summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c61
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c164
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.h2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c13
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c16
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h4
6 files changed, 102 insertions, 158 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index badcf821d89a..42537336110c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -324,24 +324,33 @@ out:
/**
* ixgbe_fc_enable_82598 - Enable flow control
* @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
*
* Enable flow control according to the current settings.
**/
-static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
u32 fctrl_reg;
u32 rmcs_reg;
u32 reg;
+ u32 fcrtl, fcrth;
u32 link_speed = 0;
+ int i;
bool link_up;
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc)
+ /*
+ * Validate the water mark configuration for packet buffer 0. Zero
+ * water marks indicate that the packet buffer was not configured
+ * and the watermarks for packet buffer 0 should always be configured.
+ */
+ if (!hw->fc.low_water ||
+ !hw->fc.high_water[0] ||
+ !hw->fc.pause_time) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
+ }
-#endif /* CONFIG_DCB */
/*
* On 82598 having Rx FC on causes resets while doing 1G
* so if it's on turn it off once we know link_speed. For
@@ -380,9 +389,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
* 2: Tx flow control is enabled (we can send pause frames but
* we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
* other: Invalid.
*/
switch (hw->fc.current_mode) {
@@ -415,11 +421,6 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
fctrl_reg |= IXGBE_FCTRL_RFCE;
rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
- break;
-#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
ret_val = IXGBE_ERR_CONFIG;
@@ -432,29 +433,29 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
- /* Set up and enable Rx high/low water mark thresholds, enable XON. */
- if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
- reg = hw->fc.low_water << 6;
- if (hw->fc.send_xon)
- reg |= IXGBE_FCRTL_XONE;
+ fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
-
- reg = hw->fc.high_water[packetbuf_num] << 6;
- reg |= IXGBE_FCRTH_FCEN;
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+ }
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
}
/* Configure pause time (2 TCs per register) */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
- if ((packetbuf_num & 1) == 0)
- reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
- else
- reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
+ reg = hw->fc.pause_time * 0x00010001;
+ for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
out:
return ret_val;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 3035f1938f5b..c7e51b85b8b6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -84,39 +84,12 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
*
* Called at init time to set up flow control.
**/
-static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
u32 reg = 0, reg_bp = 0;
u16 reg_cu = 0;
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc) {
- hw->fc.current_mode = hw->fc.requested_mode;
- goto out;
- }
-
-#endif /* CONFIG_DCB */
- /* Validate the packetbuf configuration */
- if (packetbuf_num < 0 || packetbuf_num > 7) {
- hw_dbg(hw, "Invalid packet buffer number [%d], expected range is 0-7\n",
- packetbuf_num);
- ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
- goto out;
- }
-
- /*
- * Validate the water mark configuration. Zero water marks are invalid
- * because it causes the controller to just blast out fc packets.
- */
- if (!hw->fc.low_water ||
- !hw->fc.high_water[packetbuf_num] ||
- !hw->fc.pause_time) {
- hw_dbg(hw, "Invalid water mark configuration\n");
- ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
- goto out;
- }
-
/*
* Validate the requested mode. Strict IEEE mode does not allow
* ixgbe_fc_rx_pause because it will cause us to fail at UNH.
@@ -139,21 +112,18 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
* HW will be able to do fc autoneg once the cable is plugged in. If
* we link at 10G, the 1G advertisement is harmless and vice versa.
*/
-
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
case ixgbe_media_type_backplane:
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC);
break;
-
case ixgbe_media_type_copper:
hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
MDIO_MMD_AN, &reg_cu);
break;
-
default:
- ;
+ break;
}
/*
@@ -164,9 +134,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
* 2: Tx flow control is enabled (we can send pause frames but
* we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
* other: Invalid.
*/
switch (hw->fc.requested_mode) {
@@ -179,51 +146,40 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
else if (hw->phy.media_type == ixgbe_media_type_copper)
reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
break;
- case ixgbe_fc_rx_pause:
- /*
- * Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
- if (hw->phy.media_type == ixgbe_media_type_backplane)
- reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
- IXGBE_AUTOC_ASM_PAUSE);
- else if (hw->phy.media_type == ixgbe_media_type_copper)
- reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
- break;
case ixgbe_fc_tx_pause:
/*
* Tx Flow control is enabled, and Rx Flow control is
* disabled by software override.
*/
- reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
- reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
+ reg |= IXGBE_PCS1GANA_ASM_PAUSE;
+ reg &= ~IXGBE_PCS1GANA_SYM_PAUSE;
if (hw->phy.media_type == ixgbe_media_type_backplane) {
- reg_bp |= (IXGBE_AUTOC_ASM_PAUSE);
- reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE);
+ reg_bp |= IXGBE_AUTOC_ASM_PAUSE;
+ reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE;
} else if (hw->phy.media_type == ixgbe_media_type_copper) {
- reg_cu |= (IXGBE_TAF_ASM_PAUSE);
- reg_cu &= ~(IXGBE_TAF_SYM_PAUSE);
+ reg_cu |= IXGBE_TAF_ASM_PAUSE;
+ reg_cu &= ~IXGBE_TAF_SYM_PAUSE;
}
break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE, as such we fall
+ * through to the fc_full statement. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
case ixgbe_fc_full:
/* Flow control (both Rx and Tx) is enabled by SW override. */
- reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+ reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE;
if (hw->phy.media_type == ixgbe_media_type_backplane)
- reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
- IXGBE_AUTOC_ASM_PAUSE);
+ reg_bp |= IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE;
else if (hw->phy.media_type == ixgbe_media_type_copper)
- reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
- break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
+ reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE;
break;
-#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
ret_val = IXGBE_ERR_CONFIG;
@@ -298,7 +254,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
IXGBE_WRITE_FLUSH(hw);
/* Setup flow control */
- ixgbe_setup_fc(hw, 0);
+ ixgbe_setup_fc(hw);
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
@@ -2126,28 +2082,36 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
/**
* ixgbe_fc_enable_generic - Enable flow control
* @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
*
* Enable flow control according to the current settings.
**/
-s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
u32 mflcn_reg, fccfg_reg;
u32 reg;
u32 fcrtl, fcrth;
+ int i;
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc)
+ /*
+ * Validate the water mark configuration for packet buffer 0. Zero
+ * water marks indicate that the packet buffer was not configured
+ * and the watermarks for packet buffer 0 should always be configured.
+ */
+ if (!hw->fc.low_water ||
+ !hw->fc.high_water[0] ||
+ !hw->fc.pause_time) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
goto out;
+ }
-#endif /* CONFIG_DCB */
/* Negotiate the fc mode to use */
ixgbe_fc_autoneg(hw);
/* Disable any previous flow control settings */
mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
+ mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
@@ -2160,9 +2124,6 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
* 2: Tx flow control is enabled (we can send pause frames but
* we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
* other: Invalid.
*/
switch (hw->fc.current_mode) {
@@ -2195,11 +2156,6 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
mflcn_reg |= IXGBE_MFLCN_RFCE;
fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
- break;
-#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
ret_val = IXGBE_ERR_CONFIG;
@@ -2212,34 +2168,34 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
- fcrtl = hw->fc.low_water << 10;
+ fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE;
- if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
- fcrth = hw->fc.high_water[packetbuf_num] << 10;
- fcrth |= IXGBE_FCRTH_FCEN;
- if (hw->fc.send_xon)
- fcrtl |= IXGBE_FCRTL_XONE;
- } else {
- /*
- * If Tx flow control is disabled, set our high water mark
- * to Rx FIFO size minus 32 in order prevent Tx switch
- * loopback from stalling on DMA.
- */
- fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num)) - 32;
- }
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
+ fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
+ /*
+ * In order to prevent Tx hangs when the internal Tx
+ * switch is enabled we must set the high water mark
+ * to the maximum FCRTH value. This allows the Tx
+ * switch to function even under heavy Rx workloads.
+ */
+ fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32;
+ }
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth);
+ }
/* Configure pause time (2 TCs per register) */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
- if ((packetbuf_num & 1) == 0)
- reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
- else
- reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
+ reg = hw->fc.pause_time * 0x00010001;
+ for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
out:
return ret_val;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index 9e8a1c05df6e..6222fdb3d3f1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -77,7 +77,7 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw);
s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw);
s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw);
void ixgbe_fc_autoneg(struct ixgbe_hw *hw);
s32 ixgbe_validate_mac_addr(u8 *mac_addr);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
index 888a419dc3d9..65913c5a616e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -278,18 +278,7 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc)
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
} else {
- /* X540 devices have a RX bit that should be cleared
- * if PFC is disabled on all TCs but PFC features is
- * enabled.
- */
- if (hw->mac.type == ixgbe_mac_X540) {
- reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- reg &= ~IXGBE_MFLCN_RPFCE_MASK;
- IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
- }
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- hw->mac.ops.fc_enable(hw, i);
+ hw->mac.ops.fc_enable(hw);
}
return 0;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c2ceda9133ba..b2daff3b3328 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -5250,7 +5250,7 @@ static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
u32 link_speed = adapter->link_speed;
bool link_up = adapter->link_up;
- int i;
+ bool pfc_en = adapter->dcb_cfg.pfc_mode_enable;
if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
return;
@@ -5262,14 +5262,12 @@ static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
link_speed = IXGBE_LINK_SPEED_10GB_FULL;
link_up = true;
}
- if (link_up) {
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- hw->mac.ops.fc_enable(hw, i);
- } else {
- hw->mac.ops.fc_enable(hw, 0);
- }
- }
+
+ if (adapter->ixgbe_ieee_pfc)
+ pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en);
+
+ if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en))
+ hw->mac.ops.fc_enable(hw);
if (link_up ||
time_after(jiffies, (adapter->link_check_timeout +
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 5337260bed5b..5e64c77255e9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1892,7 +1892,7 @@ enum {
#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */
#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
-#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF0 /* Receive FC Mask */
+#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF4 /* Receive FC Mask */
#define IXGBE_MFLCN_RPFCE_SHIFT 4
@@ -2808,7 +2808,7 @@ struct ixgbe_mac_operations {
void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
/* Flow Control */
- s32 (*fc_enable)(struct ixgbe_hw *, s32);
+ s32 (*fc_enable)(struct ixgbe_hw *);
/* Manageability interface */
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 09:40:30 +0300