diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt')
-rw-r--r-- | Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt deleted file mode 100644 index 3d5ce6ad6ec7..000000000000 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt +++ /dev/null @@ -1,49 +0,0 @@ -Ilitek ILI9322 TFT panel driver with SPI control bus - -This is a driver for 320x240 TFT panels, accepting a variety of input -streams that get adapted and scaled to the panel. The panel output has -960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and -VCOMH outputs. - -Required properties: - - compatible: "dlink,dir-685-panel", "ilitek,ili9322" - (full system-specific compatible is always required to look up configuration) - - reg: address of the panel on the SPI bus - -Optional properties: - - vcc-supply: core voltage supply, see regulator/regulator.txt - - iovcc-supply: voltage supply for the interface input/output signals, - see regulator/regulator.txt - - vci-supply: voltage supply for analog parts, see regulator/regulator.txt - - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt - - The following optional properties only apply to RGB and YUV input modes and - can be omitted for BT.656 input modes: - - - pixelclk-active: see display/panel/display-timing.txt - - de-active: see display/panel/display-timing.txt - - hsync-active: see display/panel/display-timing.txt - - vsync-active: see display/panel/display-timing.txt - -The panel must obey the rules for a SPI slave device as specified in -spi/spi-bus.txt - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in -media/video-interfaces.txt. This node should describe panel's video bus. - -Example: - -panel: display@0 { - compatible = "dlink,dir-685-panel", "ilitek,ili9322"; - reg = <0>; - vcc-supply = <&vdisp>; - iovcc-supply = <&vdisp>; - vci-supply = <&vdisp>; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; -}; |