summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/fsl-tsec-phy.txt')
-rw-r--r--Documentation/devicetree/bindings/net/fsl-tsec-phy.txt68
1 files changed, 1 insertions, 67 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 79bf352e659c..047bdf7bdd2f 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -86,70 +86,4 @@ Example:
* Gianfar PTP clock nodes
-General Properties:
-
- - compatible Should be "fsl,etsec-ptp"
- - reg Offset and length of the register set for the device
- - interrupts There should be at least two interrupts. Some devices
- have as many as four PTP related interrupts.
-
-Clock Properties:
-
- - fsl,cksel Timer reference clock source.
- - fsl,tclk-period Timer reference clock period in nanoseconds.
- - fsl,tmr-prsc Prescaler, divides the output clock.
- - fsl,tmr-add Frequency compensation value.
- - fsl,tmr-fiper1 Fixed interval period pulse generator.
- - fsl,tmr-fiper2 Fixed interval period pulse generator.
- - fsl,max-adj Maximum frequency adjustment in parts per billion.
-
- These properties set the operational parameters for the PTP
- clock. You must choose these carefully for the clock to work right.
- Here is how to figure good values:
-
- TimerOsc = selected reference clock MHz
- tclk_period = desired clock period nanoseconds
- NominalFreq = 1000 / tclk_period MHz
- FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
- tmr_add = ceil(2^32 / FreqDivRatio)
- OutputClock = NominalFreq / tmr_prsc MHz
- PulseWidth = 1 / OutputClock microseconds
- FiperFreq1 = desired frequency in Hz
- FiperDiv1 = 1000000 * OutputClock / FiperFreq1
- tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
- max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
-
- The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
- driver expects that tmr_fiper1 will be correctly set to produce a 1
- Pulse Per Second (PPS) signal, since this will be offered to the PPS
- subsystem to synchronize the Linux clock.
-
- Reference clock source is determined by the value, which is holded
- in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
- value, which will be directly written in those bits, that is why,
- according to reference manual, the next clock sources can be used:
-
- <0> - external high precision timer reference clock (TSEC_TMR_CLK
- input is used for this purpose);
- <1> - eTSEC system clock;
- <2> - eTSEC1 transmit clock;
- <3> - RTC clock input.
-
- When this attribute is not used, eTSEC system clock will serve as
- IEEE 1588 timer reference clock.
-
-Example:
-
- ptp_clock@24e00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <12 0x8 13 0x8>;
- interrupt-parent = < &ipic >;
- fsl,cksel = <1>;
- fsl,tclk-period = <10>;
- fsl,tmr-prsc = <100>;
- fsl,tmr-add = <0x999999A4>;
- fsl,tmr-fiper1 = <0x3B9AC9F6>;
- fsl,tmr-fiper2 = <0x00018696>;
- fsl,max-adj = <659999998>;
- };
+Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt