summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/phy/samsung-phy.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/phy/samsung-phy.txt')
-rw-r--r--Documentation/devicetree/bindings/phy/samsung-phy.txt210
1 files changed, 0 insertions, 210 deletions
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
deleted file mode 100644
index 8f51aee91101..000000000000
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ /dev/null
@@ -1,210 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
- - "samsung,s5pv210-mipi-video-phy"
- - "samsung,exynos5420-mipi-video-phy"
- - "samsung,exynos5433-mipi-video-phy"
-- #phy-cells : from the generic phy bindings, must be 1;
-
-In case of s5pv210 and exynos5420 compatible PHYs:
-- syscon - phandle to the PMU system controller
-
-In case of exynos5433 compatible PHY:
- - samsung,pmu-syscon - phandle to the PMU system controller
- - samsung,disp-sysreg - phandle to the DISP system registers controller
- - samsung,cam0-sysreg - phandle to the CAM0 system registers controller
- - samsung,cam1-sysreg - phandle to the CAM1 system registers controller
-
-For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
-the PHY specifier identifies the PHY and its meaning is as follows:
- 0 - MIPI CSIS 0,
- 1 - MIPI DSIM 0,
- 2 - MIPI CSIS 1,
- 3 - MIPI DSIM 1.
-"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
-supports additional fifth PHY:
- 4 - MIPI CSIS 2.
-
-Samsung Exynos SoC series Display Port PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the following supported values:
- - "samsung,exynos5250-dp-video-phy"
- - "samsung,exynos5420-dp-video-phy"
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
- control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 0;
-
-Samsung S5P/Exynos SoC series USB PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
- - "samsung,exynos3250-usb2-phy"
- - "samsung,exynos4210-usb2-phy"
- - "samsung,exynos4x12-usb2-phy"
- - "samsung,exynos5250-usb2-phy"
- - "samsung,exynos5420-usb2-phy"
- - "samsung,s5pv210-usb2-phy"
-- reg : a list of registers used by phy driver
- - first and obligatory is the location of phy modules registers
-- samsung,sysreg-phandle - handle to syscon used to control the system registers
-- samsung,pmureg-phandle - handle to syscon used to control PMU registers
-- #phy-cells : from the generic phy bindings, must be 1;
-- clocks and clock-names:
- - the "phy" clock is required by the phy module, used as a gate
- - the "ref" clock is used to get the rate of the clock provided to the
- PHY module
-
-Optional properties:
-- vbus-supply: power-supply phandle for vbus power source
-
-The first phandle argument in the PHY specifier identifies the PHY, its
-meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
-and Exynos 4212) it is as follows:
- 0 - USB device ("device"),
- 1 - USB host ("host"),
- 2 - HSIC0 ("hsic0"),
- 3 - HSIC1 ("hsic1"),
-Exynos3250 has only USB device phy available as phy 0.
-
-Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
-register is supplied.
-
-Example:
-
-For Exynos 4412 (compatible with Exynos 4212):
-
-usbphy: phy@125b0000 {
- compatible = "samsung,exynos4x12-usb2-phy";
- reg = <0x125b0000 0x100>;
- clocks = <&clock 305>, <&clock 2>;
- clock-names = "phy", "ref";
- #phy-cells = <1>;
- samsung,sysreg-phandle = <&sys_reg>;
- samsung,pmureg-phandle = <&pmu_reg>;
-};
-
-Then the PHY can be used in other nodes such as:
-
-phy-consumer@12340000 {
- phys = <&usbphy 2>;
- phy-names = "phy";
-};
-
-Refer to DT bindings documentation of particular PHY consumer devices for more
-information about required PHYs and the way of specification.
-
-Samsung SATA PHY Controller
----------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
-- reg : offset and length of the SATA PHY register set;
-- #phy-cells : must be zero
-- clocks : must be exactly one entry
-- clock-names : must be "sata_phyctrl"
-- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
-- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
-
-Example:
- sata_phy: sata-phy@12170000 {
- compatible = "samsung,exynos5250-sata-phy";
- reg = <0x12170000 0x1ff>;
- clocks = <&clock 287>;
- clock-names = "sata_phyctrl";
- #phy-cells = <0>;
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- samsung,syscon-phandle = <&pmu_syscon>;
- };
-
-Device-Tree bindings for sataphy i2c client driver
---------------------------------------------------
-
-Required properties:
-compatible: Should be "samsung,exynos-sataphy-i2c"
-- reg: I2C address of the sataphy i2c device.
-
-Example:
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
-
-Samsung Exynos5 SoC series USB DRD PHY controller
---------------------------------------------------
-
-Required properties:
-- compatible : Should be set to one of the following supported values:
- - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
- - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
- - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
- - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
-- reg : Register offset and length of USB DRD PHY register set;
-- clocks: Clock IDs array as required by the controller
-- clock-names: names of clocks correseponding to IDs in the clock property;
- Required clocks:
- - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
- used for register access.
- - ref: PHY's reference clock (usually crystal clock), used for
- PHY operations, associated by phy name. It is used to
- determine bit values for clock settings register.
- For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
- - optional clocks: Exynos5433 & Exynos7 SoC has now following additional
- gate clocks available:
- - phy_pipe: for PIPE3 phy
- - phy_utmi: for UTMI+ phy
- - itp: for ITP generation
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
- control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 1;
-
-For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
-compatible PHYs, the second cell in the PHY specifier identifies the
-PHY id, which is interpreted as follows:
- 0 - UTMI+ type phy,
- 1 - PIPE3 type phy,
-
-Example:
- usbdrd_phy: usbphy@12100000 {
- compatible = "samsung,exynos5250-usbdrd-phy";
- reg = <0x12100000 0x100>;
- clocks = <&clock 286>, <&clock 1>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
-- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
- 'usbdrd_phy' nodes should have numbered alias in the aliases node,
- in the form of usbdrdphyN, N = 0, 1... (depending on number of
- controllers).
-Example:
- aliases {
- usbdrdphy0 = &usb3_phy0;
- usbdrdphy1 = &usb3_phy1;
- };
-
-Samsung Exynos SoC series PCIe PHY controller
---------------------------------------------------
-Required properties:
-- compatible : Should be set to "samsung,exynos5440-pcie-phy"
-- #phy-cells : Must be zero
-- reg : a register used by phy driver.
- - First is for phy register, second is for block register.
-- reg-names : Must be set to "phy" and "block".
-
-Example:
- pcie_phy0: pcie-phy@270000 {
- #phy-cells = <0>;
- compatible = "samsung,exynos5440-pcie-phy";
- reg = <0x270000 0x1000>, <0x271000 0x40>;
- reg-names = "phy", "block";
- };