summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x')
-rw-r--r--arch/arm/mach-orion5x/addr-map.c2
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c4
-rw-r--r--arch/arm/mach-orion5x/irq.c8
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c2
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c4
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c6
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c18
9 files changed, 24 insertions, 24 deletions
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 1a5d6a0e2602..5ceafdccc456 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,7 +19,7 @@
#include "common.h"
/*
- * The Orion has fully programable address map. There's a separate address
+ * The Orion has fully programmable address map. There's a separate address
* map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
* Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
* address decode windows that allow it to access any of the Orion resources.
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index c10a11715376..b7d4591214e0 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
if (gpio_request(pin, "PCI Int1") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "db88f5281_pci_preinit faield to "
"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
if (gpio_request(pin, "PCI Int2") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "db88f5281_pci_preinit faield "
"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ed85891f8699..43cf8bc9767b 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -34,8 +34,8 @@ void __init orion5x_init_irq(void)
* Initialize gpiolib for GPIOs 0-31.
*/
orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
- set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
- set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
- set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
- set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
+ irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
+ irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
+ irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
+ irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
}
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fdd..a5930f83958b 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
* The power front LEDs (blue and red) and SATA red LEDs are controlled via a
* single GPIO line and are compatible with the leds-gpio driver.
*
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
* in the following array:
*
* SATAx blue LED | SATAx activity | LED state
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 67ec6959b267..4fc46772a087 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
if (gpio_request(pin, "PCI IntA") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "rd88f5182_pci_preinit faield to "
"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
if (gpio_request(pin, "PCI IntB") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "rd88f5182_pci_preinit faield to "
"set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 5653ee6c71d8..616004143912 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -88,7 +88,7 @@ void __init tsp2_pci_preinit(void)
pin = TSP2_PCI_SLOT0_IRQ_PIN;
if (gpio_request(pin, "PCI Int1") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "tsp2_pci_preinit failed "
"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 8bbd27ea6735..e6d64494d3de 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -36,7 +36,7 @@
/****************************************************************************
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
+ * partitions on the device because we want to keep compatibility with
* existing QNAP firmware.
*
* Layout as used by QNAP:
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
if (gpio_request(pin, "PCI Int1") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
if (gpio_request(pin, "PCI Int2") == 0) {
if (gpio_direction_input(pin) == 0) {
- set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "qnap_ts209_pci_preinit failed "
"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92f393f08fa4..9eac8192d923 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -56,7 +56,7 @@
/****************************************************************************
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
+ * partitions on the device because we want to keep compatibility with
* existing QNAP firmware.
*
* Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707d20a9..edb1dd2d1611 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
- printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+ pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RTC not registered\n");
+ pr_info("TS-78xx: RTC not registered\n");
ts78xx_fpga.supports.ts_rtc.present = 0;
}
ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: NAND not registered\n");
+ pr_info("TS-78xx: NAND not registered\n");
ts78xx_fpga.supports.ts_nand.present = 0;
}
ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
- printk(KERN_INFO "TS-78xx: RNG not registered\n");
+ pr_info("TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
- printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
- printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
+ pr_err("TS-78xx FPGA: magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
int value, ret;
if (ts78xx_fpga.state < 0) {
- printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+ pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
return -EBUSY;
}
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
else {
- printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+ pr_err("ts78xx_fpga_store: Invalid value\n");
return -EINVAL;
}
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
ret = ts78xx_fpga_load();
ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
if (ret)
- printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+ pr_err("sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 13:28:13 +0300