summaryrefslogtreecommitdiff
path: root/Documentation/networking/sk98lin.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/sk98lin.txt')
-rw-r--r--Documentation/networking/sk98lin.txt8
1 files changed, 4 insertions, 4 deletions
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index b8bc7dd3d282..817fc113d93b 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -180,7 +180,7 @@ To set the driver parameters in this file, proceed as follows:
1. Insert a line of the form :
options sk98lin ...
For "...", the same syntax is required as described for the command
- line paramaters of modprobe below.
+ line parameters of modprobe below.
2. To activate the new parameters, either reboot your computer
or
unload and reload the driver.
@@ -364,9 +364,9 @@ Parameter: IntsPerSec
Values: 30...40000 (interrupts per second)
Default: 2000
-This parameter is only used, if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this paramter if no moderation is
-applied, will lead to no action performed.
+This parameter is only used if either static or dynamic interrupt moderation
+is used on a network adapter card. Using this parameter if no moderation is
+applied will lead to no action performed.
This parameter determines the length of any interrupt moderation interval.
Assuming that static interrupt moderation is to be used, an 'IntsPerSec'