diff options
Diffstat (limited to 'arch/arm/mach-clps711x')
| -rw-r--r-- | arch/arm/mach-clps711x/Kconfig | 53 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/Makefile | 14 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/Makefile.boot | 5 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/board-dt.c | 82 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/common.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/clps711x.h | 204 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/hardware.h | 53 | ||||
| -rw-r--r-- | arch/arm/mach-clps711x/include/mach/uncompress.h | 55 |
8 files changed, 100 insertions, 370 deletions
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index f711498c180c..3b56197ccfd0 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -1,38 +1,15 @@ -if ARCH_CLPS711X - -menu "CLPS711X/EP721X/EP731X Implementations" - -config ARCH_AUTCPU12 - bool "AUTCPU12" - help - Say Y if you intend to run the kernel on the autronix autcpu12 - board. This board is based on a Cirrus Logic CS89712. - -config ARCH_CDB89712 - bool "CDB89712" - help - This is an evaluation board from Cirrus for the CS89712 processor. - The board includes 2 serial ports, Ethernet, IRDA, and expansion - headers. It comes with 16 MB SDRAM and 8 MB flash ROM. - -config ARCH_CLEP7312 - bool "CLEP7312" - help - Boards based on the Cirrus Logic 7212/7312 chips. - -config ARCH_EDB7211 - bool "EDB7211" - select ARCH_HAS_HOLES_MEMORYMODEL - help - Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 - evaluation board. - -config ARCH_P720T - bool "P720T" - help - Say Y here if you intend to run this kernel on the ARM Prospector - 720T. - -endmenu - -endif +menuconfig ARCH_CLPS711X + bool "Cirrus Logic EP721x/EP731x-based" + depends on ARCH_MULTI_V4T + select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR + select CLKSRC_MMIO + select CLKSRC_OF + select COMMON_CLK + select CPU_ARM720T + select GENERIC_CLOCKEVENTS + select MFD_SYSCON + select OF_IRQ + select USE_OF + help + Select this if you use ARMv4T Cirrus Logic chips. diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index f04151efd96a..bd0b7b5d6e9d 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -1,13 +1 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := common.o devices.o - -obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o -obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o -obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o -obj-$(CONFIG_ARCH_P720T) += board-p720t.o +obj-y += board-dt.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index eba77d35a615..e69de29bb2d1 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +0,0 @@ -# The standard locations for stuff on CLPS711x type processors -params_phys-y := 0xc0000100 -# Should probably have some agreement on these... -initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 -initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000 diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c new file mode 100644 index 000000000000..ee1f83b1a332 --- /dev/null +++ b/arch/arm/mach-clps711x/board-dt.c @@ -0,0 +1,82 @@ +/* + * Author: Alexander Shiyan <shc_work@mail.ru>, 2016 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/io.h> +#include <linux/of_fdt.h> +#include <linux/platform_device.h> +#include <linux/random.h> +#include <linux/sizes.h> + +#include <linux/mfd/syscon/clps711x.h> + +#include <asm/system_info.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#define CLPS711X_VIRT_BASE IOMEM(0xfeff4000) +#define CLPS711X_PHYS_BASE (0x80000000) +# define SYSFLG1 (0x0140) +# define HALT (0x0800) +# define UNIQID (0x2440) +# define RANDID0 (0x2700) +# define RANDID1 (0x2704) +# define RANDID2 (0x2708) +# define RANDID3 (0x270c) + +static struct map_desc clps711x_io_desc __initdata = { + .virtual = (unsigned long)CLPS711X_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), + .length = 48 * SZ_1K, + .type = MT_DEVICE, +}; + +static void __init clps711x_map_io(void) +{ + iotable_init(&clps711x_io_desc, 1); +} + +static const struct resource clps711x_cpuidle_res = + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128); + +static void __init clps711x_init(void) +{ + u32 id[5]; + + id[0] = readl(CLPS711X_VIRT_BASE + UNIQID); + id[1] = readl(CLPS711X_VIRT_BASE + RANDID0); + id[2] = readl(CLPS711X_VIRT_BASE + RANDID1); + id[3] = readl(CLPS711X_VIRT_BASE + RANDID2); + id[4] = readl(CLPS711X_VIRT_BASE + RANDID3); + system_rev = SYSFLG1_VERID(readl(CLPS711X_VIRT_BASE + SYSFLG1)); + + add_device_randomness(id, sizeof(id)); + + system_serial_low = id[0]; + + platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE, + &clps711x_cpuidle_res, 1); +} + +static void clps711x_restart(enum reboot_mode mode, const char *cmd) +{ + soft_restart(0); +} + +static const char *clps711x_compat[] __initconst = { + "cirrus,ep7209", + NULL +}; + +DT_MACHINE_START(CLPS711X_DT, "Cirrus Logic CLPS711X (Device Tree Support)") + .dt_compat = clps711x_compat, + .map_io = clps711x_map_io, + .init_late = clps711x_init, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 671acc5a3282..6466da8f3c11 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -37,8 +37,8 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_64K, - .type = MT_DEVICE + .length = 48 * SZ_1K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h deleted file mode 100644 index eb052a11aa9d..000000000000 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * This file contains the hardware definitions of the Cirrus Logic - * ARM7 CLPS711X internal registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __MACH_CLPS711X_H -#define __MACH_CLPS711X_H - -#include <linux/mfd/syscon/clps711x.h> - -#define CLPS711X_PHYS_BASE (0x80000000) - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PCDR (0x0002) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PCDDR (0x0042) -#define PDDDR (0x0043) -#define PEDR (0x0083) -#define PEDDR (0x00c3) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SS2POP (0x16c0) - -#define DAIR (0x2000) -#define DAIDR0 (0x2040) -#define DAIDR1 (0x2080) -#define DAIDR2 (0x20c0) -#define DAISR (0x2100) -#define SYSCON3 (0x2200) -#define LEDFLSH (0x22c0) -#define SDCONF (0x2300) -#define SDRFPR (0x2340) -#define UNIQID (0x2440) -#define DAI64FS (0x2600) -#define PLLW (0x2610) -#define PLLR (0xa5a8) -#define RANDID0 (0x2700) -#define RANDID1 (0x2704) -#define RANDID2 (0x2708) -#define RANDID3 (0x270c) - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#define DAIR_RESERVED (0x0404) -#define DAIR_DAIEN (1 << 16) -#define DAIR_ECS (1 << 17) -#define DAIR_LCTM (1 << 19) -#define DAIR_LCRM (1 << 20) -#define DAIR_RCTM (1 << 21) -#define DAIR_RCRM (1 << 22) -#define DAIR_LBM (1 << 23) - -#define DAIDR2_FIFOEN (1 << 15) -#define DAIDR2_FIFOLEFT (0x0d << 16) -#define DAIDR2_FIFORIGHT (0x11 << 16) - -#define DAISR_RCTS (1 << 0) -#define DAISR_RCRS (1 << 1) -#define DAISR_LCTS (1 << 2) -#define DAISR_LCRS (1 << 3) -#define DAISR_RCTU (1 << 4) -#define DAISR_RCRO (1 << 5) -#define DAISR_LCTU (1 << 6) -#define DAISR_LCRO (1 << 7) -#define DAISR_RCNF (1 << 8) -#define DAISR_RCNE (1 << 9) -#define DAISR_LCNF (1 << 10) -#define DAISR_LCNE (1 << 11) -#define DAISR_FIFO (1 << 12) - -#define DAI64FS_I2SF64 (1 << 0) -#define DAI64FS_AUDIOCLKEN (1 << 1) -#define DAI64FS_AUDIOCLKSRC (1 << 2) -#define DAI64FS_MCLK256EN (1 << 3) -#define DAI64FS_LOOPBACK (1 << 5) - -#define SDCONF_ACTIVE (1 << 10) -#define SDCONF_CLKCTL (1 << 9) -#define SDCONF_WIDTH_4 (0 << 7) -#define SDCONF_WIDTH_8 (1 << 7) -#define SDCONF_WIDTH_16 (2 << 7) -#define SDCONF_WIDTH_32 (3 << 7) -#define SDCONF_SIZE_16 (0 << 5) -#define SDCONF_SIZE_64 (1 << 5) -#define SDCONF_SIZE_128 (2 << 5) -#define SDCONF_SIZE_256 (3 << 5) -#define SDCONF_CASLAT_2 (2) -#define SDCONF_CASLAT_3 (3) - -#define MEMCFG_BUS_WIDTH_32 (1) -#define MEMCFG_BUS_WIDTH_16 (0) -#define MEMCFG_BUS_WIDTH_8 (3) - -#define MEMCFG_SQAEN (1 << 6) -#define MEMCFG_CLKENB (1 << 7) - -#define MEMCFG_WAITSTATE_8_3 (0 << 2) -#define MEMCFG_WAITSTATE_7_3 (1 << 2) -#define MEMCFG_WAITSTATE_6_3 (2 << 2) -#define MEMCFG_WAITSTATE_5_3 (3 << 2) -#define MEMCFG_WAITSTATE_4_2 (4 << 2) -#define MEMCFG_WAITSTATE_3_2 (5 << 2) -#define MEMCFG_WAITSTATE_2_2 (6 << 2) -#define MEMCFG_WAITSTATE_1_2 (7 << 2) -#define MEMCFG_WAITSTATE_8_1 (8 << 2) -#define MEMCFG_WAITSTATE_7_1 (9 << 2) -#define MEMCFG_WAITSTATE_6_1 (10 << 2) -#define MEMCFG_WAITSTATE_5_1 (11 << 2) -#define MEMCFG_WAITSTATE_4_0 (12 << 2) -#define MEMCFG_WAITSTATE_3_0 (13 << 2) -#define MEMCFG_WAITSTATE_2_0 (14 << 2) -#define MEMCFG_WAITSTATE_1_0 (15 << 2) - -/* INTSR1 Interrupts */ -#define IRQ_CSINT (4) -#define IRQ_EINT1 (5) -#define IRQ_EINT2 (6) -#define IRQ_EINT3 (7) -#define IRQ_TC1OI (8) -#define IRQ_TC2OI (9) -#define IRQ_RTCMI (10) -#define IRQ_TINT (11) -#define IRQ_UTXINT1 (12) -#define IRQ_URXINT1 (13) -#define IRQ_UMSINT (14) -#define IRQ_SSEOTI (15) - -/* INTSR2 Interrupts */ -#define IRQ_KBDINT (16 + 0) -#define IRQ_SS2RX (16 + 1) -#define IRQ_SS2TX (16 + 2) -#define IRQ_UTXINT2 (16 + 12) -#define IRQ_URXINT2 (16 + 13) - -/* INTSR3 Interrupts */ -#define IRQ_DAIINT (32 + 0) - -#endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h deleted file mode 100644 index 833129c9f798..000000000000 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/hardware.h - * - * This file contains the hardware definitions of the Prospector P720T. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <mach/clps711x.h> - -#define CLPS711X_VIRT_BASE IOMEM(0xfeff0000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) -#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off)) -#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off)) -#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off)) -#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off)) -#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) -#endif - -#define CS0_PHYS_BASE (0x00000000) -#define CS1_PHYS_BASE (0x10000000) -#define CS2_PHYS_BASE (0x20000000) -#define CS3_PHYS_BASE (0x30000000) -#define CS4_PHYS_BASE (0x40000000) -#define CS5_PHYS_BASE (0x50000000) -#define CS6_PHYS_BASE (0x60000000) -#define CS7_PHYS_BASE (0x70000000) - -#define CLPS711X_SRAM_BASE CS6_PHYS_BASE -#define CLPS711X_SRAM_SIZE (48 * 1024) - -#define CLPS711X_SDRAM0_BASE (0xc0000000) -#define CLPS711X_SDRAM1_BASE (0xd0000000) - -#endif diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h deleted file mode 100644 index 5f02d06dc655..000000000000 --- a/arch/arm/mach-clps711x/include/mach/uncompress.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/uncompress.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <mach/clps711x.h> - -#ifdef CONFIG_DEBUG_CLPS711X_UART2 -#define SYSFLGx SYSFLG2 -#define UARTDRx UARTDR2 -#else -#define SYSFLGx SYSFLG1 -#define UARTDRx UARTDR1 -#endif - -#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x))) - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static inline void putc(int c) -{ - while (phys_reg(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - phys_reg(UARTDRx) = c; -} - -static inline void flush(void) -{ - while (phys_reg(SYSFLGx) & SYSFLG_UBUSY) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() |