diff options
Diffstat (limited to 'drivers/acpi/acpica/exfield.c')
-rw-r--r-- | drivers/acpi/acpica/exfield.c | 326 |
1 files changed, 70 insertions, 256 deletions
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index b272c329d45d..e5798f15793a 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 /****************************************************************************** * - * Module Name: exfield - ACPI AML (p-code) execution - field manipulation + * Module Name: exfield - AML execution - field_unit read/write * * Copyright (C) 2000 - 2018, Intel Corp. * @@ -16,64 +16,62 @@ #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exfield") -/* Local prototypes */ -static u32 -acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length); +/* + * This table maps the various Attrib protocols to the byte transfer + * length. Used for the generic serial bus. + */ +#define ACPI_INVALID_PROTOCOL_ID 0x80 +#define ACPI_MAX_PROTOCOL_ID 0x0F +const u8 acpi_protocol_lengths[] = { + ACPI_INVALID_PROTOCOL_ID, /* 0 - reserved */ + ACPI_INVALID_PROTOCOL_ID, /* 1 - reserved */ + 0x00, /* 2 - ATTRIB_QUICK */ + ACPI_INVALID_PROTOCOL_ID, /* 3 - reserved */ + 0x01, /* 4 - ATTRIB_SEND_RECEIVE */ + ACPI_INVALID_PROTOCOL_ID, /* 5 - reserved */ + 0x01, /* 6 - ATTRIB_BYTE */ + ACPI_INVALID_PROTOCOL_ID, /* 7 - reserved */ + 0x02, /* 8 - ATTRIB_WORD */ + ACPI_INVALID_PROTOCOL_ID, /* 9 - reserved */ + 0xFF, /* A - ATTRIB_BLOCK */ + 0xFF, /* B - ATTRIB_BYTES */ + 0x02, /* C - ATTRIB_PROCESS_CALL */ + 0xFF, /* D - ATTRIB_BLOCK_PROCESS_CALL */ + 0xFF, /* E - ATTRIB_RAW_BYTES */ + 0xFF /* F - ATTRIB_RAW_PROCESS_BYTES */ +}; /******************************************************************************* * - * FUNCTION: acpi_ex_get_serial_access_length + * FUNCTION: acpi_ex_get_protocol_buffer_length * - * PARAMETERS: accessor_type - The type of the protocol indicated by region + * PARAMETERS: protocol_id - The type of the protocol indicated by region * field access attributes - * access_length - The access length of the region field + * return_length - Where the protocol byte transfer length is + * returned * - * RETURN: Decoded access length + * RETURN: Status and decoded byte transfer length * * DESCRIPTION: This routine returns the length of the generic_serial_bus * protocol bytes * ******************************************************************************/ -static u32 -acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length) +acpi_status +acpi_ex_get_protocol_buffer_length(u32 protocol_id, u32 *return_length) { - u32 length; - - switch (accessor_type) { - case AML_FIELD_ATTRIB_QUICK: - - length = 0; - break; - - case AML_FIELD_ATTRIB_SEND_RCV: - case AML_FIELD_ATTRIB_BYTE: - - length = 1; - break; - - case AML_FIELD_ATTRIB_WORD: - case AML_FIELD_ATTRIB_WORD_CALL: - - length = 2; - break; - case AML_FIELD_ATTRIB_MULTIBYTE: - case AML_FIELD_ATTRIB_RAW_BYTES: - case AML_FIELD_ATTRIB_RAW_PROCESS: + if ((protocol_id > ACPI_MAX_PROTOCOL_ID) || + (acpi_protocol_lengths[protocol_id] == ACPI_INVALID_PROTOCOL_ID)) { + ACPI_ERROR((AE_INFO, + "Invalid Field/AccessAs protocol ID: 0x%4.4X", + protocol_id)); - length = access_length; - break; - - case AML_FIELD_ATTRIB_BLOCK: - case AML_FIELD_ATTRIB_BLOCK_CALL: - default: - - length = ACPI_GSBUS_BUFFER_SIZE - 2; - break; + return (AE_AML_PROTOCOL); } - return (length); + *return_length = acpi_protocol_lengths[protocol_id]; + return (AE_OK); } /******************************************************************************* @@ -98,10 +96,8 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, { acpi_status status; union acpi_operand_object *buffer_desc; - acpi_size length; void *buffer; - u32 function; - u16 accessor_type; + u32 buffer_length; ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); @@ -132,60 +128,11 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, ACPI_ADR_SPACE_GSBUS || obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_IPMI)) { - /* - * This is an SMBus, GSBus or IPMI read. We must create a buffer to - * hold the data and then directly access the region handler. - * - * Note: SMBus and GSBus protocol value is passed in upper 16-bits - * of Function - */ - if (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_SMBUS) { - length = ACPI_SMBUS_BUFFER_SIZE; - function = - ACPI_READ | (obj_desc->field.attribute << 16); - } else if (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_GSBUS) { - accessor_type = obj_desc->field.attribute; - length = - acpi_ex_get_serial_access_length(accessor_type, - obj_desc->field. - access_length); - - /* - * Add additional 2 bytes for the generic_serial_bus data buffer: - * - * Status; (Byte 0 of the data buffer) - * Length; (Byte 1 of the data buffer) - * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) - */ - length += 2; - function = ACPI_READ | (accessor_type << 16); - } else { /* IPMI */ - - length = ACPI_IPMI_BUFFER_SIZE; - function = ACPI_READ; - } - - buffer_desc = acpi_ut_create_buffer_object(length); - if (!buffer_desc) { - return_ACPI_STATUS(AE_NO_MEMORY); - } - - /* Lock entire transaction if requested */ - - acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); - - /* Call the region handler for the read */ - status = acpi_ex_access_region(obj_desc, 0, - ACPI_CAST_PTR(u64, - buffer_desc-> - buffer.pointer), - function); + /* SMBus, GSBus, IPMI serial */ - acpi_ex_release_global_lock(obj_desc->common_field.field_flags); - goto exit; + status = acpi_ex_read_serial_bus(obj_desc, ret_buffer_desc); + return_ACPI_STATUS(status); } /* @@ -198,14 +145,14 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, * * Note: Field.length is in bits. */ - length = + buffer_length = (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); - if (length > acpi_gbl_integer_byte_width) { + if (buffer_length > acpi_gbl_integer_byte_width) { /* Field is too large for an Integer, create a Buffer instead */ - buffer_desc = acpi_ut_create_buffer_object(length); + buffer_desc = acpi_ut_create_buffer_object(buffer_length); if (!buffer_desc) { return_ACPI_STATUS(AE_NO_MEMORY); } @@ -218,47 +165,24 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, return_ACPI_STATUS(AE_NO_MEMORY); } - length = acpi_gbl_integer_byte_width; + buffer_length = acpi_gbl_integer_byte_width; buffer = &buffer_desc->integer.value; } if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_GPIO)) { - /* - * For GPIO (general_purpose_io), the Address will be the bit offset - * from the previous Connection() operator, making it effectively a - * pin number index. The bit_length is the length of the field, which - * is thus the number of pins. - */ - ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, - "GPIO FieldRead [FROM]: Pin %u Bits %u\n", - obj_desc->field.pin_number_index, - obj_desc->field.bit_length)); - - /* Lock entire transaction if requested */ - acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); + /* General Purpose I/O */ - /* Perform the write */ - - status = - acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, - ACPI_READ); - - acpi_ex_release_global_lock(obj_desc->common_field.field_flags); - if (ACPI_FAILURE(status)) { - acpi_ut_remove_reference(buffer_desc); - } else { - *ret_buffer_desc = buffer_desc; - } - return_ACPI_STATUS(status); + status = acpi_ex_read_gpio(obj_desc, buffer); + goto exit; } ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", obj_desc, obj_desc->common.type, buffer, - (u32) length)); + buffer_length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", obj_desc->common_field.bit_length, @@ -271,7 +195,7 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, /* Read from the field */ - status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length); + status = acpi_ex_extract_from_field(obj_desc, buffer, buffer_length); acpi_ex_release_global_lock(obj_desc->common_field.field_flags); exit: @@ -304,11 +228,8 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, union acpi_operand_object **result_desc) { acpi_status status; - u32 length; + u32 buffer_length; void *buffer; - union acpi_operand_object *buffer_desc; - u32 function; - u16 accessor_type; ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); @@ -331,130 +252,25 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, } } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_SMBUS - || obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_GSBUS - || obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_IPMI)) { - /* - * This is an SMBus, GSBus or IPMI write. We will bypass the entire - * field mechanism and handoff the buffer directly to the handler. - * For these address spaces, the buffer is bi-directional; on a - * write, return data is returned in the same buffer. - * - * Source must be a buffer of sufficient size: - * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or - * ACPI_IPMI_BUFFER_SIZE. - * - * Note: SMBus and GSBus protocol type is passed in upper 16-bits - * of Function - */ - if (source_desc->common.type != ACPI_TYPE_BUFFER) { - ACPI_ERROR((AE_INFO, - "SMBus/IPMI/GenericSerialBus write requires " - "Buffer, found type %s", - acpi_ut_get_object_type_name(source_desc))); - - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); - } - - if (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_SMBUS) { - length = ACPI_SMBUS_BUFFER_SIZE; - function = - ACPI_WRITE | (obj_desc->field.attribute << 16); - } else if (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_GSBUS) { - accessor_type = obj_desc->field.attribute; - length = - acpi_ex_get_serial_access_length(accessor_type, - obj_desc->field. - access_length); - - /* - * Add additional 2 bytes for the generic_serial_bus data buffer: - * - * Status; (Byte 0 of the data buffer) - * Length; (Byte 1 of the data buffer) - * Data[x-1]: (Bytes 2-x of the arbitrary length data buffer) - */ - length += 2; - function = ACPI_WRITE | (accessor_type << 16); - } else { /* IPMI */ - - length = ACPI_IPMI_BUFFER_SIZE; - function = ACPI_WRITE; - } - - if (source_desc->buffer.length < length) { - ACPI_ERROR((AE_INFO, - "SMBus/IPMI/GenericSerialBus write requires " - "Buffer of length %u, found length %u", - length, source_desc->buffer.length)); - - return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); - } - - /* Create the bi-directional buffer */ - - buffer_desc = acpi_ut_create_buffer_object(length); - if (!buffer_desc) { - return_ACPI_STATUS(AE_NO_MEMORY); - } - - buffer = buffer_desc->buffer.pointer; - memcpy(buffer, source_desc->buffer.pointer, length); - - /* Lock entire transaction if requested */ + ACPI_ADR_SPACE_GPIO)) { - acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); + /* General Purpose I/O */ - /* - * Perform the write (returns status and perhaps data in the - * same buffer) - */ - status = - acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, function); - acpi_ex_release_global_lock(obj_desc->common_field.field_flags); - - *result_desc = buffer_desc; + status = acpi_ex_write_gpio(source_desc, obj_desc, result_desc); return_ACPI_STATUS(status); } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_GPIO)) { - /* - * For GPIO (general_purpose_io), we will bypass the entire field - * mechanism and handoff the bit address and bit width directly to - * the handler. The Address will be the bit offset - * from the previous Connection() operator, making it effectively a - * pin number index. The bit_length is the length of the field, which - * is thus the number of pins. - */ - if (source_desc->common.type != ACPI_TYPE_INTEGER) { - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); - } - - ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, - "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n", - acpi_ut_get_type_name(source_desc->common. - type), - source_desc->common.type, - (u32)source_desc->integer.value, - obj_desc->field.pin_number_index, - obj_desc->field.bit_length)); - - buffer = &source_desc->integer.value; - - /* Lock entire transaction if requested */ - - acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); + ACPI_ADR_SPACE_SMBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_IPMI)) { - /* Perform the write */ + /* SMBus, GSBus, IPMI serial */ status = - acpi_ex_access_region(obj_desc, 0, (u64 *)buffer, - ACPI_WRITE); - acpi_ex_release_global_lock(obj_desc->common_field.field_flags); + acpi_ex_write_serial_bus(source_desc, obj_desc, + result_desc); return_ACPI_STATUS(status); } @@ -464,23 +280,22 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, case ACPI_TYPE_INTEGER: buffer = &source_desc->integer.value; - length = sizeof(source_desc->integer.value); + buffer_length = sizeof(source_desc->integer.value); break; case ACPI_TYPE_BUFFER: buffer = source_desc->buffer.pointer; - length = source_desc->buffer.length; + buffer_length = source_desc->buffer.length; break; case ACPI_TYPE_STRING: buffer = source_desc->string.pointer; - length = source_desc->string.length; + buffer_length = source_desc->string.length; break; default: - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } @@ -488,7 +303,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", source_desc, acpi_ut_get_type_name(source_desc->common.type), - source_desc->common.type, buffer, length)); + source_desc->common.type, buffer, buffer_length)); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", @@ -505,8 +320,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, /* Write to the field */ - status = acpi_ex_insert_into_field(obj_desc, buffer, length); + status = acpi_ex_insert_into_field(obj_desc, buffer, buffer_length); acpi_ex_release_global_lock(obj_desc->common_field.field_flags); - return_ACPI_STATUS(status); } |