diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/pwm-fan.txt')
-rw-r--r-- | Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 68 |
1 files changed, 1 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 4509e688623a..48886f0ce415 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -1,67 +1 @@ -Bindings for a fan connected to the PWM lines - -Required properties: -- compatible : "pwm-fan" -- pwms : the PWM that is used to control the PWM fan -- cooling-levels : PWM duty cycle values in a range from 0 to 255 - which correspond to thermal cooling states - -Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan -- interrupts : This contains an interrupt specifier for each fan - tachometer output connected to an interrupt source. - The output signal must generate a defined number of - interrupts per fan revolution, which require that - it must be self resetting edge interrupts. See - interrupt-controller/interrupts.txt for the format. -- pulses-per-revolution : define the number of pulses per fan revolution for - each tachometer input as an integer (default is 2 - interrupts per revolution). The value must be - greater than zero. - -Example: - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - pwms = <&pwm 0 10000 0>; - cooling-levels = <0 102 170 230>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - thermal-sensors = <&tmu 0>; - polling-delay-passive = <0>; - polling-delay = <0>; - trips { - cpu_alert1: cpu-alert1 { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 0 1>; - }; - }; - }; - -Example 2: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm 0 40000 0>; - fan-supply = <®_fan>; - interrupt-parent = <&gpio5>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>; - }; - -Example 3: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm1 0 25000 0>; - interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>, <1>; - }; +This file has moved to pwm-fan.yaml. |