diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 151 |
1 files changed, 134 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 99c6d6574559..bdcba719fc38 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -24,6 +24,7 @@ aliases { i2c4 = &i2c4; i2c21 = &i2c21; + serial1 = &uart2; }; wcd938x: audio-codec { @@ -363,7 +364,11 @@ compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_s10b: smps10 { regulator-name = "vreg_s10b"; @@ -416,7 +421,21 @@ regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -453,6 +472,10 @@ qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; @@ -531,11 +554,9 @@ backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -574,6 +595,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; @@ -584,7 +606,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&i2c21_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -595,13 +617,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -611,9 +629,7 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; }; @@ -625,6 +641,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; @@ -681,6 +698,23 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; }; &pcie4_phy { @@ -770,6 +804,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &pmk8280_vadc { status = "okay"; @@ -1019,6 +1068,32 @@ status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &usb_0 { status = "okay"; }; @@ -1139,6 +1214,21 @@ &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1149,7 +1239,6 @@ hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; - input-enable; bias-disable; }; @@ -1306,12 +1395,40 @@ }; }; + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + usb0_sbu_default: usb0-sbu-state { oe-n-pins { pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -1328,7 +1445,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; |