summaryrefslogtreecommitdiff
path: root/arch/powerpc/kvm/book3s_hv_rmhandlers.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kvm/book3s_hv_rmhandlers.S')
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S527
1 files changed, 314 insertions, 213 deletions
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 86f0cae37a85..975655573844 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -29,6 +29,7 @@
#include <asm/kvm_book3s_asm.h>
#include <asm/book3s/64/mmu-hash.h>
#include <asm/tm.h>
+#include <asm/opal.h>
#define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM)
@@ -373,6 +374,18 @@ kvm_secondary_got_guest:
lwsync
std r0, HSTATE_KVM_VCORE(r13)
+ /*
+ * All secondaries exiting guest will fall through this path.
+ * Before proceeding, just check for HMI interrupt and
+ * invoke opal hmi handler. By now we are sure that the
+ * primary thread on this core/subcore has already made partition
+ * switch/TB resync and we are good to call opal hmi handler.
+ */
+ cmpwi r12, BOOK3S_INTERRUPT_HMI
+ bne kvm_no_guest
+
+ li r3,0 /* NULL argument */
+ bl hmi_exception_realmode
/*
* At this point we have finished executing in the guest.
* We need to wait for hwthread_req to become zero, since
@@ -428,6 +441,22 @@ kvm_no_guest:
*/
kvm_unsplit_nap:
/*
+ * When secondaries are napping in kvm_unsplit_nap() with
+ * hwthread_req = 1, HMI goes ignored even though subcores are
+ * already exited the guest. Hence HMI keeps waking up secondaries
+ * from nap in a loop and secondaries always go back to nap since
+ * no vcore is assigned to them. This makes impossible for primary
+ * thread to get hold of secondary threads resulting into a soft
+ * lockup in KVM path.
+ *
+ * Let us check if HMI is pending and handle it before we go to nap.
+ */
+ cmpwi r12, BOOK3S_INTERRUPT_HMI
+ bne 55f
+ li r3, 0 /* NULL argument */
+ bl hmi_exception_realmode
+55:
+ /*
* Ensure that secondary doesn't nap when it has
* its vcore pointer set.
*/
@@ -601,6 +630,11 @@ BEGIN_FTR_SECTION
mtspr SPRN_DPDES, r8
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ /* Mark the subcore state as inside guest */
+ bl kvmppc_subcore_enter_guest
+ nop
+ ld r5, HSTATE_KVM_VCORE(r13)
+ ld r4, HSTATE_KVM_VCPU(r13)
li r0,1
stb r0,VCORE_IN_GUEST(r5) /* signal secondaries to continue */
@@ -655,112 +689,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
- b skip_tm
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
-
- /* Turn on TM/FP/VSX/VMX so we can restore them. */
- mfmsr r5
- li r6, MSR_TM >> 32
- sldi r6, r6, 32
- or r5, r5, r6
- ori r5, r5, MSR_FP
- oris r5, r5, (MSR_VEC | MSR_VSX)@h
- mtmsrd r5
-
- /*
- * The user may change these outside of a transaction, so they must
- * always be context switched.
- */
- ld r5, VCPU_TFHAR(r4)
- ld r6, VCPU_TFIAR(r4)
- ld r7, VCPU_TEXASR(r4)
- mtspr SPRN_TFHAR, r5
- mtspr SPRN_TFIAR, r6
- mtspr SPRN_TEXASR, r7
-
- ld r5, VCPU_MSR(r4)
- rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
- beq skip_tm /* TM not active in guest */
-
- /* Make sure the failure summary is set, otherwise we'll program check
- * when we trechkpt. It's possible that this might have been not set
- * on a kvmppc_set_one_reg() call but we shouldn't let this crash the
- * host.
- */
- oris r7, r7, (TEXASR_FS)@h
- mtspr SPRN_TEXASR, r7
-
- /*
- * We need to load up the checkpointed state for the guest.
- * We need to do this early as it will blow away any GPRs, VSRs and
- * some SPRs.
- */
-
- mr r31, r4
- addi r3, r31, VCPU_FPRS_TM
- bl load_fp_state
- addi r3, r31, VCPU_VRS_TM
- bl load_vr_state
- mr r4, r31
- lwz r7, VCPU_VRSAVE_TM(r4)
- mtspr SPRN_VRSAVE, r7
-
- ld r5, VCPU_LR_TM(r4)
- lwz r6, VCPU_CR_TM(r4)
- ld r7, VCPU_CTR_TM(r4)
- ld r8, VCPU_AMR_TM(r4)
- ld r9, VCPU_TAR_TM(r4)
- mtlr r5
- mtcr r6
- mtctr r7
- mtspr SPRN_AMR, r8
- mtspr SPRN_TAR, r9
-
- /*
- * Load up PPR and DSCR values but don't put them in the actual SPRs
- * till the last moment to avoid running with userspace PPR and DSCR for
- * too long.
- */
- ld r29, VCPU_DSCR_TM(r4)
- ld r30, VCPU_PPR_TM(r4)
-
- std r2, PACATMSCRATCH(r13) /* Save TOC */
-
- /* Clear the MSR RI since r1, r13 are all going to be foobar. */
- li r5, 0
- mtmsrd r5, 1
-
- /* Load GPRs r0-r28 */
- reg = 0
- .rept 29
- ld reg, VCPU_GPRS_TM(reg)(r31)
- reg = reg + 1
- .endr
-
- mtspr SPRN_DSCR, r29
- mtspr SPRN_PPR, r30
-
- /* Load final GPRs */
- ld 29, VCPU_GPRS_TM(29)(r31)
- ld 30, VCPU_GPRS_TM(30)(r31)
- ld 31, VCPU_GPRS_TM(31)(r31)
-
- /* TM checkpointed state is now setup. All GPRs are now volatile. */
- TRECHKPT
-
- /* Now let's get back the state we need. */
- HMT_MEDIUM
- GET_PACA(r13)
- ld r29, HSTATE_DSCR(r13)
- mtspr SPRN_DSCR, r29
- ld r4, HSTATE_KVM_VCPU(r13)
- ld r1, HSTATE_HOST_R1(r13)
- ld r2, PACATMSCRATCH(r13)
-
- /* Set the MSR RI since we have our registers back. */
- li r5, MSR_RI
- mtmsrd r5, 1
-skip_tm:
+ bl kvmppc_restore_tm
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/* Load guest PMU registers */
@@ -841,12 +771,6 @@ BEGIN_FTR_SECTION
/* Skip next section on POWER7 */
b 8f
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
- /* Turn on TM so we can access TFHAR/TFIAR/TEXASR */
- mfmsr r8
- li r0, 1
- rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG
- mtmsrd r8
-
/* Load up POWER8-specific registers */
ld r5, VCPU_IAMR(r4)
lwz r6, VCPU_PSPB(r4)
@@ -1436,106 +1360,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
- b 2f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
- /* Turn on TM. */
- mfmsr r8
- li r0, 1
- rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG
- mtmsrd r8
-
- ld r5, VCPU_MSR(r9)
- rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
- beq 1f /* TM not active in guest. */
-
- li r3, TM_CAUSE_KVM_RESCHED
-
- /* Clear the MSR RI since r1, r13 are all going to be foobar. */
- li r5, 0
- mtmsrd r5, 1
-
- /* All GPRs are volatile at this point. */
- TRECLAIM(R3)
-
- /* Temporarily store r13 and r9 so we have some regs to play with */
- SET_SCRATCH0(r13)
- GET_PACA(r13)
- std r9, PACATMSCRATCH(r13)
- ld r9, HSTATE_KVM_VCPU(r13)
-
- /* Get a few more GPRs free. */
- std r29, VCPU_GPRS_TM(29)(r9)
- std r30, VCPU_GPRS_TM(30)(r9)
- std r31, VCPU_GPRS_TM(31)(r9)
-
- /* Save away PPR and DSCR soon so don't run with user values. */
- mfspr r31, SPRN_PPR
- HMT_MEDIUM
- mfspr r30, SPRN_DSCR
- ld r29, HSTATE_DSCR(r13)
- mtspr SPRN_DSCR, r29
-
- /* Save all but r9, r13 & r29-r31 */
- reg = 0
- .rept 29
- .if (reg != 9) && (reg != 13)
- std reg, VCPU_GPRS_TM(reg)(r9)
- .endif
- reg = reg + 1
- .endr
- /* ... now save r13 */
- GET_SCRATCH0(r4)
- std r4, VCPU_GPRS_TM(13)(r9)
- /* ... and save r9 */
- ld r4, PACATMSCRATCH(r13)
- std r4, VCPU_GPRS_TM(9)(r9)
-
- /* Reload stack pointer and TOC. */
- ld r1, HSTATE_HOST_R1(r13)
- ld r2, PACATOC(r13)
-
- /* Set MSR RI now we have r1 and r13 back. */
- li r5, MSR_RI
- mtmsrd r5, 1
-
- /* Save away checkpinted SPRs. */
- std r31, VCPU_PPR_TM(r9)
- std r30, VCPU_DSCR_TM(r9)
- mflr r5
- mfcr r6
- mfctr r7
- mfspr r8, SPRN_AMR
- mfspr r10, SPRN_TAR
- std r5, VCPU_LR_TM(r9)
- stw r6, VCPU_CR_TM(r9)
- std r7, VCPU_CTR_TM(r9)
- std r8, VCPU_AMR_TM(r9)
- std r10, VCPU_TAR_TM(r9)
-
- /* Restore r12 as trap number. */
- lwz r12, VCPU_TRAP(r9)
-
- /* Save FP/VSX. */
- addi r3, r9, VCPU_FPRS_TM
- bl store_fp_state
- addi r3, r9, VCPU_VRS_TM
- bl store_vr_state
- mfspr r6, SPRN_VRSAVE
- stw r6, VCPU_VRSAVE_TM(r9)
-1:
- /*
- * We need to save these SPRs after the treclaim so that the software
- * error code is recorded correctly in the TEXASR. Also the user may
- * change these outside of a transaction, so they must always be
- * context switched.
- */
- mfspr r5, SPRN_TFHAR
- mfspr r6, SPRN_TFIAR
- mfspr r7, SPRN_TEXASR
- std r5, VCPU_TFHAR(r9)
- std r6, VCPU_TFIAR(r9)
- std r7, VCPU_TEXASR(r9)
-2:
+ bl kvmppc_save_tm
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/* Increment yield count if they have a VPA */
@@ -1683,6 +1509,23 @@ BEGIN_FTR_SECTION
mtspr SPRN_DPDES, r8
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ /* If HMI, call kvmppc_realmode_hmi_handler() */
+ cmpwi r12, BOOK3S_INTERRUPT_HMI
+ bne 27f
+ bl kvmppc_realmode_hmi_handler
+ nop
+ li r12, BOOK3S_INTERRUPT_HMI
+ /*
+ * At this point kvmppc_realmode_hmi_handler would have resync-ed
+ * the TB. Hence it is not required to subtract guest timebase
+ * offset from timebase. So, skip it.
+ *
+ * Also, do not call kvmppc_subcore_exit_guest() because it has
+ * been invoked as part of kvmppc_realmode_hmi_handler().
+ */
+ b 30f
+
+27:
/* Subtract timebase offset from timebase */
ld r8,VCORE_TB_OFFSET(r5)
cmpdi r8,0
@@ -1698,8 +1541,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
addis r8,r8,0x100 /* if so, increment upper 40 bits */
mtspr SPRN_TBU40,r8
+17: bl kvmppc_subcore_exit_guest
+ nop
+30: ld r5,HSTATE_KVM_VCORE(r13)
+ ld r4,VCORE_KVM(r5) /* pointer to struct kvm */
+
/* Reset PCR */
-17: ld r0, VCORE_PCR(r5)
+ ld r0, VCORE_PCR(r5)
cmpdi r0, 0
beq 18f
li r0, 0
@@ -2245,6 +2093,13 @@ _GLOBAL(kvmppc_h_cede) /* r3 = vcpu pointer, r11 = msr, r13 = paca */
/* save FP state */
bl kvmppc_save_fp
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+BEGIN_FTR_SECTION
+ ld r9, HSTATE_KVM_VCPU(r13)
+ bl kvmppc_save_tm
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
+#endif
+
/*
* Set DEC to the smaller of DEC and HDEC, so that we wake
* no later than the end of our timeslice (HDEC interrupts
@@ -2321,6 +2176,12 @@ kvm_end_cede:
bl kvmhv_accumulate_time
#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+BEGIN_FTR_SECTION
+ bl kvmppc_restore_tm
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
+#endif
+
/* load up FP state */
bl kvmppc_load_fp
@@ -2461,6 +2322,8 @@ BEGIN_FTR_SECTION
cmpwi r6, 3 /* hypervisor doorbell? */
beq 3f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+ cmpwi r6, 0xa /* Hypervisor maintenance ? */
+ beq 4f
li r3, 1 /* anything else, return 1 */
0: blr
@@ -2482,6 +2345,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r3, -1
blr
+ /* Woken up due to Hypervisor maintenance interrupt */
+4: li r12, BOOK3S_INTERRUPT_HMI
+ li r3, 1
+ blr
+
/*
* Determine what sort of external interrupt is pending (if any).
* Returns:
@@ -2631,6 +2499,239 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mr r4,r31
blr
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+/*
+ * Save transactional state and TM-related registers.
+ * Called with r9 pointing to the vcpu struct.
+ * This can modify all checkpointed registers, but
+ * restores r1, r2 and r9 (vcpu pointer) before exit.
+ */
+kvmppc_save_tm:
+ mflr r0
+ std r0, PPC_LR_STKOFF(r1)
+
+ /* Turn on TM. */
+ mfmsr r8
+ li r0, 1
+ rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG
+ mtmsrd r8
+
+ ld r5, VCPU_MSR(r9)
+ rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
+ beq 1f /* TM not active in guest. */
+
+ std r1, HSTATE_HOST_R1(r13)
+ li r3, TM_CAUSE_KVM_RESCHED
+
+ /* Clear the MSR RI since r1, r13 are all going to be foobar. */
+ li r5, 0
+ mtmsrd r5, 1
+
+ /* All GPRs are volatile at this point. */
+ TRECLAIM(R3)
+
+ /* Temporarily store r13 and r9 so we have some regs to play with */
+ SET_SCRATCH0(r13)
+ GET_PACA(r13)
+ std r9, PACATMSCRATCH(r13)
+ ld r9, HSTATE_KVM_VCPU(r13)
+
+ /* Get a few more GPRs free. */
+ std r29, VCPU_GPRS_TM(29)(r9)
+ std r30, VCPU_GPRS_TM(30)(r9)
+ std r31, VCPU_GPRS_TM(31)(r9)
+
+ /* Save away PPR and DSCR soon so don't run with user values. */
+ mfspr r31, SPRN_PPR
+ HMT_MEDIUM
+ mfspr r30, SPRN_DSCR
+ ld r29, HSTATE_DSCR(r13)
+ mtspr SPRN_DSCR, r29
+
+ /* Save all but r9, r13 & r29-r31 */
+ reg = 0
+ .rept 29
+ .if (reg != 9) && (reg != 13)
+ std reg, VCPU_GPRS_TM(reg)(r9)
+ .endif
+ reg = reg + 1
+ .endr
+ /* ... now save r13 */
+ GET_SCRATCH0(r4)
+ std r4, VCPU_GPRS_TM(13)(r9)
+ /* ... and save r9 */
+ ld r4, PACATMSCRATCH(r13)
+ std r4, VCPU_GPRS_TM(9)(r9)
+
+ /* Reload stack pointer and TOC. */
+ ld r1, HSTATE_HOST_R1(r13)
+ ld r2, PACATOC(r13)
+
+ /* Set MSR RI now we have r1 and r13 back. */
+ li r5, MSR_RI
+ mtmsrd r5, 1
+
+ /* Save away checkpinted SPRs. */
+ std r31, VCPU_PPR_TM(r9)
+ std r30, VCPU_DSCR_TM(r9)
+ mflr r5
+ mfcr r6
+ mfctr r7
+ mfspr r8, SPRN_AMR
+ mfspr r10, SPRN_TAR
+ std r5, VCPU_LR_TM(r9)
+ stw r6, VCPU_CR_TM(r9)
+ std r7, VCPU_CTR_TM(r9)
+ std r8, VCPU_AMR_TM(r9)
+ std r10, VCPU_TAR_TM(r9)
+
+ /* Restore r12 as trap number. */
+ lwz r12, VCPU_TRAP(r9)
+
+ /* Save FP/VSX. */
+ addi r3, r9, VCPU_FPRS_TM
+ bl store_fp_state
+ addi r3, r9, VCPU_VRS_TM
+ bl store_vr_state
+ mfspr r6, SPRN_VRSAVE
+ stw r6, VCPU_VRSAVE_TM(r9)
+1:
+ /*
+ * We need to save these SPRs after the treclaim so that the software
+ * error code is recorded correctly in the TEXASR. Also the user may
+ * change these outside of a transaction, so they must always be
+ * context switched.
+ */
+ mfspr r5, SPRN_TFHAR
+ mfspr r6, SPRN_TFIAR
+ mfspr r7, SPRN_TEXASR
+ std r5, VCPU_TFHAR(r9)
+ std r6, VCPU_TFIAR(r9)
+ std r7, VCPU_TEXASR(r9)
+
+ ld r0, PPC_LR_STKOFF(r1)
+ mtlr r0
+ blr
+
+/*
+ * Restore transactional state and TM-related registers.
+ * Called with r4 pointing to the vcpu struct.
+ * This potentially modifies all checkpointed registers.
+ * It restores r1, r2, r4 from the PACA.
+ */
+kvmppc_restore_tm:
+ mflr r0
+ std r0, PPC_LR_STKOFF(r1)
+
+ /* Turn on TM/FP/VSX/VMX so we can restore them. */
+ mfmsr r5
+ li r6, MSR_TM >> 32
+ sldi r6, r6, 32
+ or r5, r5, r6
+ ori r5, r5, MSR_FP
+ oris r5, r5, (MSR_VEC | MSR_VSX)@h
+ mtmsrd r5
+
+ /*
+ * The user may change these outside of a transaction, so they must
+ * always be context switched.
+ */
+ ld r5, VCPU_TFHAR(r4)
+ ld r6, VCPU_TFIAR(r4)
+ ld r7, VCPU_TEXASR(r4)
+ mtspr SPRN_TFHAR, r5
+ mtspr SPRN_TFIAR, r6
+ mtspr SPRN_TEXASR, r7
+
+ ld r5, VCPU_MSR(r4)
+ rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
+ beqlr /* TM not active in guest */
+ std r1, HSTATE_HOST_R1(r13)
+
+ /* Make sure the failure summary is set, otherwise we'll program check
+ * when we trechkpt. It's possible that this might have been not set
+ * on a kvmppc_set_one_reg() call but we shouldn't let this crash the
+ * host.
+ */
+ oris r7, r7, (TEXASR_FS)@h
+ mtspr SPRN_TEXASR, r7
+
+ /*
+ * We need to load up the checkpointed state for the guest.
+ * We need to do this early as it will blow away any GPRs, VSRs and
+ * some SPRs.
+ */
+
+ mr r31, r4
+ addi r3, r31, VCPU_FPRS_TM
+ bl load_fp_state
+ addi r3, r31, VCPU_VRS_TM
+ bl load_vr_state
+ mr r4, r31
+ lwz r7, VCPU_VRSAVE_TM(r4)
+ mtspr SPRN_VRSAVE, r7
+
+ ld r5, VCPU_LR_TM(r4)
+ lwz r6, VCPU_CR_TM(r4)
+ ld r7, VCPU_CTR_TM(r4)
+ ld r8, VCPU_AMR_TM(r4)
+ ld r9, VCPU_TAR_TM(r4)
+ mtlr r5
+ mtcr r6
+ mtctr r7
+ mtspr SPRN_AMR, r8
+ mtspr SPRN_TAR, r9
+
+ /*
+ * Load up PPR and DSCR values but don't put them in the actual SPRs
+ * till the last moment to avoid running with userspace PPR and DSCR for
+ * too long.
+ */
+ ld r29, VCPU_DSCR_TM(r4)
+ ld r30, VCPU_PPR_TM(r4)
+
+ std r2, PACATMSCRATCH(r13) /* Save TOC */
+
+ /* Clear the MSR RI since r1, r13 are all going to be foobar. */
+ li r5, 0
+ mtmsrd r5, 1
+
+ /* Load GPRs r0-r28 */
+ reg = 0
+ .rept 29
+ ld reg, VCPU_GPRS_TM(reg)(r31)
+ reg = reg + 1
+ .endr
+
+ mtspr SPRN_DSCR, r29
+ mtspr SPRN_PPR, r30
+
+ /* Load final GPRs */
+ ld 29, VCPU_GPRS_TM(29)(r31)
+ ld 30, VCPU_GPRS_TM(30)(r31)
+ ld 31, VCPU_GPRS_TM(31)(r31)
+
+ /* TM checkpointed state is now setup. All GPRs are now volatile. */
+ TRECHKPT
+
+ /* Now let's get back the state we need. */
+ HMT_MEDIUM
+ GET_PACA(r13)
+ ld r29, HSTATE_DSCR(r13)
+ mtspr SPRN_DSCR, r29
+ ld r4, HSTATE_KVM_VCPU(r13)
+ ld r1, HSTATE_HOST_R1(r13)
+ ld r2, PACATMSCRATCH(r13)
+
+ /* Set the MSR RI since we have our registers back. */
+ li r5, MSR_RI
+ mtmsrd r5, 1
+
+ ld r0, PPC_LR_STKOFF(r1)
+ mtlr r0
+ blr
+#endif
+
/*
* We come here if we get any exception or interrupt while we are
* executing host real mode code while in guest MMU context.