 +0400
commit6c3d713e6d32706999689e379a9098afb4cd8a2c (patch)
tree7f26da80df69fbd48f53835924be036f161f63f3 /sound/soc/blackfin
parent38dbfb59d1175ef458d006556061adeaa8751b72 (diff)
downloadlinux-6c3d713e6d32706999689e379a9098afb4cd8a2c.tar.xz
ASoC: ad193x: Split SPI and I2C code into different modules
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only I2C can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus driver to continue without problems if one of them fails. This patch splits the AD193X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'sound/soc/blackfin')
-rw-r--r--sound/soc/blackfin/Kconfig3
1 files changed, 2 insertions, 1 deletions
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index 54f74f8cbb75..359136777c4d 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -68,7 +68,8 @@ config SND_BF5XX_SOC_AD193X
tristate "SoC AD193X Audio support for Blackfin"
depends on SND_BF5XX_I2S
select SND_BF5XX_SOC_I2S
- select SND_SOC_AD193X
+ select SND_SOC_AD193X_I2C if I2C
+ select SND_SOC_AD193X_SPI if SPI_MASTER
help
Say Y if you want to add support for AD193X codec on Blackfin.
This driver supports AD1936, AD1937, AD1938 and AD1939.