diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8450-hdk.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 189 |
1 files changed, 158 insertions, 31 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 4de3e1f1c39c..feef3837e4cd 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -8,6 +8,13 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 HDK"; @@ -17,10 +24,69 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b_1p8>; + vdd-rxtx-supply = <&vreg_s10b_1p8>; + vdd-io-supply = <&vreg_s10b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vph_pwr>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vreg_bob>; + gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -33,7 +99,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -124,7 +190,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -237,7 +303,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -280,7 +346,7 @@ }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -350,6 +416,74 @@ }; }; +&dispcc { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &pcie0 { status = "okay"; max-link-speed = <2>; @@ -395,6 +529,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &sdhc_2 { cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; @@ -407,33 +545,6 @@ status = "okay"; }; -&soc { - wcd938x: codec { - compatible = "qcom,wcd9380-codec"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcd_default>; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - - reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <1>; - - vdd-buck-supply = <&vreg_s10b_1p8>; - vdd-rxtx-supply = <&vreg_s10b_1p8>; - vdd-io-supply = <&vreg_s10b_1p8>; - vdd-mic-bias-supply = <&vreg_bob>; - }; -}; - &sound { compatible = "qcom,sm8450-sndcard"; model = "SM8450-HDK"; @@ -516,6 +627,8 @@ }; &swr0 { + status = "okay"; + left_spkr: speaker@0,1 { compatible = "sdw10217020200"; reg = <0 1>; @@ -564,6 +677,18 @@ &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio44"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio107"; + function = "gpio"; + output-high; + }; + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio92"; function = "gpio"; @@ -622,6 +747,8 @@ pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b_1p8>; qcom,dmic-sample-rate = <600000>; + + status = "okay"; }; &tlmm { |