summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/board-eco920.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-eco920.c')
-rw-r--r--arch/arm/mach-at91/board-eco920.c160
1 files changed, 0 insertions, 160 deletions
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644
index 4e75321a8f2a..000000000000
--- a/arch/arm/mach-at91/board-eco920.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eco920_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
- .vbus_pin = AT91_PIN_PB12,
- .pullup_pin = AT91_PIN_PB13,
-};
-
-static struct mci_platform_data __initdata eco920_mci0_data = {
- .slot[0] = {
- .bus_width = 1,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct physmap_flash_data eco920_flash_data = {
- .width = 2,
-};
-
-static struct resource eco920_flash_resource = {
- .start = 0x11000000,
- .end = 0x11ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &eco920_flash_data,
- },
- .resource = &eco920_flash_resource,
- .num_resources = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
- { /* CAN controller */
- .modalias = "tlv5638",
- .chip_select = 3,
- .max_speed_hz = 20 * 1000 * 1000,
- .mode = SPI_CPHA,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led eco920_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init eco920_board_init(void)
-{
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- at91_add_device_eth(&eco920_eth_data);
- at91_add_device_usbh(&eco920_usbh_data);
- at91_add_device_udc(&eco920_udc_data);
-
- at91_add_device_mci(0, &eco920_mci0_data);
- platform_device_register(&eco920_flash);
-
- at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
- | AT91_SMC_RWSETUP_(1)
- | AT91_SMC_DBW_8
- | AT91_SMC_WSEN
- | AT91_SMC_NWS_(15));
-
- at91_set_A_periph(AT91_PIN_PC6, 1);
-
- at91_set_gpio_input(AT91_PIN_PA23, 0);
- at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
- at91_ramc_write(0, AT91_SMC_CSR(3),
- AT91_SMC_DBW_16 | /* 16 bit */
- AT91_SMC_WSEN |
- AT91_SMC_NWS_(5) | /* wait states */
- AT91_SMC_TDF_(1) /* float time */
- );
-
- at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
- /* LEDs */
- at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
-}
-
-MACHINE_START(ECO920, "eco920")
- /* Maintainer: Sascha Hauer */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = eco920_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = eco920_board_init,
-MACHINE_END