diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/wm8903.txt')
-rw-r--r-- | Documentation/devicetree/bindings/sound/wm8903.txt | 82 |
1 files changed, 0 insertions, 82 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt deleted file mode 100644 index 6371c2434afe..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8903.txt +++ /dev/null @@ -1,82 +0,0 @@ -WM8903 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8903" - - - reg : the I2C address of the device. - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - -Optional properties: - - - interrupts : The interrupt line the codec is connected to. - - - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the - default is 0. - - - micdet-delay : The debounce delay for microphone detection in mS. If - absent, the default is 100. - - - gpio-cfg : A list of GPIO configuration register values. The list must - be 5 entries long. If absent, no configuration of these registers is - performed. If any entry has the value 0xffffffff, that GPIO's - configuration will not be modified. - - - AVDD-supply : Analog power supply regulator on the AVDD pin. - - - CPVDD-supply : Charge pump supply regulator on the CPVDD pin. - - - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin. - - - DCVDD-supply : Digital core supply regulator for the DCVDD pin. - -Pins on the device (for linking into audio routes): - - * IN1L - * IN1R - * IN2L - * IN2R - * IN3L - * IN3R - * DMICDAT - * HPOUTL - * HPOUTR - * LINEOUTL - * LINEOUTR - * LOP - * LON - * ROP - * RON - * MICBIAS - -Example: - -wm8903: codec@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupts = < 347 >; - - AVDD-supply = <&fooreg_a>; - CPVDD-supply = <&fooreg_b>; - DBVDD-supply = <&fooreg_c>; - DCVDC-supply = <&fooreg_d>; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = < - 0x0600 /* DMIC_LR, output */ - 0x0680 /* DMIC_DAT, input */ - 0x0000 /* GPIO, output, low */ - 0x0200 /* Interrupt, output */ - 0x01a0 /* BCLK, input, active high */ - >; -}; |