diff options
author | Geoffrey D. Bennett <g@b4.vu> | 2021-06-22 20:01:52 +0300 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2021-06-22 22:42:24 +0300 |
commit | 303f204e83526d8f83220f41ba93b5af796bc323 (patch) | |
tree | 93e7b3ef3db4edc51e635fe67b7cf7bef47cea56 /sound/usb/mixer_scarlett_gen2.c | |
parent | a5b3612305b221425a7e2244d0620b9c4ebf25ed (diff) | |
download | linux-303f204e83526d8f83220f41ba93b5af796bc323.tar.xz |
ALSA: usb-audio: scarlett2: Add Gen 3 MSD mode switch
Add a control to disable the Gen 3 MSD mode so that the full
functionality of the device is available. Don't create the other
controls until MSD mode is disabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/1cb93bbe585f6b0a74f5dc27450bc87e1f3776dc.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/usb/mixer_scarlett_gen2.c')
-rw-r--r-- | sound/usb/mixer_scarlett_gen2.c | 120 |
1 files changed, 117 insertions, 3 deletions
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 06454d4e58bf..f35420369042 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -44,12 +44,13 @@ * interface during driver initialisation added in May 2021 (thanks to * Vladimir Sadovnikov for figuring out how). * - * This ALSA mixer gives access to: + * This ALSA mixer gives access to (model-dependent): * - input, output, mixer-matrix muxes * - mixer-matrix gain stages * - gain/volume/mute controls * - level meters * - line/inst level and pad controls + * - disable/enable MSD mode * * <ditaa> * /--------------\ 18chn 20chn /--------------\ @@ -102,6 +103,14 @@ * \--------------/ * </ditaa> * + * Gen 3 devices have a Mass Storage Device (MSD) mode where a small + * disk with registration and driver download information is presented + * to the host. To access the full functionality of the device without + * proprietary software, MSD mode can be disabled by: + * - holding down the 48V button for five seconds while powering on + * the device, or + * - using this driver and alsamixer to change the "MSD Mode" setting + * to Off and power-cycling the device */ #include <linux/slab.h> @@ -120,6 +129,9 @@ /* device_setup value to enable */ #define SCARLETT2_ENABLE 0x01 +/* device_setup value to allow turning MSD mode back on */ +#define SCARLETT2_MSD_ENABLE 0x02 + /* some gui mixers can't handle negative ctl values */ #define SCARLETT2_VOLUME_BIAS 127 @@ -279,6 +291,12 @@ struct scarlett2_mux_entry { struct scarlett2_device_info { u32 usb_id; /* USB device identifier */ + /* Gen 3 devices have an internal MSD mode switch that needs + * to be disabled in order to access the full functionality of + * the device. + */ + u8 has_msd_mode; + /* line out hw volume is sw controlled */ u8 line_out_hw_vol; @@ -327,6 +345,7 @@ struct scarlett2_data { u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX]; u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX]; u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT]; + u8 msd_switch; struct snd_kcontrol *sync_ctl; struct snd_kcontrol *master_vol_ctl; struct snd_kcontrol *vol_ctls[SCARLETT2_ANALOGUE_MAX]; @@ -489,6 +508,7 @@ static const struct scarlett2_device_info s18i20_gen2_info = { static const struct scarlett2_device_info s4i4_gen3_info = { .usb_id = USB_ID(0x1235, 0x8212), + .has_msd_mode = 1, .level_input_count = 2, .pad_input_count = 2, @@ -530,6 +550,7 @@ static const struct scarlett2_device_info s4i4_gen3_info = { static const struct scarlett2_device_info s8i6_gen3_info = { .usb_id = USB_ID(0x1235, 0x8213), + .has_msd_mode = 1, .level_input_count = 2, .pad_input_count = 2, @@ -578,6 +599,7 @@ static const struct scarlett2_device_info s8i6_gen3_info = { static const struct scarlett2_device_info s18i8_gen3_info = { .usb_id = USB_ID(0x1235, 0x8214), + .has_msd_mode = 1, .line_out_hw_vol = 1, .level_input_count = 2, .pad_input_count = 2, @@ -639,6 +661,7 @@ static const struct scarlett2_device_info s18i8_gen3_info = { static const struct scarlett2_device_info s18i20_gen3_info = { .usb_id = USB_ID(0x1235, 0x8215), + .has_msd_mode = 1, .line_out_hw_vol = 1, .level_input_count = 2, .pad_input_count = 8, @@ -786,7 +809,8 @@ enum { SCARLETT2_CONFIG_SW_HW_SWITCH = 3, SCARLETT2_CONFIG_LEVEL_SWITCH = 4, SCARLETT2_CONFIG_PAD_SWITCH = 5, - SCARLETT2_CONFIG_COUNT = 6 + SCARLETT2_CONFIG_MSD_SWITCH = 6, + SCARLETT2_CONFIG_COUNT = 7 }; /* Location, size, and activation command number for the configuration @@ -817,6 +841,9 @@ static const struct scarlett2_config [SCARLETT2_CONFIG_PAD_SWITCH] = { .offset = 0x84, .size = 1, .activate = 8 }, + + [SCARLETT2_CONFIG_MSD_SWITCH] = { + .offset = 0x9d, .size = 1, .activate = 6 }, }; /* proprietary request/response format */ @@ -1016,7 +1043,8 @@ static int scarlett2_usb_set_config( return err; /* Schedule the change to be written to NVRAM */ - schedule_delayed_work(&private->work, msecs_to_jiffies(2000)); + if (config_item->activate != SCARLETT2_USB_CONFIG_SAVE) + schedule_delayed_work(&private->work, msecs_to_jiffies(2000)); return 0; } @@ -2351,6 +2379,71 @@ static int scarlett2_add_meter_ctl(struct usb_mixer_interface *mixer) "Level Meter", NULL); } +/*** MSD Controls ***/ + +static int scarlett2_msd_ctl_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct scarlett2_data *private = elem->head.mixer->private_data; + + ucontrol->value.integer.value[0] = private->msd_switch; + return 0; +} + +static int scarlett2_msd_ctl_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct usb_mixer_interface *mixer = elem->head.mixer; + struct scarlett2_data *private = mixer->private_data; + + int oval, val, err = 0; + + mutex_lock(&private->data_mutex); + + oval = private->msd_switch; + val = !!ucontrol->value.integer.value[0]; + + if (oval == val) + goto unlock; + + private->msd_switch = val; + + /* Send switch change to the device */ + err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_MSD_SWITCH, + 0, val); + +unlock: + mutex_unlock(&private->data_mutex); + return err; +} + +static const struct snd_kcontrol_new scarlett2_msd_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "", + .info = snd_ctl_boolean_mono_info, + .get = scarlett2_msd_ctl_get, + .put = scarlett2_msd_ctl_put, +}; + +static int scarlett2_add_msd_ctl(struct usb_mixer_interface *mixer) +{ + struct scarlett2_data *private = mixer->private_data; + const struct scarlett2_device_info *info = private->info; + + if (!info->has_msd_mode) + return 0; + + /* If MSD mode is off, hide the switch by default */ + if (!private->msd_switch && !(mixer->chip->setup & SCARLETT2_MSD_ENABLE)) + return 0; + + /* Add MSD control */ + return scarlett2_add_new_ctl(mixer, &scarlett2_msd_ctl, + 0, 1, "MSD Mode", NULL); +} + /*** Cleanup/Suspend Callbacks ***/ static void scarlett2_private_free(struct usb_mixer_interface *mixer) @@ -2488,6 +2581,18 @@ static int scarlett2_read_configs(struct usb_mixer_interface *mixer) struct scarlett2_usb_volume_status volume_status; int err, i; + if (info->has_msd_mode) { + err = scarlett2_usb_get_config( + mixer, SCARLETT2_CONFIG_MSD_SWITCH, + 1, &private->msd_switch); + if (err < 0) + return err; + + /* no other controls are created if MSD mode is on */ + if (private->msd_switch) + return 0; + } + err = scarlett2_update_input_other(mixer); if (err < 0) return err; @@ -2710,6 +2815,15 @@ static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer) if (err < 0) return err; + /* Create the MSD control */ + err = scarlett2_add_msd_ctl(mixer); + if (err < 0) + return err; + + /* If MSD mode is enabled, don't create any other controls */ + if (((struct scarlett2_data *)mixer->private_data)->msd_switch) + return 0; + /* Create the analogue output controls */ err = scarlett2_add_line_out_ctls(mixer); if (err < 0) |