diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-ipq8064.dtsi')
-rw-r--r-- | arch/arm/boot/dts/qcom-ipq8064.dtsi | 198 |
1 files changed, 172 insertions, 26 deletions
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 808ea1862283..c8337c870bdb 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -292,8 +292,11 @@ }; smem: smem@41000000 { + compatible = "qcom,smem"; reg = <0x41000000 0x200000>; no-map; + + hwlocks = <&sfpb_mutex 3>; }; }; @@ -382,6 +385,13 @@ }; }; + i2c4_pins: i2c4-default { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; @@ -424,6 +434,8 @@ pullups { pins = "gpio39"; + function = "nand"; + drive-strength = <10>; bias-pull-up; }; @@ -431,9 +443,32 @@ pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; bias-bus-hold; }; }; + + mdio0_pins: mdio0-pins { + mux { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2-pins { + mux { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; }; intc: interrupt-controller@2000000 { @@ -507,6 +542,44 @@ regulator; }; + gsbi1: gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + gsbi1_i2c: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; @@ -530,7 +603,7 @@ status = "disabled"; }; - i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; @@ -631,6 +704,49 @@ }; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16500000 0x100>; + cell-index = <6>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + gsbi6_spi: spi@16580000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -652,6 +768,20 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; }; rng@1a500000 { @@ -723,10 +853,13 @@ }; qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; tsens_calib: calib@400 { reg = <0x400 0xb>; }; @@ -773,6 +906,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; }; }; @@ -784,7 +919,7 @@ l2cc: clock-controller@2011000 { compatible = "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; clock-output-names = "acpu_l2_aux"; }; @@ -810,7 +945,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; @@ -861,7 +996,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -912,7 +1047,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -967,7 +1102,7 @@ gmac0: ethernet@37000000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37000000 0x200000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -991,7 +1126,7 @@ gmac1: ethernet@37200000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37200000 0x200000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1015,7 +1150,7 @@ gmac2: ethernet@37400000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37400000 0x200000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1039,7 +1174,7 @@ gmac3: ethernet@37600000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37600000 0x200000>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1113,6 +1248,8 @@ clocks = <&gcc USB30_1_UTMI_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; ss_phy_1: phy@110f8830 { @@ -1121,6 +1258,8 @@ clocks = <&gcc USB30_1_MASTER_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; usb3_1: usb3@110f8800 { @@ -1184,16 +1323,16 @@ ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -1204,18 +1343,18 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; sd-uhs-sdr104; sd-uhs-ddr50; vqmmc-supply = <&vsdcc_fixed>; @@ -1223,5 +1362,12 @@ dma-names = "tx", "rx"; }; }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; }; }; |